Keysight Enables SK hynix to Speed Semiconductor Memory Technology Development
April 15, 2022 | Keysight Technologies, Inc.Estimated reading time: 2 minutes
Keysight Technologies, Inc., a leading technology company that delivers advanced design and validation solutions to help accelerate innovation to connect and secure the world, announced that SK hynix has selected Keysight's integrated peripheral component interconnect express (PCIe) 5.0 test platforms to speed the development of memory semiconductors used to design advanced products capable of supporting high data speeds and managing massive amounts of data.
A leading memory chip maker, SK hynix develops memory semiconductor solutions with Compute Express Link (CXL) technology to support performance and capacity requirements of next generation mobile phones, computers, data servers and on-road vehicles. Keysight's integrated solutions for physical layer simulation, characterization and validation of PCIe 5.0 devices enable SK hynix to speed test and development of next generation dynamic random-access memory (DRAM) and PCIe devices with CXL high-speed memory interconnect technology.
"Keysight is pleased to deliver SK hynix PCIe 5.0 test solutions that validate the performance of high-capacity and power-efficient memory storage devices used in edge and cloud computing, data centers, 5G devices and radio access network equipment," said Joachim Peerlings, vice president of network and data center solutions at Keysight. "Keysight's PCIe test platforms enable SK hynix to validate the performance of bandwidth memory expansion modules deployed in many fourth industrial revolution applications."
Keysight is driving consistency in test results through its contributions in PCI SIG, a consortium responsible for specifying PCI standards. Consistency in test standards enables vendors to confidently launch new PCIe 5.0 technology designs that interoperate as expected with other vendors' products.
SK hynix Inc., headquartered in Korea, is a top-tier semiconductor supplier offering dynamic random access memory chips (DRAM), flash memory chips (NAND Flash) and CMOS image sensors (CIS) for a wide range of distinguished customers globally. Hyung-Soo Kim, Head of DRAM AE at SK hynix, stated "SK hynix greatly values Keysight's expertise, especially the company's PCIe 5.0 test solutions. Keysight's oscilloscopes, logic analyzers, bit error ratio testers and PCIe transceiver (TRX) test solutions enable SK hynix to advance development of memory semiconductors based on both DRAM and NAND technologies.
Keysight integrates hardware and software platforms to create solutions that let SK hynix perform both receiver and transmitting testing. These include:
- Infiniium UXR-Series real-time oscilloscope for visually representing variations of voltage signals as waveforms (UXR0504A)
- High-performance 64 Gbaud bit error ratio tester (BERT) for receiver testing (M8040A)
- PCI Express 5 card electro-mechanical (CEM) receiver test automation software for testing, debugging and characterizing PCIe 5.0 CEM add-in cards and systems (N5991PC5A)
- PCIe 5.0 transmitter electrical performance validation and compliance software (D9050PCIC)
Suggested Items
Real Time with… IPC APEX EXPO 2024: Circuit Board Testing Strategies and the Impact of AI
05/08/2024 |Editor Marcy LaRont speaks with Bert Horner, president of The Test Connection, about the importance of strategic planning and design-for-test (DFT). Bert touches on some common mistakes that occur when DFT is not adequately considered early on. The discussion outlines an overarching industry need for a culture shift toward increasingly higher levels of integration and collaboration. Bert mentions that AI now has an influence on testing, as everywhere else, and announces his forthcoming book.
Real Time with… IPC APEX EXPO 2024: Understanding Objective Evidence in Manufacturing Processes
05/07/2024 | Real Time with...IPC APEX EXPOGraham Naisbitt explains the importance of objective evidence in manufacturing processes, debunking the common misconception that the ROSE test is a cleanliness test. He also discusses the introduction of Rev J, a requirement for measuring ionic contamination on circuit assemblies, and the challenges in accurately measuring contamination. Alternative methods like ion chromatography and the need for updating standards like the ROSE test are mentioned.
U.S. Air Force Secretary Kendall Flies in AI-Piloted X-62A VISTA
05/06/2024 | Lockheed MartinLockheed Martin Skunk Works joined the U.S. Air Force Test Pilot School and other government and industry partners in hosting U.S. Secretary of the Air Force Frank Kendall to fly in the X-62A Variable In-flight Simulation Test Aircraft (VISTA), a one-of-a-kind aircraft modified to test artificial intelligence (AI) and autonomy capabilities.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Manta Ray UUV Prototype Completes In-Water Testing
05/02/2024 | DARPAThe Manta Ray prototype uncrewed underwater vehicle (UUV) built by performer Northrop Grumman completed full-scale, in-water testing off the coast of Southern California in February and March 2024.