The Knowledge Base: A Conference for Cleaning and Coating of Mission-critical Electronics
Defense Speak Interpreted: Is DARPA Still Around After CHIPS?
Beyond the Board: Orbital High Ground—Why Space Superiority Is Slipping Away
What Do You Know About PCB Manufacturing?
January 11, 2024 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
Much of a designer’s job involves creating a product that is compatible with the capabilities of their chosen fabrication and assembly providers. But very few PCB designers have visited a board shop or assembly facility in decades, if ever, and seemingly simple DFM problems continue to dog our industry. What manufacturing concepts are designers missing?
We posed this question to Tony Bell, division manager of San Diego PCB Design, which was acquired by APCT in April 2023 and continues to operate under its original name, with plans to transition to its official new name of APCT Design. Tony has experience in PCB design, fab, assembly, and test, so we asked him what PCB designers need to know about manufacturing. He said the need for designers to continue learning about fab and assembly processes throughout their careers, and why asking questions is not bothersome, it’s necessary for the job.
Andy Shaughnessy: Tony, you have a pretty wide background in this industry. Tell me about that.
Tony Bell: I've been in this industry for a while, and am fortunate to have a diverse background that got me to where I am now. I came to San Diego PCB Design from Plexus in October 2021. At Plexus, I learned assembly process flow and I was an in-circuit test technician. Later, one thing led to another, and I moved into Plexus’ Engineering Solutions, where I managed the North American region’s PCB design team. There, 12 designers reported to me in Neenah, Wisconsin; Guadalajara, Mexico; Raleigh, North Carolina; and Boulder, Colorado. Now that San Diego PCB Design has been purchased by APCT, I’m enjoying learning more about advanced fabrication as a design manager on the fab shop side.
Shaughnessy: What do you think designers and design engineers need to know about manufacturing processes?
Bell: They need to know that the manufacturing process is ever-changing. This goes for electrical interfaces, fabrication, assembly, and test. Designing in a vacuum without a desire to learn new things can be stifling to a designer’s ability to grow in their capabilities as well as their ability to contribute to their organization.
To read this entire conversation, which appeared in the January 2024 issue of Design007 Magazine, click here.
Share on:
Suggested Items
Digital Twin Concept in Copper Electroplating Process Performance
07/11/2025 | Aga Franczak, Robrecht Belis, Elsyca N.V.PCB manufacturing involves transforming a design into a physical board while meeting specific requirements. Understanding these design specifications is crucial, as they directly impact the PCB's fabrication process, performance, and yield rate. One key design specification is copper thieving—the addition of “dummy” pads across the surface that are plated along with the features designed on the outer layers. The purpose of the process is to provide a uniform distribution of copper across the outer layers to make the plating current density and plating in the holes more uniform.
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/10/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.
Showing Some Constraint: Design007 Magazine July 2025
07/10/2025 | I-Connect007 Editorial TeamA robust design constraint strategy balances dozens of electrical and manufacturing trade-offs. This month, we focus on design constraints—the requirements, challenges, and best practices for setting up the right constraint strategy.
Elementary, Mr. Watson: Rein in Your Design Constraints
07/10/2025 | John Watson -- Column: Elementary, Mr. WatsonI remember the long hours spent at the light table, carefully laying down black tape to shape each trace, cutting and aligning pads with surgical precision on sheets of Mylar. I often went home with nicks on my fingers from the X-Acto knives and bits of tape all over me. It was as much an art form as it was an engineering task—tactile and methodical, requiring the patience of a sculptor. A lot has changed in PCB design over the years.
TTCI Joins Printed Circuit Engineering Association to Strengthen Design-to-Test Collaboration and Workforce Development
07/09/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a leading provider of electronic test and manufacturing solutions, is proud to announce its membership in the Printed Circuit Engineering Association (PCEA), further expanding the company’s efforts to support cross-functional collaboration, industry standards, and technical education in the printed circuit design and manufacturing community.