The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Indium to Feature Products for HIA and SiP at IMAPS Device Packaging Conference
March 8, 2023 | Indium CorporationEstimated reading time: 1 minute
As an industry leader in innovative materials solutions for heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications, Indium Corporation will feature innovative products designed to meet the evolving challenges of SiP and HIA at the 19th International Conference and Exhibition on Device Packaging hosted by IMAPS, March 13?16, in Fountain Hills, AZ.
Indium Corporation’s proven SiPaste® series is specifically designed for fine feature printing with fine powders ranging from Type 5 to Type 8. They help Avoid the Void®, reduce slumping, and demonstrate consistent superior printing performance. The newly released SiPaste® C201HF offers the same superior printing performance with the benefit of having a cleanable chemistry with semi-aqueous-based solutions.
As the industry leader in no-clean semiconductor flux, Indium Corporation will feature the first low-residue no-clean, ball-attach flux on the market, NC-809. NC-809 is a dual-purpose flux, engineered with high-tack characteristics for flip-chip applications and with adequate wetting power for ball-attach applications. This material is designed to hold die or solder spheres in place without risk of die shift or solder sphere movement during the assembly process.
NC-809 is designed to leave minimal residue after reflow, at the level of Indium Corporation’s proven ultra-low residue (ULR) flip-chip fluxes, such as NC-26S and NC-699. NC-809 exhibits superior wetting performance and is the first ULR flux qualified for ball grid array ball-attach applications for packages that are sensitive to traditional water cleaning processes. NC-809 also improves production yields by eliminating costly cleaning steps that can increase substrate warpage, both after reflow and before the underfilling steps, creating the potential for die damage and cracked solder joints.
Indium Corporation will also feature Indium12.8HF, an award-winning, no-clean, halogen-free solder paste formulated to be compatible with a wide range of microdispensing and jetting systems. Indium12.8HF provides exceptional deposition performance, and its unique oxidation barrier promotes complete powder coalescence during reflow to eliminate graping and similar reflow issues.
Additionally, Indium Corporation will showcase QuickSinter®, a high metal content paste, redefining sinter technology. Available in pressureless and pressure formulations, this portfolio of sintering solutions delivers products engineered for customers’ specific application needs.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.