Facing the Future: Time for Real Talk, Early and Often, Between Design and Fabrication
Trouble in Your Tank: Can You Drill the Perfect Hole?
It’s Only Common Sense: Your Guide to Better Time Management
XRF: An Essential Tool to Help PCB Manufacturers Meet IPC Specifications
March 4, 2020 | Matt Kreiner, Hitachi High-TechEstimated reading time: 1 minute
One of the main challenges in PCB manufacturing is to create a stable, long-term coating of the copper surface to perform critical functions throughout the expected lifetime of the part. The surface coating is there to do two things: prevent the copper from oxidizing by coming in contact with the air and form a reliable contact for a soldered joint or wire-bonded connector. Following IPC specifications IPC-4552A, IPC-4553A, IPC-4554, and IPC-4556 will improve reliability and longevity. X-ray fluorescence (XRF) is a proven method—and, for this reason, has been written into these four specifications—to control processes for plating thickness of substrates to address oxidation and solderability.
IPC and ENIG Specification: IPC-4552A
The electroless nickel/immersion gold (ENIG) deposit is one of the most widespread surface finishes used in printed board manufacturing today. IPC released its first specification for ENIG in 2002, followed by revision A in August 2017. ENIG is an excellent surface finish for reliable solder joints and aluminum wire bonds and has a relatively long shelf-life; however, its high performance depends on the quality of nickel and gold layers. The thin outer layer of immersion gold is very stable and prevents oxidation of the underlying nickel for the life of a component.
The 2017 revision helps manufacturers to create a more reproducible and reliable ENIG surface finish and outlines printed board performance requirements, including the J-STD-003 solderability specification. The revision focuses on the thickness of the gold layer; the minimum allowable thickness has been reduced, and a new parameter for the maximum gold thickness was introduced. If the gold thickness is too low, the deposit may not remain intact once in use. This would result in corrosion and cause weak solder joints and board failure.
To read this entire article, which appeared in the February 2020 issue of PCB007 Magazine, click here.
Share on:
Suggested Items
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Hands-On Demos Now Available for Apollo Seiko’s EF and AF Selective Soldering Lines
06/30/2025 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is excited to spotlight its expanded lineup of EF and AF Series Selective Soldering Systems, now available for live demonstrations in its newly dedicated demo room.
Indium Corporation Expert to Present on Automotive and Industrial Solder Bonding Solutions at Global Electronics Association Workshop
06/26/2025 | IndiumIndium Corporation Principal Engineer, Advanced Materials, Andy Mackie, Ph.D., MSc, will deliver a technical presentation on innovative solder bonding solutions for automotive and industrial applications at the Global Electronics A
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
06/26/2025 | Team NCAB -- Column: Fresh PCB ConceptsMicro components have redefined what is possible in PCB design. With package sizes like 01005 and 0201 becoming more common in high-density layouts, designers are now expected to pack more performance into smaller spaces than ever before. While these advancements support miniaturization and functionality, they introduce new assembly challenges, particularly with traditional solder mask and legend application processes.
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.