-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
New Methods for Quantifying PCB Design Weaknesses and Manufacturing Challenges
November 18, 2021 | Nolan Johnson, I-Connect007Estimated reading time: 3 minutes
Nolan Johnson recently spoke with Summit Interconnect’s Gerry Partida about disruptive new methods for analyzing and quantifying potential manufacturing challenges in designs while still in the design phase.
Nolan Johnson: Gerry, what’s the background for the new methods we’re about to discuss?
Gerry Partida: The industry is at a new point in evolving how we look at building boards. Our industry has historically built boards and then tried to find a test for them. Then, when they found a test for it, they figured out that it needed to be analyzed before they built the board. We did this with electrical test. We built boards and down the road, as people started asking, “Why am I buying bad boards? We should electrically test them,” electrical test was introduced, reluctantly, into the test part of manufacturing printed circuit boards by suppliers or fabricators. Then they embraced it. But when we started testing boards, we did comparison tests. We would build a bunch of boards, put the first one on a tester, tell it to self-learn, and compare all the boards to the first board. If they all matched, they all shipped as matched boards, but if they had the same defect, they all shipped with the same defect. This did happen.
It wasn’t for another 10 or 15 years that we took extracted netlist from the CAD software and compared it to the Gerber data that would be used to fabricate the board, to find out whether everything was corrected before we started manufacturing. We would find that there was a problem, and we would fix it or get new data. Then when we knew we had a match, we started to manufacture the boards and downloaded the program to the tester. But this was an evolution of about 15 to 25 years. It depends on what point of view you take from it.
We’ve done the same thing with microvias. We’ve been building microvias. There are datasheets that talk about the modulus and the CTE expansion after reflow, before Tg, and after Tg, but no one really would do any math or science behind it. The PCB fabricator would just build the boards and ship them. Sometimes there are assembly problems, and the industry says, “There’s something going on with microvias. Three-stack and four-stack are not as safe as a single microvia and staggering them.” Everybody is trying to find out how strong or how weak they are. Most people were finding out at assembly because the standard IPC-6012 performance specs in the evaluation couldn’t identify a weak microvia very well. So, we came up with the OM tester, which is using the IPC-TM 650 2.6.27 test method, which actually takes a coupon with the same structures that are in the board and simulates reflow on the coupon before we ship the boards.
If that structure, which is in the board that we’re trying to ship, can survive reflow in a tester, then we know that the boards are more than likely going to pass and survive reflow and assembly. This works great. It will tell fabricators that if we process everything right, the board is going to be reliable through reflow. However, after a couple years of having the tester, we discovered we did everything right, but occasionally it wasn’t working. They were failing 6X reflow. Utilizing our extensive experience in microvia fabrication, our portfolio of reliability testing data, materials expertise and software tools, we can simulate the stack-up; you can actually input the microvia structure and the data output will tell you if it can survive six reflows or not.
To read this entire conversation, which appeared in the November 2021 issue of PCB007 Magazine, click here.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/17/2024 | Andy Shaughnessy, Design007 MagazineThis week, trade shows are at the top of our feed, with our coverage of the Del Mar Electronics and Manufacturing Show and IPC APEX EXPO. These two longtime events are almost polar opposites in size and scope, but Del Mar seems to be expanding from its roots as a “neighborhood gathering” with its move into the Del Mar Fairgrounds. The Del Mar show always has a good “buzz factor,” which is something you can’t buy.
IPC APEX EXPO: Some Thoughts About Growth
05/16/2024 | Dan Feinberg, I-Connect007After two and a half days of wandering the aisles at IPC APEX EXPO 2024, for the first time, I almost felt like I was exploring CES. There were so many booths and exhibits that I could describe, but I’d like to focus on the growth and huge value of this event, which has expanded well beyond just the growing and impressive exhibit show floor.
IPC Raymond E. Pritchard Hall of Fame Award: Pierre-Jean Albrieux
05/10/2024 | Marcy LaRont, PCB007 MagazineCongratulations to Pierre-Jean Albrieux, who received the 2024 IPC Raymond E. Pritchard Hall of Fame Award. The award is given to individuals in recognition of the highest level of achievement, extraordinary contributions, and distinguished service to IPC and toward the advancement of the industry, including helping to create a spirit of mutual esteem, respect, and recognition among members consistent with the goals and mission of IPC.
IPC Focuses on Education and Onboarding
05/09/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with Carlos Plaza, senior director of education for IPC, about expanding educational efforts in the PCB design, fabrication, and assembly segments. As Carlos explains, PCB design is a hot topic, but onboarding may be the hottest one of all.
Real Time with… IPC APEX EXPO 2024: Industry Growth, Challenges, and Technological Advancements
05/09/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Shawn DuBravac, IPC chief economist, dive into key industry topics such as growth, challenges, and technological advancements. They discuss shifts in the global competitive landscape, downstream demand, customization, and how AI is enhancing human skills. The industry outlook appears promising for both the short and long term.