Dan’s Biz Bookshelf: 'This Is Strategy: Make Better Plans'
The Chemical Connection: Reducing Defects in Circuit Board Production
It’s Only Common Sense: Trust Is All You Need
Keysight, CTTL Complete First CTIA MIMO Over-the-Air Dynamic Channel Model Test System Validation
August 2, 2023 | Business WireEstimated reading time: 1 minute
Keysight Technologies, Inc. has built the first MIMO over-the-air (OTA) dynamic channel model test and user equipment (UE) performance validation system with China Telecommunication Technology Labs (CTTL) based on CTIA requirements for the 5G New Radio (NR) FR1 frequency band.
UE suffers from performance degradation in real-world use due to various propagation channel effects. These issues are addressed by optimizing UE hardware and software design and validating them under real-world conditions. To do this, design engineers need consistent, reliable, and repeatable digital twins that can emulate the real-world channel effects.
Keysight and CTTL collaborated to meet this need by integrating the first CTIA-compliant MIMO OTA test system with a dynamic channel model validation test. The new validation tool is based on Keysight’s OTA Emulation Solutions that emulates real world environments to perform OTA testing for UE with multiple antennas. The Keysight solution includes:
- Keysight PROPSIM Channel Emulation Solution
- Keysight UXM 5G Network Emulation Solution
- Keysight PNA Network Analyzer
- Keysight UXA Signal Analyzer
Xu-Dong An, Director of OTA and LBS Division at CTTL, said: “The new 5G dynamic MIMO test solutions further expand our ability to serve a wide range of customers. With this addition, CTTL-Terminals is poised to provide comprehensive services for research, development, testing, and certification across the entire industry.”
Peng Cao, Vice President and General Manager at the Keysight Wireless Test Group said: “We are pleased to provide the first test system in the world for MIMO OTA with dynamic channel model validation. Keysight will continue driving the development of industry standards as a leading contributor in CTIA.”
Share on:
Suggested Items
Orbel Corporation Integrates Schmoll Direct Imaging
06/04/2025 | Schmoll AmericaOrbel Corporation in Easton, PA, proudly becomes the first PCM facility in the U.S. equipped with Schmoll’s MDI Direct Imaging system. This installation empowers Orbel to support customers with greater precision and quality.
BAE Systems Unveils Comprehensive Line of M-Code GPS Receivers at Joint Navigation Conference
06/04/2025 | PRNewswireBAE Systems unveiled a diverse line of M-Code Global Positioning System (GPS) receiver solutions at the Joint Navigation Conference in Cincinnati this week, rounding out an extensive line of products that ensure U.S. warfighters have the most dependable GPS systems available across sea, land, and air.
Rehm Thermal Systems Mexico: Ten Years of Growth and Innovation in an Emerging Market
06/03/2025 | Rehm Thermal SystemsOver ten years ago, Luis A. Garcia began his success story at Rehm Thermal Systems. On May 15, 2013, he initially joined as a member of the Rehm USA team.
Indium Joins Virginia Tech Center for Power Electronics Systems Industry Consortium
06/03/2025 | Indium CorporationIndium Corporation®, a leading materials refiner, smelter, manufacturer, and supplier to the global electronics, semiconductor, thin-film, and thermal management markets, has joined Virginia Tech’s Center for Power Electronics Systems (CPES), an industry consortium that supports power electronics initiatives to reduce energy use while growing capability.
UHDI Fundamentals: UHDI Drives Unique IoT Innovation—Smart Homes
06/03/2025 | Anaya Vardya, American Standard CircuitsThe combination of UHDI's high-bandwidth capabilities and IoT's real-time data processing can lead to more efficient, immersive, and smarter IoT systems. This convergence of two revolutionary technologies is enabling quantum advancements in some very “unconventional” applications.