Keysight, Synopsys, and Ansys Accelerate RFIC Semiconductor Design for TSMCSeptember 28, 2023 | Keysight Technologies, Inc.
Estimated reading time: 3 minutes
Keysight Technologies, Inc., Synopsys, Inc., and Ansys announced a new reference flow for the TSMC N4PRF, the world's leading semiconductor foundry's advanced 4 nanometer (nm) radio frequency (RF) FinFET process technology. The reference flow is based on the Synopsys Custom Design Family, which provides a complete RF design solution for customers seeking an open RF design environment with higher predictive accuracy and productivity. It provides designers with a choice of best-in-class solutions and includes validated integrations with radio frequency integrated circuit (RFIC) design and interactive electromagnetic (EM) analysis tools from Keysight and EM modeling and signoff power integrity solutions from Ansys.
Next-generation wireless systems feature higher bandwidth, more connected devices, lower latency, and broader coverage. Design complexity of RF integrated circuits used for wireless data transmission such as transceivers and RF front-end components continues to grow. Higher circuit frequencies, smaller feature sizes, and complex layout-dependent-effects make high speed design physics challenging, requiring more accurate and comprehensive modeling and simulation to achieve the highest performance and robust product reliability.
The TSMC N4PRF design reference flow improves design turnaround time and layout productivity in the Synopsys Custom Compiler™ design and layout environment with rigorous validation using critical design components including low noise amplifiers (LNAs) and LC-tuned voltage controlled oscillators (LC VCOs). The reference flow features industry-leading tools that enable efficient passive device synthesis, EM model extraction, thermal-aware electromigration analysis extended to include device metal, and post-layout extraction with correct handling of circuit under inductor (CUI) structures.
In addition to Synopsys Custom Compiler, the open, modern reference flow incorporates:
Signoff accuracy circuit simulation performance from Synopsys PrimeSim™ simulation tools and PrimeSim™ Reliability Environment, and signoff physical verification and extraction solutions from Synopsys IC Validator™ and Synopsys StarRC™.
Ansys Totem™ provides thermal-aware signoff electromigration verification and power integrity analysis (EM/IR). RaptorX™ and Exalto™ provide electromagnetic modeling, with unique CUI features enabling significant area reductions. VeloceRF™ delivers fully automatic silicon layout synthesis for electromagnetic devices including multi-layer inductor spiral, baluns/transformers, and transmission lines.
Keysight PathWave ADS RFPro provides rapid, interactive EM-circuit co-simulation and analysis to find and fix layout-dependent-effects up front in the development cycle. PathWave RFIC design (GoldenGate) supports harmonic balance simulation in early chip design and verification process.
Niels Faché, Vice President and General Manager, Keysight EDA, said: "Keysight, Synopsys, and Ansys have expanded their strategic technology collaboration with TSMC to deliver the next level in RF design for TSMC's advanced 4nm RF technology. We've witnessed RF designers struggling to use older-generation solutions and flows that were never intended for today's WiFi-7 system-on-chip and RF subsystem designs. New layout-dependent-effects make detailed simulation and modeling that is signoff accurate a must-have. Other commercial tools and workflows do not always include these newest foundry requirements, and often lack the capacity to model modern analog designs with hundreds of coupled signal ports."
Sanjay Bali, Vice President Strategy and Product Management EDA Group, Synopsys, said: "Synopsys, Ansys, and Keysight have harnessed decades of expertise in custom analog, RF, and multi-physics design to reduce risk and accelerate success for our mutual customers. Our latest collaboration with Ansys and Keysight on the new RF design reference flow supporting TSMC's advanced N4P process provides an open and optimized flow that delivers exceptional quality-of-results for advanced WiFi-7 systems."
John Lee, Vice President and General Manager, Electronics, Semiconductor, Optics Business, Ansys, said, "Multiphysics raises novel challenges for our customers to optimize power, area, reliability, and performance as RF frequencies climb into the millimeter wave and sub-THz range. First-pass customer success depends upon applying best-in-class solutions across the design flow. Our partnership with Keysight and Synopsys is working closely with TSMC to make our industry-leading power integrity and electromagnetic modeling technology available in a custom design flow that responds to the needs of high-speed circuit designers."
It makes sense to optimize your board using design for manufacturability (DFM) techniques. But applying DFM best practices can be confusing without formal training. The results are designs that are often incomplete, poorly designed, or too complex. When these issues arise, your PCB manufacturing partner rejecting the design can be considered a best-case scenario because it means they have your back. If your design is simply dropped into an automated queue without concern for manufacturability, the output can be a batch of unusable boards.
Siemens Digital Industries Software announces availability of a new process design kit (PDK) from Samsung Foundry that helps mutual customers boost the reliability, quality and robustness of their next-generation integrated circuit (IC) designs manufactured using the foundry’s latest processes.
RS Group Selects Siemens' EDA Simulation Technology for New Cloud Native DesignSpark Circuit Simulator12/05/2023 | PRNewswire
Siemens Digital Industries Software announced that the RS Group plc, a global provider of product and service solutions to more than 1.1 million industrial customers, has selected Siemens as its strategic electronic design automation (EDA) provider for its new, cloud native, DesignSpark Circuit Simulator tool – empowering users to streamline the design process.
EMA Design Automation to Spin-Off IP & Services Group to Enable Digital Transformation for the Entire CAD Industry12/04/2023 | EMA Design Automation
EMA Design Automation, the world's premier EDA VAR, is spinning off their IP, content, and services group as a new company named Accelerated Designs, LLC with a focus on CAD agnostic solutions.
SINBON Electronics, a provider of integrated solutions for electronic component design and manufacturing, recently obtained UL certification for its NACS (The North American Charging Standard) AC/DC charging cable. SINBON is the first electronic design service provider in Greater China to obtain this certification, and the first batch of charging cable orders has been shipped this week.