DART Tests Autonomous Navigation System Using Jupiter and Europa
September 28, 2022 | NASAEstimated reading time: 3 minutes
![](https://iconnect007.com/application/files/9016/9087/0026/DRACO.jpg)
As NASA’s DART spacecraft cruises toward its highly-anticipated Sept. 26 encounter with the binary asteroid Didymos, the spacecraft’s imager — the Didymos Reconnaissance and Asteroid Camera for Optical navigation, or DRACO — has snapped thousands of pictures of stars. The pictures give the Johns Hopkins Applied Physics Laboratory (APL) team leading the mission for NASA the data necessary to support ongoing spacecraft testing and rehearsals in preparation for the spacecraft’s kinetic impact into Dimorphos, the moon of Didymos.
As the only instrument on DART, DRACO will capture images of Didymos and Dimorphos; it will also support the spacecraft's autonomous guidance system — the Small-body Maneuvering Autonomous Real Time Navigation (SMART Nav) — to guide DART to impact.
On July 1 and August 2 the mission operations team pointed the DRACO imager to Jupiter to test the SMART Nav system. The team used it to detect and target Jupiter’s moon Europa as it emerged from behind Jupiter, similar to how Dimorphos will visually separate from the larger asteroid Didymos in the hours leading up to impact. While the test obviously didn’t involve DART colliding with Jupiter or its moons, it did give the APL-led SMART Nav team the chance to assess how well the SMART Nav system performs in flight. Before this Jupiter test, SMART Nav testing was done via simulations on the ground.
The SMART Nav team gained valuable experience from the test, including for how the SMART Nav team views data from the spacecraft. “Every time we do one of these tests, we tweak the displays, make them a little bit better and a little bit more responsive to what we will actually be looking for during the real terminal event,” said Peter Ericksen SMART Nav software engineer at APL.
The DART spacecraft is designed to operate fully autonomously during the terminal approach, but the SMART Nav team will be monitoring how objects are tracked in the scene, including their intensities, number of pixels, and how consistently they’re being identified. Corrective action using preplanned contingencies will only be taken if there are significant and mission-threatening deviations from expectations. With Jupiter and its moons, the team had a chance to better understand how the intensities and number of pixels of objects might vary as the targets move across the detector.
The image below—taken when DART was approximately 16 million miles (26 million km) from Earth with Jupiter approximately 435 million miles (700 million km) away from the spacecraft—is a cropped composite of a DRACO image centered on Jupiter taken during one of these SMART Nav tests. Two brightness and contrast stretches, made to optimize Jupiter and its moons, respectively, were combined to form this view. From left to right are Ganymede, Jupiter, Europa, Io, and Callisto.
“The Jupiter tests gave us the opportunity for DRACO to image something in our own solar system,” said Carolyn Ernst, DRACO instrument scientist at APL. “The images look fantastic, and we are excited for what DRACO will reveal about Didymos and Dimorphos in the hours and minutes leading up to impact!”
DRACO is a high-resolution camera inspired by the imager on NASA's New Horizons spacecraft that returned the first close-up images of the Pluto system and of the Kuiper Belt object Arrokoth.
DART was developed and is managed by APL for NASA's Planetary Defense Coordination Office. DART is the world's first planetary defense test mission, intentionally executing a kinetic impact into Dimorphos to slightly change its motion in space. While no known asteroid poses a threat to Earth, the DART mission will demonstrate that a spacecraft can autonomously navigate to a kinetic impact on a relatively small target asteroid, and that this is a viable technique to deflect a genuinely dangerous asteroid, if one were ever discovered.
Suggested Items
Wild River Technology's ISI-USB4 Now Supports USB 4.0 Version 2 and DisplayPort 2.1
06/27/2024 | Wild River TechnologyWild River Technology (WRT), the leading supplier of signal integrity measurement and optimization test fixtures for high-speed channels at data rates of up to 25G announced today the availability of a new inter-symbol interference (ISI) loss modeling capability. The ISI-USB4 Advanced Loss Modeling Platform Test Card Set delivers comprehensive support for demanding 25G PAM4 designs.
IPC White Paper Emphasizes the Critical Importance of ‘Design for Excellence’ Throughout the Full Ecosystem of Electronics Design
06/27/2024 | IPCA new white paper from IPC’s Chief Technologist (CTC) and Design Leadership (DLC) Councils, Better Electronics by Design: Next Generation Design Needs explores the elements of the “Design for Excellence” methodology, re-thinking how it needs to be further defined and applied in the full ecosystem of electronics design.
ViTrox Americas Opens New State-of-the-Art Demo Lab in Hutto, Texas
06/27/2024 | ViTroxViTrox Americas Inc. is proud to announce the opening of its new demo lab in Hutto, Texas. This cutting-edge facility is now ready for demonstrations and evaluations, showcasing ViTrox's latest innovations in 3D inspection technology.
Cadence Expands System IP Portfolio with Network on Chip to Optimize Electronic System Connectivity
06/26/2024 | Cadence Design Systems, Inc.The Cadence Janus NoC manages these simultaneous high-speed communications efficiently with minimal latency, enabling customers to achieve their PPA targets faster and with lower risk.
Space Engine Systems Announces Partnership With ASEI (USA) to Develop Hypersonic Solutions for Missiles
06/26/2024 | BUSINESS WIRESpace Engine Systems (SES), following on its success in securing a place in UK MoD’s Hypersonic Technology and Capability Development Framework (HTCDF), is pleased to announce a partnership with Applied Systems Engineering Inc (ASEI) of the US.