Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Punching Out: Should You Sell Your Company to a Private Equity Firm?
Arlon EMD Introduces 84HP Prepreg to Compliment the 85HP Laminate System
March 29, 2021 | Arlon EMDEstimated reading time: 1 minute
Arlon Electronic Materials introduces 84HP high-performance 250?C Tg temperature polyimide resin prepreg. Arlon developed 84HP as a prepreg bonding companion to Arlon’s 85HP filled pure polyimide resin laminate system. 84HP is designed for use in filling etched areas in polyimide multilayers that contain thick copper metal cores.
A proprietary filler is dispersed within the 84HP and 85HP polyimide resin which serves to reduce shrinkage and inhibit crack formation during lamination and through-hole mechanical drilling processes. This unique formulation has proven benefits such as improved drilling over conventional polyimide resin systems, predictable dimensional stability, and reduction in gouging and glass wicking during hole formation.
Additional benefits include X-Y expansion rates very close to copper (16-18 ppm/?C), and very low Z-axis of <1%, the lowest Z-axis expansion of any polyimide in the industry. Arlon’s 84HP is manufactured on 50” wide 106 E-glass matching the grain direction of 85HP. 84HP meets the requirements of IPC-4101/40 and IPC-4101/41.
Dave Nelson, director of business development for Arlon, stated: “The performance requirements of IPC-6012DS, an addendum to IPC-6012D, specify that printed circuits boards manufactured to this added level of reliability must survive vibration, ground testing and thermal cycling environments of space and military avionics. These requirements can be achieved by using 84HP as the bonding layers for the 85HP etched laminates. Additional benefits using this combination are 2X thermal conductivity versus conventional polyimide systems for improved component longevity and lower component junction temperatures.”
Applications for Arlon’s 85HP and 84HP include high layer count MLB’s incorporating several sequential lamination operations, thick copper MLB’s, high power copper internal planes, deep space electronics, down-hole oil and gas drill equipment, engine control modules, rocket motor controls, and avionic electronics.
About Arlon: Arlon EMD is a US manufacturer of specialty materials. Arlon has supplied materials for the North American, UK, European, Israeli and Asian markets for more than 35 years from their manufacturing location in Rancho Cucamonga, California.
For additional information, please visit our website at www.arlonemd.com.
Share on:
Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.