SK Hynix to Expand Wuxi Fab Legacy Production Capacity, Consumer DRAM Prices Struggle to Recover
May 4, 2023 | TrendForceEstimated reading time: 2 minutes

Last October, the US Department of Commerce imposed semiconductor restrictions on Chinese imports of equipment for processes of 18nm and below. SK hynix’s Wuxi fab was granted a one-year production license, but geopolitical risks and weak demand prompted the company to reduce wafer starts by about 30% per month in 2Q23, according to TrendForce's latest research.
TrendForce reports that SK hynix had planned to transition its Wuxi fab’s mainstream process from 1Y nm to 1Z nm, decreasing the output of legacy processes. However, due to limitations imposed by the US ban, the company instead opted to increase the share of its 21 nm production lines, focus-ing on DDR3 and DDR4 4Gb products. SK hynix’s long-term strategy involves shifting its capacity expansion back to South Korea, while the Wuxi fab caters to domestic demand in China and the legacy-process consumer DRAM market.
DDR3 and DDR4 4Gb chips account for less than 30% of SK hynix’s overall consumer DRAM shipments. However, the company is extending its legacy production lines, which means the supply of low-density consumer DRAM will gradually increase. An analysis of the Taiwanese supply chain reveals Nanya, Winbond, and PSMC (which assist IC design houses with DRAM production) all supply DDR3 4Gb; only Nanya provides large-scale shipments of DDR4 4Gb. The three main suppliers and Nanya have process nodes of around 20 nm for DDR3 4Gb. Samsung currently supplies both 20 nm and 1X nm process nodes for DDR4 4Gb and plans to transition to 1Z nm in the second half of 2023, taking the lead in the process structure. Micron, however, does not provide this particular chip density, while both SK hynix and Nanya are around 20 nm. In general, other Taiwanese manufacturers primarily focus on DDR3 products, and their product nodes remain at 25 nm. Although Winbond and PSMC are developing 20 nm processes, they continue to lag behind their competitors when it comes to mass production.
Demand for consumer DRAM remains unstable, and prices are expected to continue declining throughout 2Q23
Despite a slight uptick in demand due to earlier TV inventory digestion, which led to a modest increase in SoC orders, the market continues to face challenges. Automotive demand has been relatively stable, but the market size is still limited, and the visibility of network communication demand remains low. TrendForce asserts that although DRAM suppliers have cut back on consumer DRAM production, the current state of supply and de-mand is still leaning towards an oversupply when considering inventory levels. Consequently, 2Q23 should see an average price drop of 10–15%. In the long run, increased output from the Wuxi fab could put additional pressure on suppliers, making it even more difficult for consumer DRAM prices to rebound.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Advint and Sayron Bring Advanced Rectifier Solutions to High-Reliability PCB Manufacturers
08/01/2025 | Advint IncorporatedAdvint Incorporated has partnered with Sayron, a leading global rectifier manufacturer, to supply cutting-edge IGBT-based DC rectifiers to high-performance PCB manufacturers across North America and beyond. Sayron’s precision-engineered rectifiers align with the stringent requirements of advanced PCB processes.
Trouble in Your Tank: Metallizing Flexible Circuit Materials—Mitigating Deposit Stress
08/04/2025 | Michael Carano -- Column: Trouble in Your TankMetallizing materials, such as polyimide used for flexible circuitry and high-reliability multilayer printed wiring boards, provide a significant challenge for process engineers. Conventional electroless copper systems often require pre-treatments with hazardous chemicals or have a small process window to achieve uniform coverage without blistering. It all boils down to enhancing the adhesion of the thin film of electroless copper to these smooth surfaces.
Magnalytix’s Dr. Mike Bixenman to Guide PDC at SMTA High-Reliability Cleaning and Conformal Coating Conference
07/31/2025 | MAGNALYTIXMagnalytix, providing real-time reliability solutions for electronics manufacturing, is excited to announce that Dr. Mike Bixenman will present the professional development course “The Effects of Flux Residues and Process Contamination on the Reliability of the Electronic Assembly” on Wednesday, Aug. 13 at 9:00 AM CST to open the second day of the STMA High-Reliability Cleaning and Conformal Coating Conference.
Setting Design Constraints Effectively
07/31/2025 | Stephen V. Chavez, Siemens EDAPCB design requires controlling energy within the medium of a PCB. The manner in which we control the chaos of energy is by implementing and utilizing physical and electrical rules, known as constraints, along with a specific structure and material(s) that make up what is known as the foundation of the design. These rules govern everything within the PCB structure and generally fall into two camps: performance and manufacturability. Setting this foundation correctly is extremely important and the key to success.
FlashPCB Enhances SMT Production Line with Heller 1809 Reflow Oven and KIC ProBot
07/31/2025 | FlashPCBFlashPCB, a leading provider of quick-turn PCB assembly, has expanded its surface mount production capabilities with the installation of a Heller 1809 MKII reflow oven paired with the KIC ProBot automatic profiling system. This addition supports FlashPCB’s goal of achieving faster throughput, higher quality assurance, and consistent process control across a wide range of PCB builds.