The Government Circuit: News on Defense Electronics, Europe, and Sustainability
American Made Advocacy: Taking the Fight to Capitol Hill
Defense Speak Interpreted: SWaPing Nanosatellites for Defense Systems
American Standard Circuits Now Offers ENEPIG Surface Finish
September 18, 2023 | American Standard CircuitsEstimated reading time: 1 minute
Illinois-based PCB fabricator, American Standard Circuits, is now offering in-house ENEPIG surface finish. ENEPIG is the solution to multiple surface finish requirements within one multi metal plating operation.
Utilizing nickel as the traditional barrier layer, the Electroless Palladium creates a buffer between the nickel and the gold. This prevents the interaction of the corrosion of the nickel to allow the ion exchange necessary for the Immersion gold. In a traditional ENIG process the nickel is corroded in order to exchange the nickel surface for the immersion gold reaction (reduction). This can lead to intergranular corrosion of the nickel, particularly where the phosphorous and the nickel meet within the co-deposition of nickel and phosphorous (6-9%).
Using Electroless Palladium, the gold is deposited in a partial immersion process (corrosion) which becomes autocatalytic after the initiation of plating of the gold. This removes any corrosion of the nickel and the subsequent risk of Black Pad. In addition to the obvious risk mitigation, it also provides a highly solderable and wire bondable surface without the use of multiple plated thicknesses of electrolytic soft gold. Typically, a thinner gold for solderability (<10µ”) and a thicker deposit for wire bondability (>50µ”).
The ENEPIG process provides the best of both worlds in a single process sequence as well as complete encapsulation of all copper features.
Educational titles from American Standard Circuits:
- The Printed Circuit Designer’s Guide to…?Fundamentals of RF/Microwave PCBs
- The Printed Circuit Designer’s Guide to… Flex and Rigid-Flex Fundamentals
- The Companion Guide to Flex and Rigid-Flex Fundamentals
- The Printed Circuit Designer’s Guide to… Thermal Management: A Fabricator's Perspective
-
Visit I-007eBooks.com?to download these and other free titles.
Share on:
Suggested Items
Fresh PCB Concepts: PCB Design Essentials for Electric Vehicle Charging
11/27/2024 | Team NCAB -- Column: Fresh PCB ConceptsElectric vehicles (EVs), powered by electricity rather than fossil fuels, are transforming transportation and reducing environmental impacts. But what good is an EV if it can't be easily charged? In this month's column, Ramon Roche dives into the role of printed circuit boards (PCBs) in electric vehicle charging (EVC)—and the design considerations.
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.