United Airlines Orders 50 Airbus A321XLRs for Transatlantic Route Expansion
December 9, 2019 | AirbusEstimated reading time: 2 minutes

United Airlines has placed a firm order for 50 Airbus A321XLR aircraft as it begins to phase out older models and launches an expansion of transatlantic routes from its key U.S. hubs in Newark/New York and Washington, D.C. United plans to take delivery of the first A321XLR in 2024 and expects to begin international service with the aircraft in 2025.
“The new Airbus A321XLR aircraft is an ideal one-for-one replacement for the older, less-efficient aircraft currently operating between some of the most vital cities in our intercontinental network,” said Andrew Nocella, United’s Executive Vice President and Chief Commercial Officer. “In addition to strengthening our ability to fly more efficiently, the A321XLR opens potential new destinations to further develop our route network and provide customers with more options to travel the globe.”
“We are delighted to be re-United with our friends in Chicago and thank them for their trust. The selection of the A321XLR by the leadership of United Airlines is a ringing endorsement of the range, payload, and fuel efficiency that Airbus incorporated into this state-of-the-art aircraft,” said Christian Scherer, Airbus Chief Commercial Officer. “The exceptional versatility and performance of the A321XLR enable new operational efficiencies that flow to the airline’s bottom line.”
The A321XLR is the next evolutionary step in the A320neo/A321neo family of aircraft, meeting market requirements for increased range and payload in a single-aisle aircraft, and creating more value for the airlines by enabling economically viable service on longer routes than any comparable aircraft model. It will allow service from the U.S. East Coast to a much larger selection of European destinations.
The A321XLR will deliver an unprecedented narrow-body aircraft range of up to 4,700nm, with 30% lower fuel consumption per seat compared with previous-generation competitor jets. It will have a maximum takeoff weight (MTOW) of 101 metric tonnes, while takeoff, climb, and flight performance will change little from the A321neo.
The A321XLR will be operated by the same crew, powered by the same engines and have the same cabin as the A321neo, with more than 90% commonality. Combining the A321neo’s two rear center fuel tanks into one adds fuel capacity and reduces structural weight. Other significant changes include structural reinforcements and modified landing gears for the increased MTOW, increased braking capability, higher tire speed, and additional flap and slat configurations.
With the Airbus Cabin Flex fuselage, the A321XLR will accommodate a variety of seating classes and configurations suitable for longer flights.
At the end of October 2019, the A320neo Family had accumulated more than 7,000 firm orders from over 110 customers worldwide.
Suggested Items
Standard of Excellence: Delivering Excellence—A Daily Goal
06/25/2025 | Anaya Vardya -- Column: Standard of ExcellenceDelivering excellence consistently across all touchpoints is essential for organizations aiming to build trust, foster customer loyalty, and maintain their brand reputation. This requires a strategic approach encompassing uniform messaging, standardized service protocols, employee training, performance monitoring, and seamless integration across platforms.
Specialty Coating Systems (SCS) Relocates to New Custom-Built Site in Switzerland
06/19/2025 | Specialty Coating Systems (SCS)Specialty Coating Systems (SCS) is pleased to announce the relocation of its Switzerland operations to a new custom-built facility. The approximately 2,200 square-meter coating operation, which is located at Rue du Collège 43, 2300 La Chaux-de-Fonds, is ISO 9001:2015 certified and specifically designed to optimize quality and provide excellent service for customers across the medical device, electronics, aerospace and automotive markets.
Top Investment Certification on 2nd Anniversary Boosts ESCATEC’s European Presence
06/09/2025 | ESCATECTwo significant milestones in recent days by ESCATEC’s business unit in Bulgaria adds much momentum to the EMS provider’s strategy to nearshore cost-effective and high-quality electronics assembly and plastic moulding services for its customers in the European Union.
Kitron Wins Additional €7 Million Contract, Expanding Presence in Industrial Automation
06/06/2025 | KitronKitron has signed a significant manufacturing agreement with a leading customer in the industrial automation sector. The agreement covers electronics manufacturing services for a new generation of high-performance drive modules used in automation and motion control systems.
Cadence Extends Support for Automotive Solutions on Arm Zena Compute Subsystems
06/05/2025 | Cadence Design Systems, Inc.Cadence announced IP, design solution, and expert design services for software and Systems-on-Chip (SoCs) based on Arm® Zena™ Compute Subsystems (CSS), Arm’s first-generation CSS for automotive.