Alta Devices Scaling up Solar Production to Disrupt Economics of Small Satellite Manufacturing
August 5, 2019 | Business WireEstimated reading time: 2 minutes

Alta Devices has announced it is scaling up solar production to meet growing demand for small satellites (SmallSats). Tens of thousands of low-earth orbiting (LEO) SmallSats are expected to be launched over the next decade. They will all rely on the sun for power. Alta Devices solar material has the potential to meet the specific needs of this SmallSat boom.
Solar is the single most expensive hardware component in a small satellite. Alta Devices has developed proprietary equipment to mass produce its thin film gallium arsenide. This equipment is being scaled up to produce at much higher volumes and lower cost than other space solar manufacturers. Alta’s ability to produce at this scale is unique and can substantially lower the cost of each SmallSat.
Furthermore, Alta Devices flexible solar cells provide a new level of mechanical and design flexibility for the satellite industry. Alta’s technology can be mounted to thin, flexible, low-mass deployable structures allowing creative design approaches to maximizing the solar array. These include coiled carbon fiber booms, flat-packed, polymer-based accordioned arrays, or even inflatable structures. This allows more compact design of the high-power solar arrays required to power high-speed LEO communication satellites.
Finally, traditional photovoltaic assemblies (PVAs) are composed of hundreds or thousands of small solar cells, each protected with a tile of glass, connected to each other through individual metallic welds, which are then carefully grouted to prevent electrical arcing and attack from the space environment. In contrast, Alta’s space product will consist of flexible, glass-free units that are 10 to 100 times larger, thus eliminating breakage, lowering cost and having no exposed electrical interconnects. Alta’s space product will enable bonding to customer substrates using a large-area, high-volume vacuum bonding process, as opposed to mounting individual cells or CICs (Coverglass Interconnected Cells).
Overall, Alta’s goal is to provide LEO satellite manufacturers with a better balance of solar conversion efficiency, reduced array weight, cell durability, speed of deployment, and cost compared with conventional space solar cells.
The Small Satellite Market for LEO Constellations
According to filings disclosed by the Federal Communications Commission, over 15,000 LEO SmallSats are planned for deployment in the near future. The applications of these satellites include communications, scientific research, military intelligence, remote sensing, and new technology development.
Over the coming years, Alta Devices plans to produce tens of megawatts of solar. Manufacturing will take place at Alta Devices corporate facility in Sunnyvale, California and at an international manufacturing facility. In April this year, Alta Devices solar was used on a successful mission to power over 60 ThinSats launched from the NASA Wallops Flight Facility in Virginia. Alta Devices is working with top satellite manufacturers for the deployment of its technology on several upcoming launches.
Alta Devices CEO, Jian Ding stated, “Now that we are established in the HALE UAV/HAPS market, we are committed to enabling LEO satellite projects with our unique technology. We believe our solution will meet the needs of this fast-growing market.”
About Alta Devices
Alta Devices is Empowering Autonomy™ by delivering the world’s most efficient, thin and flexible mobile power technology. By converting light of any kind into electricity, Alta Devices AnyLight™ power technology extends the energy source of a system, and in many cases, completely cuts the traditional power cord. The solution can be completely integrated into the final system, and is ideal for use in small satellites, unmanned systems, consumer electronics, sensors, automotive, remote exploration, or anywhere size, weight, and mobility matter. Alta Devices holds world records for energy conversion efficiency and is headquartered in Sunnyvale, CA.
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Circus SE Set for High-Volume Market Entry in the Defense Sector
10/17/2025 | BUSINESS WIRECircus SE a global technology leader in AI robotics for autonomous nutrition systems and troop supply, is expanding its global production network as part of its high-volume market entry into the defense sector.
China Expands Rare Earth Export Restrictions, Tightening Grip on Global Supply Chains
10/16/2025 | I-Connect007 Editorial TeamChina sharply expanded its rare earth export restrictions on Oct. 9, adding additional elements and refining technologies to its control list while imposing stricter rules on foreign users in the defense and semiconductor industries.
SAMI Advanced Electronics Company Launches “Remal” Computer Manufacturing Project in Partnership with HP and Foxconn
10/15/2025 | SAMI-AECSAMI Advanced Electronics Company (SAMI-AEC), a wholly owned subsidiary of Saudi Arabian Military Industries (SAMI), proudly announced the launch of the “Remal” project for computer manufacturing, in strategic partnership with HP and Foxconn.
The Right Approach: Electro-Tek—A Williams Family Legacy, Part 1
10/15/2025 | Steve Williams -- Column: The Right ApproachThere is no bronze bust in the lobby or portrait in the conference room of Electro-Tek's founder—my Dad, Charles “Chuck” Williams—so with the facility closing last year after 56 years, I feel it is time to tell the story. Chuck Williams founded Electro-Tek in 1968 in our basement, eventually moving into the second floor of an old 1913 building in downtown Milwaukee that is still standing (the first of three eventual facilities).
LPKF Joins productronica’s 50th Anniversary, Showcasing Laser Technology for Electronics Manufacturing
10/10/2025 | LPKF Laser & ElectronicsLPKF Laser & Electronics invites visitors to productronica 2025 in Munich from November 18 to 21. At booth 305 in hall B2, the company will present its portfolio of modern laser technologies for the electronics industry live – from prototyping systems and high-performance depaneling to laser plastic welding for electronic housings and thin glass processing for advanced packaging.