Defense Speak Interpreted: If CHIPS Cuts Back, What Happens to Electronics Packaging Funds?
American Made Advocacy: Where’s the Budget for a Modern Military Run on Microelectronics?
Beyond the Board: Orbital High Ground—Why Space Superiority Is Slipping Away
Hubble’s Advanced Camera for Surveys Instrument Resumes Science, Investigation Continues
November 9, 2021 | NASAEstimated reading time: 2 minutes
NASA is continuing work to resolve an issue that has suspended science operations on the Hubble Space Telescope. The science instruments entered a safe mode configuration on Oct. 25 after detecting a loss of specific data synchronization messages.
The Hubble team is focusing its efforts to isolate the problem on hardware that commands the instruments and is part of the Science Instrument Command and Data Handling Unit. Specifically, the team is analyzing the circuitry of the Control Unit, which generates synchronization messages and passes them onto the instruments.
While analyzing the Control Unit, the team is working to identify potential workarounds for the issue. These include possible changes to instrument flight software that could check for these lost messages and compensate for them without putting the instruments into safe mode. These workarounds would first be verified using ground simulators to ensure they work as planned.
Over the weekend of Oct. 30, the team prepared to turn on parts of the Near Infrared Camera and Multi Object Spectrometer (NICMOS) instrument to collect data on this issue, allowing the team to determine how frequently this problem occurs. Installed in 1997, NICMOS has been inactive since 2010, when the Wide Field Camera 3 became operational. NICMOS allowed the team to use an instrument to collect information on these lost messages while keeping the active instruments off as a safety precaution. Since NICMOS was recovered on Nov. 1, no additional synchronization messages have been lost.
The team is now taking steps to recover Hubble’s Advanced Camera for Surveys (ACS) instrument from safe mode and start collecting science with that instrument at the beginning of next week. The team will make the decision on Sunday after analyzing the latest data. If a lost message is seen before then, the decision to activate ACS will also be revisited. The team is proceeding cautiously to ensure the safety of the instruments and avoid additional stresses on the hardware. Therefore, only ACS will be used in this capacity next week. ACS was selected as the first instrument to recover as it faces the fewest complications should a lost message occur.
Over the next week, the team will continue analyzing the Control Unit design diagrams and data associated with the lost messages to determine what may have caused this problem. They will also be looking into potential instrument software changes that could help address it. Once the team better understands the frequency of the problem and has determined the time needed to implement possible software changes, they will discuss a plan for returning the other instruments to science operations.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Honeywell-Led Consortium Receives UK Government Funding to Revolutionize Aerospace Manufacturing
09/02/2025 | HoneywellA consortium led by Honeywell has received UK Government funding for a project that aims to revolutionize how critical aerospace technologies are manufactured in the UK through the use of AI and additive manufacturing.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
08/29/2025 | Nolan Johnson, I-Connect007This week, we bring you Global Electronics Association’s Chris Mitchell’s government relations column on—you guessed it—trade deals. TTM is balancing its facilities between East and West. The Global Electronics Association released July numbers for North American PCB shipments, and the news is good. Meanwhile, the corresponding report for EMS might seem like bad news, but that’s misleading. Be sure to look deeper for the rest of the story. Finally, for a bit space-science palate cleansing, I’m sharing news of the latest launch of NASA’s X-37B.
Boeing-built X-37B Spaceplane Launches, Beginning Eighth Mission
08/26/2025 | BoeingThe Boeing-built X 37B Orbital Test Vehicle launched its eighth mission, lifting off aboard a SpaceX Falcon 9 from Kennedy Space Center, Florida. The vehicle is healthy on orbit and proceeding with standard checkout.
TI Semiconductors Enable Advanced Earth-observation Capabilities of ISRO’s First-of-its-kind NISAR Mission
08/25/2025 | Texas InstrumentsTexas Instruments (TI) semiconductors are enabling the radar imaging and scientific exploration payloads for the NASA-Indian Space Research Organization (ISRO) synthetic aperture radar (NISAR) satellite, which was recently launched into orbit.
Rocket Lab Announces Expanded U.S. Investments for National Security Programs and Semiconductor Manufacturing
08/25/2025 | BUSINESS WIRERocket Lab Corporation, a global leader in launch services and space systems, announced it is boosting its U.S. investments to expand semiconductor manufacturing capacity and provide supply chain security for space-grade solar cells and electro-optical sensors for national security space missions.