The Marketing Minute: If Your Marketing Budget Gets Cut in Half, Then What?
Punching Out: How Are the Big Boys in Electronics Doing?
It’s Only Common Sense: Complexity Is the Enemy of Profit
Aismalibar, American Standard Circuits Confirm IST Thermal Testing of HTC 3.2w High Tg Multilayer Thermal Conductive Material
January 11, 2021 | AismalibarEstimated reading time: 3 minutes
Aismalibar and American Standard Circuits confirm successful IST thermal testing of HTC 3.2w High Tg Multilayer Thermal Conductive Material.
In order to confirm that the Aismalibar High Tg (180 °C), thermal conductive (3.2 w/mc), multilayer material system would pass rigorous automotive thermal cycling testing, the proven IST thermal testing methodology was chosen. American Standard Circuits manufactured the thermal conductive multilayer test panels. PWB Interconnect Solutions Inc. performed the thermal cycling testing.
“We believe there is no better material on the market today than Aismalibar’s HTC 3.2w High Tg Multilayer Thermal conductive material. To demonstrate that, we passed it through very rigorous thermal cycling testing. The best part? Our trusted customer partners American Standard Circuits and PWB Interconnect Solutions Inc. were involved in the process,” said Aismalibar North America President Jeff Brandman when making the announcement.
The IST system automatically sequences a constant DC current through the designed PWB interconnect test coupon, providing the thermal cycling of the samples. The rise in temperature of the circuits is from 25°C to 150°C for reliability testing or an upper temperature of 230°C to 260°C for simulating assembly stress. Once the specified temperature has been achieved, the system turns off the current and cooling begins. After a 3-minute heating cycle, the coupons are forced air cooled for 2 minutes, which represents one cycle. The specified upper temperature for reliability testing is just below the glass transition temperature of the base material.
During each thermal excursion, the system continuously monitors the minute resistance changes in the PTH, blind, buried and micro-via or inner layer to barrel (post) interconnects. Due to the temperature of the interconnect cycles, the resistance values of the interconnect, traces, pads, and hole barrels will also change. The IST system is designed to measure resistance changes to signify when the PCB reaches the point of interconnect degradation or failure. Typical multilayers will survive between 200 to 500 thermal cycles. The Aismalibar High Tg, thermal conductive, multilayer material system survived the required 1000 cycles with no noticeable degradation. The first test coupons were stressed with 3 pre-condition cycles at 245°C and 300°C thermal cycles at 150°C. The 350-cycle testing passed with no degradation. To stress the coupons to the maximum, trying to force failures, a second more severe test called for 9 times preconditioning at 300°C. Capacitance readings were taken after 3, 6 and 9 pre-conditioning cycles to check for delamination. The coupons easily passed 1000 cycles, showing the superiority of the Aismalibar high HT 3.2 w/mc multilayer lamination system.
About Aismalibar (Copper Clad Laminates and Metal Clad Laminates for PCB)
Aismalibar has over sixty years of experience manufacturing high end copper and metal clad laminates for the printed circuit board industry. During the last two decades, Aismalibar has been focused on offering the best solutions to reduce the operational temperature of printed circuit boards.
For more information, visit www.aismalibar.com.
About American Standard Circuits
American Standard Circuits (ASC) prides itself on being a total solutions provider. They manufacture quality rigid, metal-backed, RF/microwave, flex, and rigid-flex PCBs for the medical, automotive, industrial, defense, and aerospace markets in volumes, from test and prototypes, to large production orders. ASC has expertise to provide a wide variety of technologies in a time-critical environment.
Their qualifications include AS9100 Rev D, ISO 9001:2015, MIL-PRF 31032, MIL-PRF-55110, MIL-PRF-50884 certification and ITAR registration. In addition to manufacturing in the USA, ASC can transition and manage your PCB requirements to lower cost regions via its qualified supply chain of offshore partners. ASC also holds many key patents for metal bonding processes. For more information about American Standard Circuits' services or to ask one of their technology experts a question, visit www.asc-i.com.
Visit I-007eBooks to download your copies of American Standard Circuits’ micro eBooks today:
The Printed Circuit Designer’s Guide to… Fundamentals of RF/ Microwave PCBs
The Printed Circuit Designer's Guide to... Flex and Rigid-Flex Fundamentals
The Printed Circuit Designer’s Guide to...Thermal Management: A Fabricator's Perspective
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
I-Connect007 Releases The Printed Circuit Designer’s Guide to… Direct Metallization: A Guide to Complex PCB Fabrication
05/13/2026 | I-Connect007As PCB complexity continues to accelerate, fabricators and OEMs are reevaluating long-standing manufacturing processes to meet the demands of AI, HDI, advanced packaging, and next-generation electronics. To address these evolving challenges, I-Connect007 is proud to announce the release of The Printed Circuit Designer’s Guide to… Direct Metallization: A Guide to Complex PCB Fabrication, authored by MacDermid Alpha Solution’s Carmichael Gugliotti.
Driving Innovation: Selecting the Right Laser Source
04/28/2026 | Simon Khesin -- Column: Driving InnovationWhen I first joined Schmoll Maschinen, I brought experience from almost every PCB process, except for laser. As I immersed myself in laser processing, I realized why it can seem so daunting to a newcomer. The complexity arises from three intersecting factors: A vast variety of laser sources: CO2, UV-nano, green-pico, UV-pico, IR-pico, and others; a diverse range of applications: Drilling, cutting, ablation, and more; and an extensive list of materials: These have vastly different absorption rates. Choosing the right machine or laser source is rarely trivial. Even for experienced engineers, answering "Which source is best?" requires examining the business's specific goals.
Institute of Circuit Technology Spring Seminar 2026: A Bright Future in Europe
04/23/2026 | Pete Starkey, I-Connect007Through the leafy lanes and spring flowers of Warwickshire and back to Meridan, the traditional centre of England, and now officially part of the Metropolitan Borough of Solihull in the county of the West Midlands, I attended the Annual General Meeting and Spring Seminar of the Institute of Circuit Technology (ICT) on April 14. Out of the AGM came notable changes in leadership at the top of the Institute: the retirement of Mat Beadel as chair and Emma Hudson as technical director. Effective May 1, Steve Driver is the new chair, and Alun Morgan is the new technical director.
ACCM Unveils Negative and Near-zero CTE Materials for Large-Format AI Chips
04/21/2026 | Advanced Chip and Circuit MaterialsAdvanced Chip and Circuit Materials, Inc. (ACCM) has launched two new materials: Celeritas HM50, with a negative coefficient of thermal expansion (CTE) of -8 ppm/°C to offset the positive CTE and expansion of copper with temperature on circuit boards, and Celeritas HM001, with near-zero CTE and the low-loss performance needed for high-speed signal layers to 224 Gb/s and faster in artificial intelligence (AI) circuits.
Fresh PCB Concepts: Designing PCBs for Harsh Environments—Reliability Is Engineered Upstream
04/23/2026 | Team NCAB -- Column: Fresh PCB ConceptsWhen engineers hear the phrase “harsh environment,” they usually think of the extreme temperature swings, vibration and shock, pressure changes, or radiation in aerospace. However, aerospace is not the only harsh environment where electronic assemblies must survive. Automotive power electronics, downhole oil and gas tools, marine controls, rail systems, defense platforms, and industrial automation equipment all expose PCBs to environments that are equally unforgiving. The stress mechanisms may differ, but the physics does not.