Trouble in Your Tank: Organic Addition Agents in Electrolytic Copper Plating
It’s Only Common Sense: Selling During an Economic Downturn
Marcy’s Musings: Can You Hear the Voices?
Delft Hyperloop Details Eurocircuit Role in PCB Production, Assembly
November 5, 2020 | EurocircuitsEstimated reading time: 1 minute
Every implementation of the Hyperloop system will contain a lot of electronics. Our prototype pod uses 8 electric motors and motor controllers to propel itself. These motors are powered by 2 LiPo battery packs. To connect all of the electrical systems of the vehicle we also need a control PCB including an embedded microcontroller that interfaces with these systems using a CAN interface. Furthermore, this PCB is also used to activate the brakes, readout the position and velocity of the vehicle, send data to an external PC using an Ethernet interface and log on-board data to an SD card. Throughout the year we have ordered a lot of different PCBs that are essential for the functioning of our pod. Eurocircuits facilitated our PCB production and assembly throughout the year.
Using the knowledge of the previous Delft Hyperloop years we could immediately start on our V1, which we decided to assemble ourselves to stay flexible and have even shorter lead times.
This PCB was tested and used long before our pod was produced. By performing integrated tests with our powertrain and propulsion departments, it was possible to find points of improvement early on in the year.
This resulted in PCB V2, which was installed on last year’s pod. With this vehicle, we were able to test our complete electrical design and achieve some rather high speeds at our test track.
After having tested with two prototype PCB versions, we used the Eurocircuits assembly service for V3. This gave us time to continue testing with our older versions and resulted in a highly accurate PCB to be used for our record attempt.
In a year with tight deadlines and many design iterations our collaboration with Eurocircuits was essential to getting a proper functioning electrical system. Because of the short lead times and the variety of different options offered at Eurocircuits, we were able to keep focussing on our designs and always have working PCBs on time for important tests. Especially the Eurocircuits PCB checker has been very useful as it has detected some design errors in our PCB which could be fixed before we ordered the PCB.
Share on:
Suggested Items
Siemens, TSMC Extend Collaboration to Drive Semiconductor Design Innovation
04/25/2025 | SiemensSiemens Digital Industries Software announced that the company has deepened longstanding collaboration with TSMC to drive innovation in semiconductor design and integration, enabling mutual customers to tackle the challenges of next-generation technologies.
Ansys Strengthens Collaboration with TSMC on Advanced Node Processes Certification and 3D-IC Multiphysics Design Solutions
04/24/2025 | PRNewswireThrough continued collaboration with TSMC, Ansys announced enhanced AI-assisted workflows for radio frequency (RF) design migration and photonic integrated circuits (PICs), and new certifications for its semiconductor solutions. Together,
Autodesk Donates $4.3 Million to Cornell University to Prepare students for an AI-powered future
04/24/2025 |Autodesk announced a $4.3 million gift to Cornell University’s College of Engineering and College of Architecture, Art, and Planning (AAP) to help prepare students for the future of work in an increasingly AI-driven world. The investment will fund a new Autodesk Cornell Engineering Design and Make Space in Upson Hall.
Driving Sustainability in PCB Design
04/24/2025 | Marcy LaRont, I-Connect007Filbert (Fil) Arzola is an electrical engineer at Raytheon. He’s smart, entertaining, and passionate about PCB design. As it turns out, he’s also passionate about “Mother Earth,” as he calls her. Born and raised in Southern California, he freely admits that he turns the water off when he brushes his teeth and yells at his brother for throwing batteries in the garbage. But when looking at the issue of sustainability and PCB design, he urges his audiences to ponder what sustainability looks like. Can PCB designers, he asks, make any impact on sustainability at all?
Real Time with... IPC APEX EXPO: Silicon Geometry's Signal Integrity Impact on PCBs
04/24/2025 | Marcy LaRont, I-Connect007At IPC APEX EXPO 2025, Kris Moyer addressed the importance of understanding the impact of silicon geometry reduction on signal integrity and PCB performance. Kris says signal integrity considerations are necessary for so many designs today, regardless of clock frequency. He discusses valuable insights from attendees regarding embedded resistor technology and the effects of radiation on smaller silicon features in aerospace applications.