It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Aismalibar to Speak at Cooling Days Conference
October 7, 2019 | AismalibarEstimated reading time: 1 minute
Aismalibar will speak and exhibit at this year’s “Cooling Days” Conference in Würzburg, Germany on October 22 and 23. The conference will focus on how to cool electronics using the latest generation PCBs.
Aismalibar will exhibit COBRITHERM ULTRATHIN at Cooling Days. The product is a high thermal conductivity metal cladding used for car headlights and high power LEDs > 2W.
The demand for dissipation rates and higher working temperatures is increasing rapidly. Due to this continuous demand, Aismalibar has developed a new Cobritherm with an innovative ultra-thin dielectric layer that provides higher thermal efficiency and excellent working temperature. With a thickness of only 35 microns, this new product reduces thermal resistance to 0.11 Kcm2 / W (0.017 Kin2 / W), which offers excellent thermal dissipation conditions for high power LED assembly.
Aismalibar will hold a conference given by Uwe C. Lemke, a representative of the company in Germany, Austria and Switzerland. The conference will focus on the importance of the base material with which the printed circuit board is created, especially when cooling an electronic system.
About Aismalibar
Aismalibar was one of the first IMS laminate manufacturers in the world and was the first in Europe. Aismalibar is proud to introduce their material to the North American market in 2012. Their product IMS Cobritherm is a qualified and recognized Insulated Metal Substrate which gives the best thermal management solutions with high thermal conductivity, low thermal impedance and high dielectric capacity. Aismalibar has implement a 100% proof test with 1-3KV (High Pot Test) to all IMS laminates coming out of their plant. This is the only way to insure the dialectical strength is perfect and that production problems are detected before PCBs arrive to the end user.
Share on:
Suggested Items
Trouble in Your Tank: Materials for PWB Fabrication—Drillability and Metallization
07/16/2024 | Michael Carano -- Column: Trouble in Your TankLaminate materials are the building blocks on which printed circuit boards are manufactured. Circuit board designers rely on the critical electrical properties of the materials to design the interconnects, and with the drive toward IoT (internet of things), autonomous driving, and virtual and augmented reality, material properties take on a very high level of importance.
Don’t Overconstrain Your Board Materials
07/02/2024 | I-Connect007 Editorial TeamWhen we started planning May’s issue, which centers on the use of traditional laminates in certain high-frequency PCBs, we knew we had to interview Kris Moyer and Ed Kelley together. Kris teaches advanced PCB design classes for IPC, and Ed is the former CTO of Isola and founder of Four Peaks Innovation. What ensued was a wide-ranging discussion on the evolution of “standard” PCB laminates and the recent trend by some OEMs to use these materials in high-frequency and even RF boards.
Underconstraining Your Materials? Leave It to the Experts
05/30/2024 | I-Connect007 Editorial TeamWith traditional laminates now sporting improved resin systems, some OEMs are choosing various flavors of FR-4 instead of high-speed laminates for their high-speed designs—even RF applications. Avoiding overconstraining your materials in high-speed products can lead to considerable cost savings, not to mention a more streamlined trip through fabrication.
The Shaughnessy Report: Unlock Your High-speed Material Constraints
05/15/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportThe world of PCB materials used to be a fairly simple one. It was divided into two groups: the “traditional” laminates, often called FR-4, and the high-speed laminates developed especially for high-speed PCBs. These were two worlds that usually didn’t collide. But then traditional laminates started getting better, and high-speed designers and design engineers took notice and started to reconsider what FR-4 could be used for.
Breaking High-speed Material Constraints: Design007 Magazine — May 2024
05/14/2024 | I-Connect007 Editorial TeamDo you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems instead of high-speed materials, saving time and money while streamlining the fab process. In the May 2024 issue of Design007 Magazine, our contributors explain how to avoid overconstraining your materials when working with high-speed boards.