Trouble in Your Tank: Organic Addition Agents in Electrolytic Copper Plating
It’s Only Common Sense: Selling During an Economic Downturn
Marcy’s Musings: Can You Hear the Voices?
HiSilicon, Nowi Introduce Energy Autonomous NB-IoT Platform
July 6, 2020 | Business WireEstimated reading time: 2 minutes
HiSilicon (Shanghai) Ltd and Nowi Energy B.V. showcased the 2nd generation of their Energy Autonomous NB-IoT platform. The device acts as a sensor hub which can transmit via NB-IoT while operating indefinitely through its energy harvesting capabilities. It is based on HiSilicon’s Hi2115 NB-IoT solution and Nowi’s leading NH2 energy harvesting power management IC. The solution removes the need for manual intervention (changing batteries) or cabling to supply power in applications which become zero maintenance.
Building upon the success of the 2019 collaboration, HiSilicon and Nowi have optimised the design to resolve customers’ challenges and satisfy new, stricter market requirements to broaden the variety of applications addressed. The platform combines connectivity and energy harvesting in the smallest size possible and offers an open slot on which various sensors can be placed depending on the application need. As such the platform can act as the backbone of countless connected sensor solutions.
HiSilicon and Nowi are offering the reference design and the corresponding schematics for others to build their solutions upon.
Charles Sturman, Senior Director Product Marketing at HiSilicon, said “Many IoT applications require super long deployment lifecycles and direct power connectivity is often not possible. As such, energy autonomy is becoming an important factor. Our collaboration with Nowi addresses these demands as their next generation NH2 device reaches efficiency and size targets which are changing the rule-book on Energy Harvesting. At HiSilicon, we aim towards a fully connected, intelligent world and such partnerships are crucial to achieve this vision. “
The Energy Autonomous NB-IoT V2 Platform solves multiple challenges:
- Provides a ‘Plug & Forget’ solution capable of multiple transmissions per day indefinitely
- Offers a platform that can be tailored to fit many sensor applications with minimal effort
- Enables applications that were previously unable to use NB-IoT with energy harvesting due to size constraints
- Enables both indoor and outdoor applications
Simon van der Jagt, CEO Nowi, said “From industrial IoT to Smart Home applications we see a strong need for ease-of-use, reduction in device maintenance and small form factor solutions. As such, integrated energy harvesting solutions are playing a key role in the future of connectivity. Nowi’s energy harvesting power management technology uniquely offers these advantages owing to its extremely small PCB assembly footprint, top energy harvesting performance and ease of implementation. We are excited to team up with HiSilicon and help customers on their way by offering the schematics of this new reference design platform. Nowi’s NH2 PMIC is becoming available in Q4 of 2020 for high volume customers.”
The 2nd generation Energy Autonomous NB-IoT board has a significantly decreased PCB size and bill of materials. This powerful new design enables new IoT applications that require continuous operation and have fundamental constraints in form factor.
Share on:
Suggested Items
Material Selection and RF Design
04/21/2025 | Andy Shaughnessy, Design007 MagazineInnovation rarely sleeps in this industry, and the RF laminate segment offers a perfect example. RF materials have continued to evolve, providing PCB designers much more than an either/or choice. I asked materials expert Alun Morgan, technology ambassador for the Ventec International Group, to walk us through the available RF material sets and how smart material selection can ease the burden on RF designers and design engineers.
Real Time with... IPC APEX EXPO 2025: Aster–Enhancing Design for Effective Testing Strategies
04/18/2025 | Real Time with...IPC APEX EXPOWill Webb, technical director at Aster, stresses the importance of testability in design, emphasizing early engagement to identify testing issues. This discussion covers the integration of testing with Industry 4.0, the need for good test coverage, and adherence to industry standards. Innovations like boundary scan testing and new tools for cluster testing are introduced, highlighting advancements in optimizing testing workflows and collaboration with other tools.
Real Time with... IPC APEX EXPO 2025: Emerging Trends in Design and Technology
04/16/2025 | Real Time with...IPC APEX EXPOAndy Shaughnessy speaks with IPC design instructor Kris Moyer to discuss emerging design trends. They cover UHDI technology, 3D printing, and optical data transmission, emphasizing the importance of a skilled workforce. The role of AI in design is highlighted, along with the need for understanding physics and mechanics as designs become more complex. The conversation concludes with a focus on enhancing math skills for better signal integrity.
Electronic System Design Industry Posts $4.9 Billion in Revenue in Q4 2024
04/15/2025 | SEMIElectronic System Design (ESD) industry revenue increased 11% to $4,927.3 million in the fourth quarter of 2024 from the $4440.9 million reported in the fourth quarter of 2023, the ESD Alliance, a SEMI Technology Community, announced in its latest Electronic Design Market Data (EDMD) report.
Connect the Dots: Involving Manufacturers Earlier Prevents Downstream Issues
04/17/2025 | Matt Stevenson -- Column: Connect the DotsIf you have read any of my earlier columns, you know I am passionate about helping designers design for the reality of manufacturing. Designing for manufacturability (DFM) is a team sport. DFM is a design process that looks forward to the manufacturing process and integrates with it so that manufacturing requirements and capabilities can be accurately reflected in the design work.