Researchers Harvest Energy from Radio Waves to Power Wearable Devices
April 5, 2021 | Pennsylvania State UniversityEstimated reading time: 3 minutes
From microwave ovens to Wi-Fi connections, the radio waves that permeate the environment are not just signals of energy consumed but are also sources of energy themselves. An international team of researchers, led by Huanyu “Larry” Cheng, Dorothy Quiggle Career Development Professor in the Penn State Department of Engineering Science and Mechanics, has developed a way to harvest energy from radio waves to power wearable devices.
According to Cheng, current energy sources for wearable health-monitoring devices have their place in powering sensor devices, but each has its setbacks. Solar power, for example, can only harvest energy when exposed to the sun. A self-powered triboelectric device can only harvest energy when the body is in motion.
“We don’t want to replace any of these current power sources,” Cheng said. “We are trying to provide additional, consistent energy.”
The researchers developed a stretchable wideband dipole antenna system capable of wirelessly transmitting data that is collected from health-monitoring sensors. The system consists of two stretchable metal antennas integrated onto conductive graphene material with a metal coating. The wideband design of the system allows it to retain its frequency functions even when stretched, bent and twisted. This system is then connected to a stretchable rectifying circuit, creating a rectified antenna, or "rectenna,” capable of converting energy from electromagnetic waves into electricity. This electricity that can be used to power wireless devices or to charge energy storage devices, such as batteries and supercapacitors.
This rectenna can convert radio, or electromagnetic, waves from the ambient environment into energy to power the sensing modules on the device, which track temperature, hydration and pulse oxygen level. Compared to other sources, less energy is produced, but the system can generate power continuously — a significant advantage, according to Cheng.
“We are utilizing the energy that already surrounds us — radio waves are everywhere, all the time,” Cheng said. “If we don’t use this energy found in the ambient environment, it is simply wasted. We can harvest this energy and rectify it into power.”
Cheng said that this technology is a building block for him and his team. Combining it with their novel wireless transmissible data device will provide a critical component that will work with the team’s existing sensor modules.
“Our next steps will be exploring miniaturized versions of these circuits and working on developing the stretchability of the rectifier,” Cheng said. “This is a platform where we can easily combine and apply this technology with other modules that we have created in the past. It is easily extended or adapted for other applications, and we plan to explore those opportunities.”
This paper is co-authored by Jia Zhu, who earned a doctoral degree in engineering science and mechanics from Penn State in 2020; Zhihui Hu, former visiting professor in engineering science and mechanics at Penn State and current associate professor at Wuhan University of Technology in China; Chaoyun Song, assistant professor in the School of Engineering and Physical Sciences at Heriot-Watt University in Scotland; Ning Yi, who earned a doctoral degree in engineering science and mechanics from Penn State in 2020; Zhaozheng Yu, who earned a master’s degree in engineering science and mechanics from Penn State in 2019; Zhendong Liu, former visiting graduate student in engineering science and mechanics at Penn State; Shangbin Liu, graduate student in engineering science and mechanics at Penn State; Mengjun Wang, associate professor in the School of Electronics and Information?Engineering at Hebei University of Technology in China; Michael Gregory Dexheimer, who earned a master’s degree in engineering science and mechanics from Penn State in 2020; and Jian Yang, professor of biomedical engineering at Penn State.
Support for this work was provided by the National Science Foundation; the National Heart, Lung, and Blood Institute of the National Institutes of Health; and Penn State.
Suggested Items
RTX Introduces the Collins Airport Surface Awareness System
05/10/2024 | RTXCollins Aerospace, an RTX business, introduces Collins’ Airport Surface Awareness System for real-time tracking, monitoring, and recording of both aircraft and ground support equipment at airports.
Airbus Finalises Acquisition of Aerovel and Its UAS Flexrotor
05/10/2024 | AirbusAirbus has finalised the acquisition of U.S.-based Aerovel and its unmanned aerial system (UAS), Flexrotor, in a move to strengthen its portfolio of tactical unmanned solutions.
Lockheed Martin Receives $451M to Upgrade Additional US Army and International M270 Launchers
05/10/2024 | Lockheed MartinThe U.S. Army awarded Lockheed Martin a $451 million contract to recapitalize additional M270 systems expanding its domestic fleet of launchers and providing upgrades for global partners.
BAE Systems and Eaton Expand Collaboration to Deliver Electric Drive Solutions for Heavy-Duty Trucks
05/08/2024 | PRNewswireBAE Systems, a leader in electric propulsion, and Eaton, a global power management company, are expanding their collaboration to include electric vehicle (EV) solutions for heavy-duty trucks.
OSI Systems Receives $6 Million Order for Electronic Assemblies
05/08/2024 | BUSINESS WIREOSI Systems, Inc. announced that its Optoelectronics and Manufacturing division has received an order for approximately $6 million to provide electronic assemblies to an advanced engineered solutions OEM.