New Class of Cobalt-Free Cathodes Could Enhance Next-Gen Lithium-Ion Batteries
December 24, 2020 | ORNLEstimated reading time: 2 minutes
Oak Ridge National Laboratory researchers have developed a new family of cathodes with the potential to replace the costly cobalt-based cathodes typically found in today’s lithium-ion batteries that power electric vehicles and consumer electronics.
The new class called NFA, which stands for nickel-, iron- and aluminum-based cathode, is a derivative of lithium nickelate and can be used to make the positive electrode of a lithium-ion battery. These novel cathodes are designed to be fast charging, energy dense, cost effective, and longer lasting.
With the rise in the production of portable electronics and electric vehicles throughout the world, lithium-ion batteries are in high demand. According to Ilias Belharouak, ORNL’s scientist leading the NFA research and development, more than 100 million electric vehicles are anticipated to be on the road by 2030. Cobalt is a metal currently needed for the cathode which makes up the significant portion of a lithium-ion battery’s cost.
Cobalt is rare and largely mined overseas, making it difficult to acquire and produce cathodes. As a result, finding an alternative material to cobalt that can be manufactured cost effectively has become a lithium-ion battery research priority.
ORNL scientists tested the performance of the NFA class of cathodes and determined they are promising substitutes for cobalt-based cathodes, as described in Advanced Materials and the Journal of Power Sources. Researchers used neutron diffraction, Mossbauer spectroscopy and other advanced characterization techniques to investigate NFA’s atomic- and micro-structures as well as electrochemical properties.
“Our investigations into the charging and discharging behavior of NFA showed that these cathodes undergo similar electrochemical reactions as cobalt-based cathodes and deliver high enough specific capacities to meet the battery energy density demands,” said Belharouak.
Although research on the NFA class is in the early stages, Belharouak said that his team’s preliminary results to date indicate that cobalt may not be needed for next-generation lithium-ion batteries.
“We are developing a cathode that has similar or better electrochemical characteristics than cobalt-based cathodes while utilizing lower cost raw materials,” he said.
Belharouak added that not only does NFA perform as well as cobalt-based cathodes, but the process to manufacture the NFA cathodes can be integrated into existing global cathode manufacturing processes.
“Lithium nickelate has long been researched as the material of choice for making cathodes, but it suffers from intrinsic structural and electrochemical instabilities,” he said. “In our research, we replaced some of the nickel with iron and aluminum to enhance the cathode’s stability. Iron and aluminum are cost-effective, sustainable and environmentally friendly materials.”
Future research and development on the NFA class will include testing the materials in large-format cells to validate the lab-scale results and further explore the suitability of these cathodes for use in electric vehicles.
Suggested Items
Northrop Grumman Launches Black Dagger Target to Test New Patriot Missile System Sensor
12/20/2024 | Northrop GrummanNorthrop Grumman Corporation launched a Zombie target vehicle variation, known as “Black Dagger,” from Fort Wingate to White Sands Missile Range, New Mexico, for the U.S. Army Space and Missile Defense Command’s (USASMDC) LTZ-3 test mission. Zombie targets get their name because they bring “new life” to demilitarized solid rocket motors by repurposing them to create threat-representative tactical ballistic missiles.
High-Generation Panel Production Expected to Drive OLED Notebook Penetration Rate Past 5% by 2027
12/20/2024 | TrendForceTrendForce's latest OLED Technology and Market Development Report reveals that the penetration rate of OLED displays in notebooks is set to increase to 3% in 2024, driven by large-scale procurement from Chinese laptop brands. While growth in 2025 is expected to be moderate, the anticipated introduction of OLED displays in Apple’s MacBook lineup will mark a significant turning point.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Dan’s Biz Bookshelf: ‘Costovation: Innovation That Gives Your Customers Exactly What They Want—And Nothing More’
12/25/2024 | Dan Beaulieu -- Column: Dan's Biz Bookshelf"Costovation" by Stephen Wunker and Jennifer Luo Law delivers a refreshing perspective on innovation by focusing on "just enough" innovation—creating products and services that serve the customer's needs without unnecessary features or costs. This book is a revelation for business leaders seeking effective strategies when flashy, expensive innovations often dominate the market. The authors share how companies can thrive by delivering targeted, cost-effective innovation by offering customers precisely what they need.
Are Our Stackup Rules No Longer Valid?
12/19/2024 | Cherie Litson, EPTAC MIT CID/CID+Are the stackup rules we used to follow no longer valid? It depends on what you’re designing. Electrical rules change depending on your circuit. Fabrication rules change depending on which fabricator you’re working with. Today, we just have more options, and sometimes, cost is a bigger rule than anything else. If you search online for information about layer stackups, trace widths, and hole sizes in PCBs, you’ll find a variety of resources.