Happy’s Tech Talk #40: Factors in PTH Reliability—Hole Voids
Facing the Future: Time for Real Talk, Early and Often, Between Design and Fabrication
Trouble in Your Tank: Can You Drill the Perfect Hole?
Advances in Medical Diagnostics Using LoC and LoPCB Technologies
March 31, 2020 | Pete Starkey and Happy Holden, I-Connect007Estimated reading time: 14 minutes
Figure 8: The experimental LoPCB biosensing platform; (a) integrated LoPCB stackup; (b) electrochemical impedance spectroscopy electrode configuration; (c) commercially fabricated PCB biosensing platform; (d) sample delivery microfluidics [4].
Dr. Moschou’s recent work is shown in Figure 9, which is a three-layer multilayer experiment where the construction is:
- Layer 1: Reference layer plated with copper, silver, and silver chloride (Figure 5b&c)
- Layer 2: Sensing electrodes plated with hard gold
- Layer 3: the microfluidic layers for the sample solution
A 3D exploded view, as well as the plated layers, are also shown. The experimental test board proved very successful, so a full LoPCB substrate was designed (Figure 10). This fully integrated PCB cartridge (4.6 cm x 5.7 cm) includes the microfluidic channels for handling the sample, reference electrodes, and working electrodes. It is designed to measure the biomarkers for the test for tuberculosis. In addition to the three-layer construction, the cartridge contained:
- PCI express electrical interfacing
- Six channels (four standard curve points within the clinical range, one negative control, and one sample)
- 10 µL reaction chambers
- Three amperometric sensors per channel
- Full assay implemented on the PCB
Share on:
Suggested Items
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Hands-On Demos Now Available for Apollo Seiko’s EF and AF Selective Soldering Lines
06/30/2025 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is excited to spotlight its expanded lineup of EF and AF Series Selective Soldering Systems, now available for live demonstrations in its newly dedicated demo room.
Indium Corporation Expert to Present on Automotive and Industrial Solder Bonding Solutions at Global Electronics Association Workshop
06/26/2025 | IndiumIndium Corporation Principal Engineer, Advanced Materials, Andy Mackie, Ph.D., MSc, will deliver a technical presentation on innovative solder bonding solutions for automotive and industrial applications at the Global Electronics A
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
06/26/2025 | Team NCAB -- Column: Fresh PCB ConceptsMicro components have redefined what is possible in PCB design. With package sizes like 01005 and 0201 becoming more common in high-density layouts, designers are now expected to pack more performance into smaller spaces than ever before. While these advancements support miniaturization and functionality, they introduce new assembly challenges, particularly with traditional solder mask and legend application processes.
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.