Approaching the Magnetic Singularity
June 21, 2019 | MITEstimated reading time: 5 minutes
In many materials, electrical resistance and voltage change in the presence of a magnetic field, usually varying smoothly as the magnetic field rotates. This simple magnetic response underlies many applications including contactless current sensing, motion sensing, and data storage. In a crystal, the way that the charge and spin of its electrons align and interact underlies these effects.
Image Caption: A domain wall (gray panel at center) separates regions with different spin orientations (green and blue arrows). MIT researchers discovered that a magnetic field applied at one particular angle through a single crystal of a new magnetic quantum material makes it harder for electrons to cross this domain wall. Illustration: Leon Balents
Utilizing the nature of the alignment, called symmetry, is a key ingredient in designing a functional material for electronics and the emerging field of spin-based electronics (spintronics).
Recently a team of researchers from MIT, the French National Center for Scientific Research (CNRS) and École Normale Supérieure (ENS) de Lyon, University of California at Santa Barbara (UCSB), the Hong Kong University of Science and Technology (HKUST), and NIST Center for Neutron Research, led by Joseph G. Checkelsky, assistant professor of physics at MIT, has discovered a new type of magnetically driven electrical response in a crystal composed of cerium, aluminum, germanium, and silicon.
At temperatures below 5.6 kelvins (corresponding to -449.6 degrees Fahrenheit), these crystals show a sharp enhancement of electrical resistivity when the magnetic field is precisely aligned within an angle of 1 degree along the high symmetry direction of the crystal. This effect, which the researchers have named “singular angular magnetoresistance,” can be attributed to the symmetry — in particular, the ordering of the cerium atoms’ magnetic moments.
Novel Response and Symmetry
Like an old-fashioned clock designed to chime at 12:00 and at no other position of the hands, the newly discovered magnetoresistance only occurs when the direction, or vector, of the magnetic field is pointed straight in line with the high-symmetry axis in the material’s crystal structure. Turn the magnetic field more than a degree away from that axis and the resistance drops precipitously.
"Rather than responding to the individual components of the magnetic field like a traditional material, here the material responds to the absolute vector direction," says Takehito Suzuki, a research scientist in the Checkelsky group who synthesized these materials and discovered the effect. "The observed sharp enhancement, which we call singular angular magnetoresistance, implies a distinct state realized only under those conditions."
Magnetoresistance is a change in the electrical resistance of a material in response to an applied magnetic field. A related effect known as giant magnetoresistance is the basis for modern computer hard drives and its discoverers were awarded the Nobel Prize in 2007.
"The observed enhancement is so highly confined with the magnetic field along the crystalline axis in this material that it strongly suggests symmetry plays a critical role,” Lucile Savary, permanent CNRS researcher at ENS de Lyon, adds. Savary was a Betty and Gordon Moore Postdoctoral Fellow at MIT from 2014-17, when the team started collaborating.
To elucidate the role of the symmetry, it is crucial to see the alignment of the magnetic moments, for which Suzuki and Jeffrey Lynn, NIST fellow, performed powder neutron diffraction studies on the BT-7 triple axis spectrometer at the NIST Center for Neutron Research (NCNR). The research team used the NCNR’s neutron diffraction capabilities to determine the material’s magnetic structure, which plays an essential role in understanding its topological properties and nature of the magnetic domains. A "topological state" is one that is protected from ordinary disorder. This was a key factor in unraveling the mechanism of the singular response.
Based on the observed ordering pattern, Savary and Leon Balents, professor and permanent member of Kavli Institute of Theoretical Physics at UCSB, constructed a theoretical model where the spontaneous symmetry-breaking caused by the magnetic-moment ordering couples to the magnetic field and the topological electronic structure. As a consequence of the coupling, switching between the uniformly ordered low- and high-resistivity states can be manipulated by the precise control of the magnetic field direction.
“The agreement of the model with the experimental results is outstanding and was the key to understanding what was a mysterious experimental observation,” says Checkelsky, the paper’s senior author.
Page 1 of 2
Suggested Items
AIM Solder Appoints Mhanny Aguillo as Southeast Asia Technical Sales Manager
05/31/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials, is pleased to announce the appointment of Mhanny Aguillo as the Southeast Asia Technical Sales Manager.
Underconstraining Your Materials? Leave It to the Experts
05/30/2024 | I-Connect007 Editorial TeamWith traditional laminates now sporting improved resin systems, some OEMs are choosing various flavors of FR-4 instead of high-speed laminates for their high-speed designs—even RF applications. Avoiding overconstraining your materials in high-speed products can lead to considerable cost savings, not to mention a more streamlined trip through fabrication.
Elementary, Mr. Watson: Pushing Design Boundaries
05/29/2024 | John Watson -- Column: Elementary, Mr. WatsonOverconstraint: What a concept. Our first thoughts would be: What are we hurting by overconstraining a design? Isn't it better to be safe than sorry? What is meant by overconstraint? It means to apply excessive constraints. In engineering and mathematics, it's used when there are too many simultaneous equations to result in an exact solution. For example, fitting a line to many points is overconstrained because a line cannot be drawn simultaneously through all of the points. In PCB design, overconstraints always occur, including dimensional, electrical, manufacturing, and timing constraints. The list goes on.
Indium Corporation Expert to Present at MiNaPAD 2024
05/27/2024 | Indium CorporationIndium Corporation’s Senior Global Product Manager for Semiconductor and Advanced Materials, Sze Pei Lim, will deliver two technical presentations at the 11th Micro/Nano-Electronics Packaging and Assembly, Design and Manufacturing (MiNaPAD) Forum, taking place June 19-20 in Grenoble, France.
IDTechEx Asks if Silicon Anodes Are the Key to Mass EV Adoption
05/24/2024 | PRNewswireMaximizing energy density has been one key area of focus in electric vehicle battery development. Optimizations in cell and battery pack designs, alongside the use of higher nickel NMC and NCA cathodes, have led to steady improvement in battery energy density over the past 10-15 years.