Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Suggested Items

EMA Webinar: Maximize Your Design Productivity in OrCAD X and Allegro X

09/26/2024 | EMA Design Automation
Learn how the extensible environment in Cadence OrCAD X and Allegro X is being used to enhance and customize the PCB design flow in a webinar held by EMA on Tuesday, October 1st, 2024 @ 11am ET.

IDC Tracker: Used Smartphone Shipments Grew 6.4% in 2023 as Secondary Market Thrives Globally

09/25/2024 | IDC
More than 195 million used smartphones, including officially refurbished and used smartphones, were shipped into the market in 2023, an increase of 6.4% compared to 2022. The value of these shipments was $72.9 billion, up 12.4% year over year, according to data from the newly launched Worldwide Quarterly Used Device Tracker from International Data Corporation (IDC).

Book Excerpt: The Printed Circuit Designer’s Guide to... Thermal Management with Insulated Metal Substrates, Vol. 2, Chapter 4

09/25/2024 | I-Connect007 Editorial Team
Direct-bonded copper (DBC) with a ceramic base is a commonly used assembly technology. While advantages include excellent solder crack compensation due to similar CTE values between component and substrate, the construction is fragile and therefore places limits on size and exposure to vibration. Small assemblies in basic shapes such as a rectangle can be done, although larger, more complex shapes become difficult.

Installed Base of Wireless Devices in Industrial Automation Reached 56.5 Million in 2023

09/11/2024 | Berg Insight
A new research report from the IoT analyst firm Berg Insight says that annual shipments of wireless devices for industrial automation applications reached 10.7 million units worldwide in 2023, accounting for approximately 9 percent of all new connected nodes.

A Parametric Approach to the Environmental Impact of PCB Fabrication

09/09/2024 | Maarten Cauwe, imec
Sustainability for electronics is receiving more attention due to environmental concerns, regulatory obligations, and to ensure competitiveness in a growing market for sustainable products. To facilitate the discussion on the environmental impact of electronics, there is a strong need for data on energy use, carbon footprint, greenhouse gas (GHG) emissions, hazardous chemicals used during manufacturing, waste generation, etc. 
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in