Smart Fabrics’ Informed Touch Can Tell You Where to Go
September 4, 2023 | Rice UniversityEstimated reading time: 4 minutes
Personal devices feed our sight and hearing virtually unlimited streams of information while leaving our sense of touch mostly … untouched.
A wearable, textile-based device developed by Rice University engineers could help declutter, enhance — and, in the case of impairments — compensate for deficiencies in visual and auditory inputs by tapping this underused sensory resource.
“Technology has been slow to co-opt haptics or communication based on the sense of touch,” said Barclay Jumet, a mechanical engineering PhD student who is the lead author on a study published in Device. “Of the technologies that have incorporated haptics, wearable devices often still require bulky external hardware to provide complex cues, limiting their use in day-to-day activities.”
The system of haptic accessories built by the Rice labs of Daniel Preston and Marcia O’Malley reduces the need for hardware by programming haptic cues into the textile structure of the wearables using fluidic control, building on an approach described in prior work.
“With a traditional control system using voltage and current, you’d typically need many electronic inputs to achieve complex haptic cues,” said Preston, an assistant professor of mechanical engineering at Rice whose lab explores the intersection of energy, materials and fluids. “In this device, we’ve offloaded a lot of that complexity to the fluidic controller and require only a very limited number of electronic inputs to provide sophisticated haptic stimulation.”
Comprised of a belt and textile sleeves, the wearables rely on fluidic signals — such as pressures and flow rates — to control the delivery of complex haptic cues, including sensations like vibration, tapping and squeezing. A small, lightweight carbon dioxide tank affixed to the belt feeds airtight circuits incorporated in the heat-sealable textiles, causing quarter-sized pouches — up to six on each sleeve — to inflate with varying force and frequency.
In an experiment demonstrating the device’s utility for real-world navigation, these cues served as directions guiding a user on a mile-long route through the streets of Houston. In another experiment, a user outlined invisible Tetris pieces in a field by following the directions conveyed to them through the haptic textiles.
“The belt incorporates a slimmed-down version of the electronic control system that might otherwise be required,” Jumet said. “In this case, we had twelve pouches across two sleeves progressively inflate to indicate one of four directions: forward, backward, left or right. So instead of requiring twelve electronic inputs, we embed that complexity into the sleeve and are able to use only four inputs — a reduction by two-thirds.
“In the future, this technology could be directly integrated with navigational systems, so that the very textiles making up one’s clothing can tell users which way to go without taxing their already overloaded visual and auditory senses — for instance by needing to consult a map or listen to a virtual assistant.”
Moreover, the wearable textile device could incorporate other sensing and control mechanisms to allow users with limited vision or hearing to detect obstacles and navigate dynamic environments in real time.
“Devices like this could, for instance, be helpful for people suffering from hearing loss,” said O’Malley, chair of the Department of Mechanical Engineering and the Thomas Michael Panos Family Professor in Mechanical Engineering, Electrical and Computer Engineering, Bioengineering and Computer Science at Rice.
Cochlear implants can restore speech perception for people with severe hearing loss, but the literature shows that these individuals still struggle to understand speech in noisy environments and can experience difficulty locating the sources of sounds. Haptic feedback has the potential to enhance cochlear implant performance or make lip-reading easier for patients.
“You’ll have better recognition and interpretation of the sounds processed by the cochlear implant if they’re reinforced with haptic cues conveying the same information encoded in a different way,” O’Malley said.
Another application example is restoring the sense of touch for an amputee by embedding sensors on a prosthesis to gather data that the wearables could relay as haptic feedback elsewhere on the body.
“The haptic feedback experienced by the user would in this case be directly correlated with the actions they’re taking,” said O’Malley, who directs the Mechatronics and Haptic Interfaces Lab at Rice. “One of the big advantages with using these smart textiles for haptic devices is that they bring a lot more freedom and flexibility to the design space. We’re no longer constrained by the size or geometry of components that need to be incorporated into a design.”
The heat-sealable textiles are resilient to wear and tear, making the device suitable for intensive daily use.
“We tested the durability of our haptic textiles by washing a device 25 times then cutting it open with a knife and ironing a textile patch over the cut,” Jumet said. “It continued to work as intended after repeated washing, cutting and repairing.”
Jumet expressed the hope that, in addition to serving as the basis for medically-useful applications, haptic textiles could “enable a more immersive and seamlessly-connected world.”
“Instead of a smart watch with simple vibrational cues, we can now envision a ‘smart shirt’ that gives the sensation of a stroking hand or a soft tap on the torso or arm,” he said. “Movies, games and other forms of entertainment could now incorporate the sense of touch, and virtual reality can be more comfortable for longer periods of time.”
Suggested Items
P&R Measurement Showcases AI-Empowered Solutions at CES 2025
01/03/2025 | PRNewswireP&R Measurement, a leader in precision measurement and control solutions, is set to make a groundbreaking announcement at CES 2025, taking place from January 7 to 10 in Las Vegas. As the world's largest consumer electronics event, CES 2025 (Consumer Electronics Show®) will focus on the theme "Dive In," exploring how the synergy between humanity and next-generation technologies can address global challenges and shape the future.
Spotlight on PEDC: Filbert Arzola
12/19/2024 | Andy Shaughnessy, Design007 MagazineIPC and FED have teamed up to create a new PCB design conference in Vienna, Austria. The Pan-European Electronics Design Conference (PEDC) takes place Jan. 29-30 at the NH Danube City hotel in Vienna. Raytheon’s Filbert Arzola is presenting “Engineering and Adapting Model-based PCB Design in Step with Sustainability and Digital Twins” at PEDC. I asked Filbert to discuss what attendees can expect from his class.
Accurate Circuit Engineering on Passion and Pushing the Envelope
12/03/2024 | Andy Shaughnessy, Design007 MagazineIn this interview at PCB Carolina in November, James Hofer, general manager of Accurate Circuit Engineering (ACE), shares insights into the company’s innovative approach to component embedding and highlights the passion and dedication driving his team’s commitment to quality and innovation in PCB manufacturing. James is still having fun as they push boundaries and do some pretty cool things in the process.
Siemens Unveils Next Generation AI-enhanced Electronic Systems Design Software
11/13/2024 | SiemensSiemens Digital Industries Software announced today the latest advancement in its electronic systems design portfolio. The next generation release takes an integrated and multidisciplinary approach, bringing together Xpedition™ software, HyperLynx software and PADS Professional software into a unified user experience that delivers cloud connectivity and AI capabilities to push the boundaries of innovation in electronic systems design.
Happy’s Tech Talk #34: Producibility and Other Pseudo-metrics
11/12/2024 | Happy Holden -- Column: Happy’s Tech TalkAs an engineer, I thrive on data, and one of my favorite forms is metrics. However, the one metric that has always challenged me is producibility. I define this as more than just passing a DRC in CAM, but the entire envelope of “simplicity of design,” “suitability for test,” and many more. Yet, producibility seemed to be different for different engineers and we had no clear way to establish and define producibility other than opinion. When I worked at HP, the company invested in a methodology called design for manufacturing and assembly using the GE/Hitachi Methodology and Dewhurst-Boothroyd software. Finally, I had a methodology that created a producibility score.