Matrix Reports Growing Demand for Automated Dry Film Mylar Peeling Equipment
September 18, 2023 | Matrix ElectronicsEstimated reading time: 1 minute
This past year Matrix introduced the Advanced Engineering PMA101-CPB Mylar Peeler to the North American market. The PMA101-CPB Mylar Peeler is one of the most successful products in this category with over 200 units sold globally. This latest version of the mylar peeler was released in mid-2022 with a fully enclosed cabinet and upgraded PLC to support growing Industry 4.0 requirements in the PCB fab market. This machine can operate as a standalone unit or be combined with Advanced Engineering SRV automated load, unload equipment to connect to a customer’s DES line.
Matrix and Advanced Engineering introduced a demo program to launch and introduce this equipment to the North American marketplace. This demo program allowed the use of the PMA101-CPB at a customer facility for up to 6 weeks to experience the performance firsthand. In one recent trial our customer ran approximately 30,000 innerlayer and outerlayer panels with virtually no mylar peeling issues associated with this machine and has now ordered a new machine and loader for their operation. News of the success and capability of this machine is growing. Currently there is a waiting line for this demo unit.
“Historical performance of dry film mylar peeling equipment has been mixed at best. When we started the promotion of the PMA101-CPB nearly every potential customer stated – “They don’t work, I tried this in the past and it was a disaster”. We are pleased to share the real-world breakthrough performance capability of this machine can provide reliable and consistent day after day performance. We are eager to share this experience with others so they can take advantage of an automated solution to rid of one of the most laborious manual tasks in our PCB fabs.” says Bob Berg, VP Business Development and Manager of Matrix Equipment Group.
To learn more about The Advanced Engineering PMA101-CPB Mylar Peeler please visit the Equipment page of the Matrix Electronics website. Please contact your local Matrix Sales Representative if interested in participating in the PMA101-CPB demo program.
Suggested Items
ITW EAE Receives 2024 Jabil Strategic Supplier Award
12/13/2024 | ITW EAEITW EAE is proud to announce that it has been honored with the prestigious 2024 Jabil Best Strategic Supplier Award. The award was presented during the Jabil Asia Indirect Supplier Conference held on November 28, 2024, in Shenzhen, China.
Burkle's Marco Schaible Joins VDMA Photovoltaic Equipment Division’s Executive Board
12/13/2024 | Burkle AmericaThe Photovoltaic Production Equipment Department of the VDMA held regular elections at its board meeting on December 5 and confirmed the top management. Prof. Dr. Peter Fath, RCT Solutions GmbH, was re-elected as Chairman of the Board and Dr. Stefan Rinck, Singulus Technologies AG, was re-elected as Deputy Chairman.Burkle America is proud to announce that Marco Schaible, our Vice President of PV and Glass Solutions, has been confirmed as a member of the new Executive Board for the VDMA’s Photovoltaic Production Equipment Division. This appointment reflects Marco’s exceptional expertise and commitment to advancing innovation and competitiveness in the German-European solar machinery industry.
Global Total Semiconductor Equipment Sales Forecast to Reach a Record of $139 Billion in 2026
12/09/2024 | SEMIGlobal sales of total semiconductor manufacturing equipment by original equipment manufacturers (OEMs) are forecast to set a new industry record, reaching $113 billion in 2024, growing 6.5% year-on-year, SEMI announced in its Year-End Total Semiconductor Equipment Forecast – OEM Perspective at SEMICON Japan 2024.
Understanding Depreciation for Electronic Manufacturers
12/04/2024 | Doug Palladino, ASC Sunstone CircuitsAs a PCB design engineer, your focus is on creating innovative, cost-effective designs. However, the financial aspects behind your designs—such as depreciation—play a significant role in the overall business. While depreciation may sound like "accounting speak," understanding it can help you make better decisions for your projects, especially when dealing with equipment, machinery, or even intangible assets like software licenses.
It’s Only Common Sense: Make the Investment Where It Really Counts
12/05/2024 | Dan Beaulieu -- Column: It's Only Common SenseWhen I consider the real cost to manufacture a product, I think about the misguided and short-sighted decisions business owners and managers sometimes make in response to tough times. I’m amazed at how often I hear about PCB shop owners who complain about not having enough business, yet their solution isn’t to hire more salespeople or invest in marketing. Nope. Instead, they go out and buy a shiny new drill.