GlobalFoundries, Qualcomm Announce Extension of Long-Term Agreement to Secure U.S. Supply Through 2028
August 9, 2022 | Qualcomm Technologies, Inc.Estimated reading time: 3 minutes
Following the recent passage of the U.S. CHIPS and Science Act last week, GlobalFoundries (GF), a global leader in feature-rich semiconductor manufacturing and Qualcomm Technologies, Inc. announced they are more than doubling their existing strategic global long-term semiconductor manufacturing agreement previously entered into by GF’s and Qualcomm’s respective subsidiaries. Today’s announcement secures wafer supply and commitments to support U.S.-based manufacturing through capacity expansion at GF’s most advanced semiconductor manufacturing facility, in Malta, New York.
The announcement was made in Washington D.C. at a CEO Summit co- hosted by GF, Ford Motor Company, and Applied Materials, which included National Economic Council Director Brian Deese, Under Secretary of Defense for Acquisition & Sustainability Dr. William LaPlante, and National Security Council Senior Director for Technology & National Security Tarun Chhabra underscoring the importance of domestic manufacturing to national and economic security. The Summit included CEOs and senior leaders from across the semiconductor supply chain from tool and wafer manufacturers to key suppliers to end users of chips manufactured in the U.S.
GF has been manufacturing Qualcomm Technologies’ feature rich, high-performance chips for many years, reaching across its global footprint. In 2021, Qualcomm Global Trading Pte. Ltd (QGT), a subsidiary of Qualcomm Technologies, was one of GF’s first customers to secure their supply with a long-term agreement covering multiple geographies and technologies. That agreement secured 22FDX capacity at GF’s Dresden facility and will now include capacity at GF’s recently announced facility in Crolles, France, making QGT an anchor customer in GF’s leading European proprietary technology. QGT has also secured capacity in GF’s market leading 8SW radio-frequency silicon-on-insulator (RFSOI) technologies for Sub 6GHz 5G front-end module (FEM) which will be primarily manufactured in GF’s Singapore facilities, where site expansion plans are well underway with full ramp expected in early 2023.
Today’s announcement specifically extends QGT’s U.S. based collaboration with GF in FinFET for 5G transceivers, Wi-Fi, Automotive and IoT connectivity. GF’s FinFET platforms provide a best-in-class combination of performance, power and area that are well-suited for high-end Mobile, Automotive and IoT applications.
“This is terrific news for GlobalFoundries, Qualcomm Technologies and for upstate New York. Just days after we passed my historic, bipartisan CHIPS & Science bill, we can already see the semiconductor industry reinvesting in the United States. This deal to 2028 proves what we have always known – that the industry will grow here when we are competitive with Asia and Europe. With major new federal incentives for microchip manufacturing in the U.S., I look forward to many more announcements like this to come,” said Senate Majority Leader Chuck Schumer.
"With accelerating demand for 5G, Automotive and IoT applications, a robust supply chain is critical for ensuring innovation in these areas remains uninterrupted," said Dr. Roawen Chen, Senior Vice President and Chief Supply Chain and Operations Officer, Qualcomm Technologies, Inc. "Our continued collaboration with GF helps us to expand the next generation of wireless innovation as we move toward a world where everyone and everything can be intelligently connected."
“GF’s global manufacturing footprint enables us to partner with our customers to meet their capacity needs, where they need it,” said Dr. Thomas Caulfield, president and CEO, GF. “Our collaboration with Qualcomm Technologies delivers differentiation and innovation in mobile and IoT spanning three continents, and this long-term agreement extension provides Qualcomm Technologies with additional U.S. based manufacturing for a more resilient supply chain.”
“Today’s announcement from our CEO Summit in Washington, D.C. secures Qualcomm Technologies as a key long-term customer through 2028 in our most advanced fab in upstate New York, which together with U.S. CHIPS and state funding, will fuel expanding GF’s US manufacturing footprint. We applaud the bipartisan efforts and leadership demonstrated by Senator Schumer and the incredible support of Commerce Secretary Raimondo to bring back chip manufacturing to America,” added Dr. Caulfield.
The?global demand for semiconductors is growing at an?unprecedented rate, and GF is responding to this growth through a series of strategic long-term agreements with existing and new customers and simultaneously expanding global capacity to meet customer demand in partnership with federal and local governments. Today’s announcement with Qualcomm Technologies is an important step consistent with this economic model.
Suggested Items
NEOTech Positions Itself as Microelectronics Industry Leader with High-Technology Investments
05/09/2024 | NEOTechNEOTech, a leading provider of electronic manufacturing services (EMS), design engineering, and supply chain solutions in the high-tech industrial, medical device, and aerospace/defense markets, announces a significant investment in acquiring new Palomar 8100 wire bonder machines, enhancing the company’s positioning as a leader of cutting-edge microelectronics assemblies for mission-critical applications.
MKS’ Atotech, ESI to Participate in CPCA Show
05/09/2024 | MKS’ AtotechMKS’ Atotech, and ESI will participate in the CPCA Show 2024. The show will be held from May 13 to 15, 2024, at the National Exhibition and Convention Center (Shanghai) and will bring together domestic and international manufacturers in the electronic circuit industry.
Dragonfly Energy Announces Breakthrough in Lithium Battery Production: Eliminating Harmful 'Forever Chemicals'
05/09/2024 | Globe NewswireDragonfly Energy Holdings Corp., an industry leader in green energy storage, has made a significant breakthrough in battery manufacturing with the successful production of PFAS-free electrodes in lithium battery cells.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
All Flex Solutions Hires Mike Madetzke as Manager of R&D
05/08/2024 | All Flex SolutionsAll Flex Solutions is very pleased to announce that Mike Madetzke has joined their team as their new Manager of Research and Development.