NTU Singapore, Delta Electronics Set Up S$24 Million Corporate Lab for Advanced Robotic Rechnologies
June 7, 2023 | PRNewswireEstimated reading time: 3 minutes
Nanyang Technological University (NTU Singapore) and Delta Electronics, global provider of IoT-based Smart Green Solutions, have established the S$24 million Delta-NTU Corporate Lab for Advanced Robotics, continuing their close collaboration in research & development for advanced technologies.
The lab, supported under Singapore's National Research Foundation's Research Innovation and Enterprise (RIE) 2025 plan, will develop over three years next-generation technologies aimed at overcoming labour shortage challenges for the manufacturing and intralogistics - the logistical flows of goods and materials that take place on a company's site – industries.
Collaborative robotic systems are set to become a staple as businesses transit into Industry 5.0, and as the world grapple with a manpower crunch arising from an ageing workforce and declining birth-rates. Such systems include human-touch inspired robots that can adjust their grip to pick up a range of materials, from fragile glassware to volatile chemicals, and smart sensing, radar and 3D sensors systems, which allow autonomous mobile robots (AMRs) to operate in a dynamic environment with human traffic like hospitals and warehouses.
The joint lab was launched today in a ceremony attended by Minister of State for the Ministry of Trade & Industry, Mr Alvin Tan; NTU President Professor Ho Teck Hua and Delta Electronics Chairman, Mr Yancey Hai.
Professor Ho said: "This corporate lab with Delta Electronics proves that NTU's research activities are industry relevant. The lab creates opportunities for us to translate our research into impactful, real-world innovations. This is in line with the NTU 2025 strategic vision, to harness the power of digital and advanced technologies to support the discovery of new knowledge and promote better learning and living experiences."
Yancey Hai, Chairman, Delta Electronics, Inc., underscored: "We are honoured to further our long-term cooperation with NTU following the success in the field of cyber-physical systems, especially as our new joint Delta-NTU Corporate Lab for Advanced Robotics has earned the support of Singapore's RIE 2025 initiative. We intend to leverage Delta's smart manufacturing prowess and autonomous mobile robot know-how, as well as our Delta-NTU R&D talent to develop essential technologies for the next-generation of autonomous mobile robots. The innovation milestones of this lab will help multiple industries solve key challenges, enhance Singapore's long-term resilience, and improve the quality of life of its citizens."
Deepening Collaboration
The establishment of the joint lab marks a new phase of the partnership between NTU and Delta Electronics.
In 2016, the Delta - NTU Corporate Laboratory for Cyber-Physical Systems was launched with a focus on using cyber-physical systems to build technological capabilities for use in Smart Manufacturing and Smart Learning. In 2018, the lab was expanded to accommodate more research activities.
The first chapter of the collaboration has achieved success. Over the five years, the team filed 17 patents, of which 8 have been issued, and submitted over 200 papers to journals and conferences. It also supported more than 140 NTU research staff and graduate students, as well as scientists and engineers from the Delta Research Centre in Singapore.
Notable projects include a universal smart navigation system where logistics robots autonomously move goods around factory floors, and a learning analytics technology to improve learning effectiveness in the education industry. These innovations, which were test bedded on NTU's Smart Campus, are now being scaled up for wider adoption in the industry.
Tzi-cker Chiueh, General Director of the Delta Research Centre, said: "We have secured various patents through our collaboration with NTU Singapore. These achievements demonstrate the high potential for commercialization of the technologies we have developed together. Some of these patents relate to 3D mapping and localization for automated guided vehicles, human tracking and re-identification, and robotic arm manipulation techniques. This intellectual property will serve as a solid foundation for this new lab, and thus, we look forward to working together to meet the complex needs of several industries."
Co-Director of the Delta-NTU Corporate Lab for Advanced Robotics, Associate Professor Andy Khong, said: "Encouraged by the strong foundation laid in NTU's initial collaboration with Delta Electronics, we are now ready to deepen the partnership by moving into research & development for advanced robotics. The joint research team aims to develop cutting-edge solutions that can address real-world challenges in a sustainable manner, in line with NTU's Sustainability Manifesto which aims to strengthen global partnership for sustainable development."
Professor Quek Tong Boon, Chief Executive of the National Robotics Programme (NRP), said: "The National Robotics Programme welcomes this NTU-Delta partnership and looks forward to the build-up and commercialisation of more differentiated robotics capabilities for the manufacturing and logistics domains in Singapore and beyond. We hope to see more of such Institutes of Higher Learning -Industry collaborations which form an integral part of our growing robotics ecosystem."
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.