The Right Approach: Get Ready for ISO 9001 Version 6
Dan’s Biz Bookshelf: ‘Still Broke: Walmart’s Remarkable Transformation'
Driving Innovation: Depth Routing Processes—Achieving Unparalleled Precision in Complex PCBs
Calumet is Bullish on Additive and Semi-Additive
March 15, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
Calumet Electronics has been a domestic pioneer with additive and semi-additive electronics manufacturing processes. We recently asked Calumet’s Todd Brassard and Meredith LaBeau to discuss the state of this technology, which traditional processes that they might replace, and some of the challenges facing OEMs or PCB shops that are considering these options.
Barry Matties: We’re seeing more additive and semi-additive. Let’s start with what these technologies represent to Calumet.
Todd Brassard: I’m sure some of your readers will go a little crazy at our use of the word “additive.” In my mind, pure “additive” manufacturing is 3D-printed or deposition-based processes while “semi-additive,” in the context of circuit board substrates, involves a seed layer of copper (A-SAP™) or a very thin layer of copper foil (mSAP) with plated copper traces and features.
We understand the distinctions between terms additive and semi-additive; we do not use “additive” to necessarily describe a process, but rather as a proper noun to name the thing and contrast it against “subtractive” processes. For example, when working with Averatek’s A-SAP™ technology, the seed layer is so thin that it is removed with a simple micro-etch. To me, the process is so close to being purely additive, I name it an additive process.
Matties: Is it going to be a mandatory offering for most fabricators in the coming years? Or is this something that will still be limited in scope?
Meredith LaBeau: What is driving the need for additive manufacturing—and I use this term “additive” as Todd just described—is design size and complexity. Next generation electronics will be much smaller. This is easy to see just following the mobile device industry. An electronic interconnect manufacturer in the U.S. can only go so small with traditional subtractive manufacturing processes.
Another piece of this push toward additive technology is environmental. There will be many more conversations about the environmental impact of manufacturing processes, and these considerations will factor more heavily into contract awards. With traditional subtractive processes you’re removing copper, but with additive processes you’re mostly adding copper. I believe there's going to be a shift in design to reduce waste streams regardless of technology, as part of the wider ESG movement.
Todd Brassard: Yes, ESG: environmental and social governance.
Matties: Is that becoming more prevalent?
LaBeau: We are just starting to see environmental considerations seep into conversations and design considerations at our level.
Todd Brassard: We are seeing more environmental considerations flowing down from the DoD. The DoD wants to see transition to greener solutions. Calumet is learning the ropes of federal funding and we believe environmental considerations must be included in any submitted proposal. We’ve been seeing these types of requirements added to RFPs in the last few years. Personally, I believe this is a good thing. We should be paying attention to what we are doing to the planet; this is just common sense.
LaBeau: The additive and semi-additive movements are not just about miniaturization, but also system performance and integrity. Additive and semi-additive technologies provide for better copper trace and feature formation which improves signal integrity and shortens transmission lines, allowing faster bit rates and higher frequencies. For example, radar and communications systems achieve higher performance when trace walls are square and smooth. Combine the potential for feature formation with advanced materials and chemical processes and a wide array of possibilities emerge. As an example, Calumet can plate copper on transparent substrates; just imagine the applications, for example, in the augmented reality space.
To read this entire conversation, which appeared in the February 2022 issue of PCB007 Magazine, click here.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Closing the Loop on PCB Etching Waste
09/09/2025 | Shawn Stone, IECAs the PCB industry continues its push toward greener, more cost-efficient operations, Sigma Engineering’s Mecer System offers a comprehensive solution to two of the industry’s most persistent pain points: etchant consumption and rinse water waste. Designed as a modular, fully automated platform, the Mecer System regenerates spent copper etchants—both alkaline and acidic—and simultaneously recycles rinse water, transforming a traditionally linear chemical process into a closed-loop system.
Driving Innovation: Depth Routing Processes—Achieving Unparalleled Precision in Complex PCBs
09/08/2025 | Kurt Palmer -- Column: Driving InnovationIn PCB manufacturing, the demand for increasingly complex and miniaturized designs continually pushes the boundaries of traditional fabrication methods, including depth routing. Success in these applications demands not only on robust machinery but also sophisticated control functions. PCB manufacturers rely on advanced machine features and process methodologies to meet their precise depth routing goals. Here, I’ll explore some crucial functions that empower manufacturers to master complex depth routing challenges.
Trouble in Your Tank: Minimizing Small-via Defects for High-reliability PCBs
08/27/2025 | Michael Carano -- Column: Trouble in Your TankTo quote the comedian Stephen Wright, “If at first you don’t succeed, then skydiving is not for you.” That can be the battle cry when you find that only small-diameter vias are exhibiting voids. Why are small holes more prone to voids than larger vias when processed through electroless copper? There are several reasons.
The Government Circuit: Navigating New Trade Headwinds and New Partnerships
08/25/2025 | Chris Mitchell -- Column: The Government CircuitAs global trade winds continue to howl, the electronics manufacturing industry finds itself at a critical juncture. After months of warnings, the U.S. Government has implemented a broad array of tariff increases, with fresh duties hitting copper-based products, semiconductors, and imports from many nations. On the positive side, tentative trade agreements with Europe, China, Japan, and other nations are providing at least some clarity and counterbalance.
How Good Design Enables Sustainable PCBs
08/21/2025 | Gerry Partida, Summit InterconnectSustainability has become a key focus for PCB companies seeking to reduce waste, conserve energy, and optimize resources. While many discussions on sustainability center around materials or energy-efficient processes, PCB design is an often overlooked factor that lies at the heart of manufacturing. Good design practices, especially those based on established IPC standards, play a central role in enabling sustainable PCB production. By ensuring designs are manufacturable and reliable, engineers can significantly reduce the environmental impact of their products.