High Density Packaging User Group Announces Uyemura Membership
October 18, 2021 | HDP User GroupEstimated reading time: 1 minute
High Density Packaging (HDP) User Group is pleased to announce that Uyemura International (Uyemura) has become a member.
“As our focus expands from our traditional stronghold in PCB processes into complex assembly processes – especially the high frequency and medical device arenas - we look forward to working with HDP member companies,” said Rich DePoto, Uyemura Business Development Manager.
“I am pleased to welcome Uyemura to HDP, joining the outstanding companies working on HDP User Group projects. Their expertise in surface treatment processes for electronics will contribute significantly to several of our projects, especially those focused on high frequency applications and emerging technologies,” said Larry Marcanti, Executive Director of HDP User Group.
About Uyemura
Uyemura is a science company founded in 1848, with core competencies in the development, testing, and manufacture of process chemistries for the PCB, semiconductor, sensor, photonics and medical device industries.
Uyemura has often been characterized as a disruptor – (long before that became a popular term!) Many Uyemura products have re-invented the solutions of the past, often dramatically, rendering legacy products obsolete, and establishing new benchmarks for performance, longevity, and cost management.
Uyemura was the first company in the industry to establish a research laboratory (today, there are 5 worldwide) as an institution for interdisciplinary surface treatment research. Our global R&D activities have generously rewarded the Uyemura brand with the confidence of leading OEMs in virtually every sector.
More information can be found at: https://www.uyemura.com/index.html
About HDP
HDP User Group, a global research and development organization based in Round Rock, Texas, is dedicated to reducing the costs and risks for the Electronics Manufacturing industry when using advanced electronic packaging and assembly. This international industry-led group organizes and conducts R&D programs to address the technical issues facing the industry, including design, printed circuit board manufacturing, electronics assembly, and environmental compliance. HDP User Group maintains additional offices in Singapore and Tokyo.
For more information, visit HDP User Group on the Internet at www.hdpug.org.
Suggested Items
Advanced Packaging and Stackup Design: December 2024—Design007 Magazine
12/09/2024 | I-Connect007 Editorial TeamIn this month's issue,, we asked our expert contributors to discuss the impact of advanced packaging on stackup design—from SI and DFM challenges through the variety of material tradeoffs that designers must contend with in the arena of HDI and UHDI. And with a little research, planning, and collaboration with the fabricator, any seasoned PCB designer can utilize advanced packaging.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/06/2024 | Marcy LaRont, I-Connect007This week’s must-reads include a discussion on innovation and embedded components within the layers of a PCB with Accurate Circuit Engineering. We revisit the real cost to manufacture in a case study on how a seemingly small design error can have a dramatic effect on your end customer’s costs. Dan Beaulieu provides this month’s book review highlighting the criticality of fostering creativity in the workplace. Bert Horner of The Test Connection discusses his decision to launch a new, complimentary business venture, The Training Connection; and Ramon Roche of NCAB talks about electric vehicle charging.
Mycronic Introduces New Machine Models to Its High-Performance Pick-And-Place Platform MYPRO A40
12/06/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, is introducing two new machine models MYPro A40SX and A40LX to its next-generation MYPro A40 pick-and-place platform, equipped with the all-new MX7 high-speed mounthead technology.
Growth Unfolds: The First of STARTEAM’s Trio of Factories Set to Expand
12/05/2024 | STARTEAM GLOBALSTARTEAM is thrilled to share news of our upcoming 3-step expansion at JST, with each step adding 50,000m² per month which began on May 27, 2024. This carefully planned extension is designed to significantly increase our production capacity and expand our talented team. Currently, our production space covers 30,000m². Through this expansion, we are setting our sights on incrementally increasing our capacity from 70,000m²/month to a remarkable 130,000m²/month.
American Standard Circuits Earns IATF 16949 Automotive Re-Certification
12/05/2024 | American Standard CircuitsAnaya Vardya, President and CEO of American Standard Circuits and ASC Sunstone has announced that his company’s West Chicago Division has passed their recent IATF 16949 Automotive re-certification.