New Device Uses Sound Waves to Improve Diagnosis of Cancer
October 23, 2019 | University of TexasEstimated reading time: 2 minutes
Researchers at the College of Engineering at Texas A&M have created an acoustofluidic cytometer that uses sound waves to measure the stiffness and compressibility of cancer cells. This not only will aid in the classification of cancer types, but will also make diagnosis more efficient and observable.
The team is led by Arum Han, professor and Presidential Impact Fellow in the Department of Electrical and Computer Engineering at Texas A&M University, and Han Wang, professor at Tsinghua University. Their recent publication in the journal Lab on a Chip was featured in an article on PhysicsWorld.
So why is it important to understand the biophysical properties of cancer cells?
Characteristics that set these cells apart from their healthy counterparts offer insight into the disease that is invaluable to the future of cancer research.
“For example, if you’re trying to figure out if a biopsy contains cancer cells or not, you might be able to look at the mechanical properties of the cells to determine if cancer is present in the sample,” said Han.
He went on to explain another scenario: how the biophysical properties of cancerous cells change as they advance through stages and metastasize.
“One hypothesis is that as cancer cells progress, they become softer, which makes it easier for them to circulate and spread inside a human body,” said Han. “So if a late stage cancer has an identifiably different biophysical property than earlier stages, it could be possible to tell what stage a cancer is in by simply measuring the mechanical property of cell types. This could be used to quantify the stages of cancer.”
While many microfluid devices use pushing mechanisms and microstructures to measure the compressibility and stiffness of cancer cells, Han’s acoustofluidic cytometer utilizes sound waves.
Acoustic waves traveling in a rectangular microfluidic channel form a “standing wave,” which creates zones called acoustic pressure nodes. Cells flowing inside the channel will move toward and gather near these pressure nodes. The speed at which the cells move varies depending on how soft or firm they are, revealing their compressibility and stiffness without the need for any complex mechanisms.
By observing how cancer cells react under the influence of acoustic sound waves, researchers can gain insight about the cells’ mechanical properties, which can then be correlated to different stages of cancer.
“The simplicity of our device and its operation is what makes this particular work very exciting compared to previous methods of measurement, which require very expensive equipment or very complicated microstructures to work,” said Han.
Suggested Items
INVISIO Secures SEK 115 Million Order for Intercom and Dismounted Soldier Systems
12/16/2024 | INVISIOINVISIO has received a significant order from an existing European customer for its Intercom and Dismounted Soldier systems. Deliveries are set to commence immediately and are expected to be completed by Q1 2025.
Mobile Robots Set to Reach 2.8 Million Shipments by 2030 as Applications Expand Across Industries
12/13/2024 | ABI ResearchMobile robot shipments will remain the highest across all robot form factors. ABI Research, a global technology intelligence firm, forecasts shipments to grow from 547,000 units in 2023 to 2.79 million by 2030, a CAGR of 24.1%.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Real Time with... electronica 2024: STARTEAM GLOBAL Meeting Challenges Head-on
12/11/2024 | Real Time with... electronicaSTARTEAM GLOBAL CEO Daniel Jacob and CTO Martin Schneider speak with Pete Starkey at electronica 2024 about their global presence in China, Thailand, and Europe, and how additive manufacturing and inkjet printing are keeping this PCB manufacturer at the forefront of technology. They’re excited about sustainability, the future, and competing on the world stage.
Sondrel Now Shipping Chips as Part of a Complete Turnkey Project
12/09/2024 | SondrelSondrel has announced that it is now shipping finished chips to a US customer as part of a full turnkey contract of concept to silicon. The chips are accelerators for AI, which is one of Sondrel’s speciality areas as it requires high performance, ultra-complex custom designs on leading edge nodes.