Shipments of Mobile Phone Camera Modules Forecast to Reach 5.02 Billion in 2022
May 24, 2022 | TrendForceEstimated reading time: 1 minute
According to TrendForce research, smartphone camera module shipments will increase to 5.02 billion units in 2022, an annual growth rate of 5%. Since the price-performance ratio of whole devices is the primary basis for consumer purchases, the cost of high-standard solutions such as the five-camera design and main cameras sporting hundreds of millions of pixels will inevitably be passed on to the manufacturer with little improvement in sales performance. Therefore, the three-camera module remains the mainstream design this year and is forecast to account for more than 40% of total shipments. Only some smartphone models will adopt a four-camera design to differentiate their specifications, while the number of products with dual-cameras or less will fall, with entry-level models being the primary candidates.
By combining a high-pixel main camera with two low-pixel function cameras, a mobile phone can retain a three-camera design while taking into account hardware costs. TrendForce believes that this is also the primary reason for the development of low-end and mid-range products towards a three-camera or even four-camera design in addition to the increased adoption of low-pixel function cameras including 2-megapixel depth cameras and macro cameras. Growth momentum in mobile phone camera module shipments in 2022 will come primarily from additional numbers of low-pixel cameras prompted by the three-camera design. Although a high-resolution main camera with better specifications allows mobile phone brands to provide better photographic performance, pixel specifications have not continued to climb higher and mainstream cameras linger at approximately 50 million pixels, causing a slight stagnation in demand.
TrendForce indicates that mobile phone brands are currently curtailing competition in the hardware specifications of mobile phone camera modules but remain focused on photographic and video performance as promotional features of their mobile phones and will emphasize dynamic photography, night photography and other scenarios to highlight product advantages. This can be achieved not only by strengthening the optical performance of the camera module itself but also through algorithms and software, thereby increasing the enthusiasm of mobile phone brands to invest in self-developed chips. In addition to Apple and Samsung, which have long used their own SoCs, other mobile phone brands have also tried to launch self-developed chips to enhance image processing performance such as Xiaomi's Surging C1 and OPPO's MariSilicon X and VIVO's V1+.
Suggested Items
Podcast Review: On the Line With… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line With… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
EMA Webinar: Next Generation MCAD/ECAD for SOLIDWORKS
05/09/2024 | EMA Design AutomationLearn how the MCAD and ECAD experts at Hawk Ridge and EMA can help you solve your MCAD/ECAD integration challenges with this unique collaboration environment.
Sondrel Awarded New Video Processor ASIC Design and Supply Contract
05/09/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips for leading global technology brands, is pleased to announce that it has won a major ASIC design and supply contract for a next generation, video processing chip.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.