Real-Time 4k Video Transmission Made Possible with High-Speed Millimetre Wave Technology
August 22, 2019 | CORDISEstimated reading time: 2 minutes

The advent of 5G broadband will open a whole new range of possibilities, such as 360-degree video streaming and immersive virtual reality applications. Perhaps more important are all the new services that will arise as a result. Imagine a world in which all devices are wirelessly connected, with drones monitoring traffic and assisting in search and rescue missions. A world in which autonomous vehicles communicate with each other, and wearable devices provide real-time health monitoring and alert doctors in an emergency.
Steps toward such a reality have been taken in the EU-funded 5G MiEdge project launched in 2016. The work done has contributed to the development of a mmW wireless communication system that has made long-distance communication possible. Using this system, 4K uncompressed video has been transmitted in real time from a drone. The video transmission system developed has a mmW wireless communication device with a small, light lens antenna that can be fitted to a drone. An additional advantage is the significantly shorter delay compared to conventional compressed transmission.
Live Drone Test on 5G Network
The project team conducted a demonstration in which they used a drone to take video in 4K. The video was transmitted in real time from more than 100 m away to an access point on the ground. In this demonstration, the roadside units (RSUs) used 3D-LiDAR sensor systems to create a dynamic 3D map that was shared with other RSUs via mmW communication. The vehicle communicated with the RSU to receive a merged, global, real-time, dynamic 3D map that extended its area of perception, contributing to better traffic safety and efficiency.
This wireless communication system is based on the technology developed by the project to overcome the weaknesses of mmWs and mobile edge computing (MEC) that have garnered interest for use in 5G networks. Despite their promising ability to enable high-speed communication, mmWs have high attenuation levels, which means that the radio signal becomes weaker over distances. Another issue was backhauling—getting data to a point from which it can be distributed over a network—since 10 Gigabit Ethernet backhaul can’t be provided everywhere. While MEC is capable of bypassing the backhaul networks’ limited capacity by making cloud computing capabilities and IT service environments possible at the edge of a network, it has other shortcomings. Namely, reallocation of computation resources isn’t easily achieved on demand while still meeting the strict latency constraints expected in 5G networks.
Project partners compensated for each system’s deficiencies by combining mmW access and MEC to form the mmW edge cloud, developing a novel control pane that can collect and process user information so that resources can be allocated proactively, and creating a user/application-centric 5G network.
The 5G MiEdge (5G MiEdge: Millimeter-wave Edge cloud as an enabler for 5G ecosystem) technology is being demonstrated in other use case scenarios besides automated driving. One is ultra-fast wireless connection in airports, train stations and shopping malls to facilitate ultra-high-speed content downloads and massive video streaming. Other scenarios include wireless communication for passengers on trains, buses and planes, public video surveillance and 3D live video broadcasts for dynamic crowds in outdoor city areas. The project also intends to showcase its technologies at the 2020 Summer Olympics in Tokyo.
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
EV Group Achieves Breakthrough in Hybrid Bonding Overlay Control for Chiplet Integration
09/12/2025 | EV GroupEV Group (EVG), a leading provider of innovative process solutions and expertise serving leading-edge and future semiconductor designs and chip integration schemes, today unveiled the EVG®40 D2W—the first dedicated die-to-wafer overlay metrology platform to deliver 100 percent die overlay measurement on 300-mm wafers at high precision and speeds needed for production environments. With up to 15X higher throughput than EVG’s industry benchmark EVG®40 NT2 system designed for hybrid wafer bonding metrology, the new EVG40 D2W enables chipmakers to verify die placement accuracy and take rapid corrective action, improving process control and yield in high-volume manufacturing (HVM).
AV Switchblade 600 Loitering Munition System Achieves Pivotal Milestone with First-Ever Air Launch from MQ-9A
09/12/2025 | BUSINESS WIREAeroVironment, Inc. (AV) a global leader in intelligent, multi-domain autonomous systems, announced its Switchblade 600 loitering munition system (LMS) has achieved a significant milestone with its first-ever air launch from an MQ-9A Reaper Unmanned Aircraft System (UAS).
United Electronics Corporation Unveils Revolutionary CIMS Galaxy 30 Automated Optical Inspection System
09/11/2025 | United Electronics CorporationUnited Electronics Corporation (UEC) today announced the launch of its new groundbreaking CIMS Galaxy 30 Automated Optical Inspection (AOI) machine, setting a new industry standard for precision electronics manufacturing quality control. The Galaxy 30, developed and manufactured by CIMS, represents a significant leap forward in inspection technology, delivering exceptional speed improvements and introducing cutting-edge artificial intelligence capabilities.
IPS, SEL Raise the Bar for ENIG Automation in North America
09/11/2025 | Mike Brask, IPSIPS has installed a state-of-the-art automated ENIG plating line at Schweitzer Engineering Laboratories’ PCB facility in Moscow, Idaho. The 81-foot, fully enclosed line sets a new standard for automation, safety, and efficiency in North American PCB manufacturing and represents one of the largest fully enclosed final finish lines in operation.
Smart Automation: Odd-form Assembly—Dedicated Insertion Equipment Matters
09/09/2025 | Josh Casper -- Column: Smart AutomationLarge, irregular, or mechanically unique parts, often referred to as odd-form components, have never truly disappeared from electronics manufacturing. While many in the industry have been pursuing miniaturization, faster placement speeds, and higher-density PCBs, certain market sectors are moving in the opposite direction.