The Right Approach: ‘Twas the Night Before Christmas (Harley-style)
It’s Only Common Sense: Dear Santa, Here’s My Sales Wish List
The New Chapter: The Benefits of Continuing Education
Indium Expert to Present on Unique High-Reliability Alloy Technologies at IEMT
September 23, 2022 | Indium CorporationEstimated reading time: 1 minute
Indium Corporation will share its industry knowledge and expertise on topics including high-temperature lead-free solder pastes for power discrete applications, and low-temperature solder pastes for wafer-level packaging applications, during two presentations at the International Electronics Manufacturing Technology (IEMT) conference, Oct. 19-21, Putrajaya, Malaysia.
Indium Corporation’s Durafuse™ HT, Sn-based high-temperature lead-free (HTLF) solder pastes designed with Durafuse ™ technology and the combined merits of two constituent alloys, have been developed as drop-in solutions to replace the high-Pb solder pastes in power discrete applications. In his presentation, A Drop-in High-Temperature Lead-Free Solder Paste that Outperforms High-Pb Pastes in Power Discrete Applications, Dr. HongWen Zhang, R&D manager, alloy group, will examine the results of a study that compared Durafuse™ HT’s performance to high-lead products.
In his presentation on low-temperature solder paste, Novel Lead-Free Lower-Temperature Solder Paste for Wafer-Level Package Application, Zhang examines the results of testing an indium-containing, low-temperature solder paste—Indium Corporation’s Durafuse™ LT—for wafer-level package (WLP) applications. During the test, Durafuse™ LT, regardless of reflow profiles, outperformed SAC305.
Dr. Zhang is manager of the alloy group in Indium Corporation’s R&D department. His focus is on the development of Pb-free solder materials and the associated technologies for high-temperature and high-reliability applications. He was instrumental in inventing the mixed-alloy solder technique to combine the merits of constituents to improve wetting, reduce processing temperatures, modify the bonding surface, and control the joint’s morphology, thus improving reliability. Dr. Zhang has a bachelor’s degree in metallurgical physical chemistry from Central South University of China, a master’s degree in materials and engineering from the Institute of Metal Research, Chinese Academy of Science, and a master’s degree in mechanical engineering and a Ph.D. in material science and engineering from the Michigan Technological University. He has a Six Sigma Green Belt from the Thayer School of Engineering at Dartmouth College, and is a certified IPC Specialist for IPC-A-600 and IPC-A-610 as well as a certified SMT Process Engineer. He has extensive experience in various aluminum (Al) alloys and fiber/particle reinforced Al-based composite materials, and Al-rich and ZrHf-based amorphous alloys. He has co-authored two book chapters on high-temperature lead-free bonding materials, has had a number of patents filed, and has been published in approximately 20 journals in the fields of metallurgy, materials science and engineering, physics, electronics materials, and mechanics.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.