Dan’s Biz Bookshelf: 'This Is Strategy: Make Better Plans'
The Chemical Connection: Reducing Defects in Circuit Board Production
It’s Only Common Sense: Trust Is All You Need
ECD Introduces 20-Channel M.O.L.E. EV20 Touchscreen Thermal Profiler
November 14, 2023 | ECDEstimated reading time: 2 minutes
ECD has developed a new 20-channel M.O.L.E. touchscreen thermal profiler for high-value, high-reliability electronic assemblies that require multiple thermal measurements. The M.O.L.E. EV20 is the second product in ECD’s EV-series thermal profilers, built on the market’s only profiling platform with full-color touchscreen control. M.O.L.E. EV20 replaces the company’s MEGAM.O.L.E. 20 and delivers significant ease-of-use and technological enhancements.
Foremost among the M.O.L.E. EV20’s productivity benefits is the process control immediacy it offers operators. Thermal profiles can be seen in real time, allowing corrective actions if required. By contrast, other thermal profilers require a PC data download, which adds time and complexity to the process. Calculation templates, configuration, profile selection and modification, and pass/fail analysis are all managed through the intuitive, handheld touchscreen M.O.L.E. EV20. The ability to interact with and control the profiler on the shop floor helps reduce required operator training, limits errors, and raises efficiency.
While the touchscreen management capability is the most significant element of the redesign, the new M.O.L.E. EV20 has also integrated user-friendly and economical features compared to its predecessor, as ECD Electronics Division Manager Mark Waterman explains.
“We wanted to use the new platform as an opportunity also to add simplicity and cost-effectiveness to high channel count capability,” Waterman says. “For example, M.O.L.E. EV20 uses standard mini-connectors as opposed to proprietary thermocouple inputs, has universal USB C charging, Bluetooth wireless connectivity, an off-the-shelf battery, two-button on/off and record control, and built-in maintenance reminders. Moreover, our unique design has maintained the same thermal barrier thickness and width as MEGAM.O.L.E. 20.”
The dimensions of M.O.L.E. EV20 are notable because the thin, narrow profile allows the data logger to comply with all reflow oven clearance restrictions while allowing 20 measurements to be collected in a single run. This is not the case with all multi-input profiling options. With other profilers, the device design is very thick to accommodate high channel counts, or multiple runs must be conducted to collect the numerous readings required for densely populated, high-value PCB assemblies.
“Our engineering team thoughtfully designed M.O.L.E. EV20 with the operator’s perspective in mind,” Waterman explains. “We’re confident our newest touchscreen EV profiler ticks all the boxes.”
Share on:
Suggested Items
Connect the Dots: Proactive Controlled Impedance
05/29/2025 | Matt Stevenson -- Column: Connect the DotsFrom data centers to smartphones, designers know that the ohms have it. Getting impedance right ensures all-important signal integrity and delivers high-performing boards. Our designers understand the importance of controlled impedance, but not everyone addresses it in their designs. The most common and important controlled impedance types we see include microstrip, stripline, embedded microstrip, and differential pairs.
Trouble in Your Tank: Yield Improvement and Reliability
05/22/2025 | Michael Carano -- Column: Trouble in Your TankThere’s a simple rule of business in manufacturing: “It is all about yields.” Higher yields for your products allow for increased profits and satisfied customers. When there are lower yields, overall cost to manufacture increases, and the additional time and strain on the factory floor affect the entire operation. Lower yields are often the result of “process drift,” when critical process parameters and specialized plating additives fall outside their acceptable ranges.
Keysight Quantum Control System Embedded within Fujitsu and RIKEN’s World-Leading 256-Qubit Quantum Computer
05/16/2025 | BUSINESS WIREKeysight Technologies, Inc. announced that its Quantum Control System (QCS) has been selected as the control system embedded within Fujitsu and RIKEN’s recently developed 256-qubit quantum computer at the RIKEN RQC-FUJITSU Collaboration Center in Japan, marking a pioneering step in the industry’s pursuit of fault tolerant quantum computer.
Elementary, Mr. Watson: Design Data Packages—Circle of Concern or Circle of Influence?
05/14/2025 | John Watson -- Column: Elementary, Mr. WatsonI've often been asked, "Can you have a perfect PCB design?" At first blush, it seems like the answer should be yes. After all, if you follow all the rules, double-check your work, and use the right tools, it should be perfect. Right?
Fresh PCB Concepts: The Power of a Lunch & Learn for PCB Professionals
05/15/2025 | Team NCAB -- Column: Fresh PCB ConceptsIn the electronics industry, innovation isn’t simply a competitive edge, it’s a survival strategy. For those working in printed circuit board (PCB) design, engineering, procurement, and quality control, staying informed and connected is key to creating high-performance, cost-effective, and manufacturable products. Enter the Lunch & Learn—a simple yet highly effective format for professional development offering technical insights in short, informal sessions (served with lunch).