-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
SMTA Additive TechXchange Keynote: An Outlook on Advanced PCB Fab
October 20, 2020 | Pete Starkey, I-Connect007Estimated reading time: 4 minutes
Organised as a virtual event by Lenora Clark of ESI Automotive and Tara Dunn of Omni PCB, SMTA’s Additive TechXchange addressed additive technology specifically in the context of the electronics industry.
I took the opportunity to attend the keynote presentation, an outlook on advanced printed circuit board fabrication, from Jeff Doubrava, managing partner at Prismark Partners, who has spent most of his career in and around the PCB industry and has observed first-hand the innovations that have taken place.
He opened with, “Technology drives the electronics industry.” Innovation, he said, had driven the electronics industry over its 60-year history, enabling the growth of a $2 trillion business, and much of the industry’s recent growth had been tied to the development of massive consumer-facing applications: personal computers, mobile phones, consumer electronics, and automotive electronics. This growth would not have been possible without innovation across the supply chain, which had been focused on the goals of performance, size, and cost. And whilst the application drivers were currently transitioning from consumer-facing to infrastructure, the same targets for innovation applied.
It was evident that, because of market saturation, personal computers and mobile phones were no longer the value-growth drivers in the electronics industry. Currently, the strongest growth is from servers and storage, communications infrastructure, and automotive, which are becoming the main value-drivers of the semiconductor market.
Technology innovation occurred across the whole electronics supply chain, but the pace and visibility of development varied greatly. Semiconductors were the most consistent drivers; displays and batteries impacted selected devices and tended to be driven by disruptive innovations.
For everything else, including PCBs, innovation was more incremental and driven by developments in other markets and the influence of powerful original equipment manufacturers (OEMs) and integrated device manufacturers (IDMs). But it was clear that silicon drove the growth of the electronics industry.
Although not quite matching the pace of the semiconductor industry, innovation in PCBs was focused on similar goals: speed, size, and cost. In terms of feature size, PCB density had increased by a factor of 10 during the previous 30 years, whereas over the same period, semiconductor density had increased a hundredfold.
Other than considerations of cost, PCB innovation continued to be driven by developments in components and the influence of powerful OEMs and IDMs. Recent innovation had been accelerated by advances in displays, personal computers, and smartphones. He illustrated the trend with a chart showing the evolution of the iPhone, and particularly its increasing functionality. The value of the HDI board market was forecast to increase by nearly 6% between the years 2019 and 2024, with substrate-like PCBs (SLP) for smartphones representing the largest growth area. SLP boards were typically made by the modified semi-additive process (mSAP).
The semi-additive process (SAP) was widely used for manufacturing substrates for component packages such as ball grid arrays (BGA), pin grid arrays (PGA), and land grid arrays (LGA), in build-up constructions which had progressed from 6-4-6 structures with 10–12-micron lines and spaces and 50-micron vias in 2015 to forecast 11-2-11 structures with 5–8-micron lines and spaces and 23–50-micron vias in 2021.
Doubrava listed substrate packages and their constructions. A candidate for next-generation build-up technology was a 7-micron film known as Ajinomoto build-up film (ABF), which offered an alternative for redistribution layers, interposers, and fan-out packages. Two-micron line and space capability was claimed, with 5-micron vias produced by a UV laser.
He also described the Qualconn 5G millimetre-wave antenna, built on a 5-2-5 any-layer high-density interconnect 950 microns thick, of which the top five layers formed the interconnect, and the bottom five formed the antenna. The module contained a millimetre-wave transceiver, four patch-antennae, a power manager, power inductors, and a connector for a flex jumper to the main PCB, all within a 19 mm x 5 mm module.
Looking at mobile phone shipments from 2012 to date, with a forecast to 2024, there was not an enormous variation in overall numbers, but clear trends in network generations showing the progressive disappearance of 2G and 3G, the increasing dominance of 4G, and the recent appearance and growth of 5G, forecast to represent 55% of phones sold in 2014.
The growth rate graph for flexible circuits showed significant fluctuation related to mobile phone demand, complicated by computer, communications, and display applications, and was currently flat due to a stagnant smartphone market. Polyimide film laminate remained predominant, but there was growth in the use of liquid crystal polymer material for high-speed low-loss requirements. In a photograph of a stripped-down iPhone, 15 separate flex circuits were visible.
In his concluding summary, Doubrava commented that although never likely to match the pace and acclaim associated with semiconductors, PCB fabrication remained driven by innovation. Material suppliers, equipment suppliers, and PCB fabricators would continue to be rewarded with share gains and improved margins for their developments, focused on performance, size, and cost—if tied to powerful OEMs/IDMs.
And despite the ongoing rotation toward infrastructure, advanced PCB designs will lead the industry, with improved electricals—low loss driven by 5G, advanced servers, automotive ADAS, and increased density—advanced packaging and high-density portables.
An excellent overview with notable statistics and analysis and some knowledgeable forecasts. Many thanks to Jeff Doubrava for his contribution and to Lenora Clark and Tara Dunn for organising a most interesting event.
Suggested Items
SPEA Expands in Southeast Asia with New Subsidiary in Thailand
05/17/2024 | SPEASPEA, a global leader in automatic test equipment for the manufacturing of semiconductor, microelectronic and electronic devices, today announced the opening of its new subsidiary in Thailand. This expansion marks a significant step forward in SPEA's commitment to serving the growing Southeast Asian microchip and electronics market with leading-edge manufacturing machinery and equipment.
Indium Corporation to Showcase Sustainable Solutions for Power Electronics at PCIM
05/17/2024 | Indium CorporationAs one of the leading materials providers to the power electronics assembly industry, Indium Corporation® will proudly showcase a selection of innovative products at PCIM Europe, June 11-13, in Nuremberg, Germany.
Siemens, Foxconn Team Up to Optimize Forward-thinking Manufacturing
05/16/2024 | FoxconnSiemens AG, a leading technology company, and Hon Hai Technology Group (Foxconn), the world’s largest electronics manufacturer, have signed a memorandum of understanding (MoU) to drive digital transformation and sustainability in smart manufacturing platforms.
IPC Releases May 2024 Global Sentiment of the Electronics Supply Chain Report
05/16/2024 | IPCSentiment among electronics manufacturers fell this month, after hitting a new high in April. Despite the decline, sentiment remains historically high according to IPC’s May Sentiment of the Global Electronics Manufacturing Supply Chain Report.
Sypris Reports Q1 2024 Results; Revenue Up 10%
05/15/2024 | Sypris Solutions Inc.The Company’s first quarter 2024 consolidated revenue increased 10.1% to $35.6 million compared with the prior-year quarter, representing the 11th quarter of double-digit year-over-year growth during the past 12 quarterly periods.