Beyond the Board: What Companies Need to Know Before Entering the MilAero PCB Market
Defense Speak Interpreted: If CHIPS Cuts Back, What Happens to Electronics Packaging Funds?
American Made Advocacy: Where’s the Budget for a Modern Military Run on Microelectronics?
FAA designates Las Vegas Area a ‘No Drone Zone’ for Super Bowl LVIII
February 6, 2024 | FAAEstimated reading time: 1 minute
Allegiant Stadium in Las Vegas is a ‘No Drone Zone’ for Super Bowl LVIII. Drones also are prohibited around several additional locations during the days leading up to the event. Drones will be restricted during the following times and days:
Game Day, Sunday, Feb. 11
- Restrictions begin at 11 a.m. PST within two nautical miles around the stadium up to 2,000 feet in altitude.
- The restrictions expand between 2:30 until 8:30 p.m. PST to a 30-nautical-mile radius and up to 18,000 feet in altitude.
Before Game Day, Feb. 5-9
- Restrictions around Allegiant Stadium on Feb.5, for one nautical mile up to an altitude of 1,000 feet from between 3 p.m. and 8 p.m.
- Restrictions around Resorts World on Feb. 8, for one nautical mile up to an altitude of 1,000 feet from between 2 p.m. and 10 p.m.
- Restrictions around Allegiant Stadium on Feb.9, for one nautical mile up to an altitude of 1,000 feet from between 11 a.m. and 2 p.m.
- Restrictions around Wynn Casino on Feb. 9, for one nautical mile up to an altitude of 1,000 feet from between 5 p.m. and 11:30 p.m.
Additional details are available in the Super Bowl LVIII Flight Advisory.
Drone operators who enter the TFRs without permission could face drone confiscation, fines that exceed $30,000 and potential criminal prosecution.
Detailed information for general aviation and drone pilots is available on the FAA’s Super Bowl LVIII webpage.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Breakthrough in Non-Contact Solder Removal Earns Kurtz Ersa 2025 Mexico Technology Award at SMTA Guadalajara
09/18/2025 | Kurtz Ersa Inc.Kurtz Ersa Inc., a leading supplier of electronics production equipment, is proud to announce that it has been awarded a 2025 Mexico Technology Award in the category of Rework & Repair for its HR 600P Automatic Rework System.
Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
09/17/2025 | Nash Bell -- Column: Knocking Down the Bone PileElectronic component salvaging is the practice of recovering high-value devices from PCBs taken from obsolete or superseded electronic products. These components can be reused in new assemblies, reducing dependence on newly purchased parts that may be costly or subject to long lead times.
On the Line With… Podcast: UHDI and RF Performance
09/17/2025 | I-Connect007I-Connect007 is excited to announce the release of a new episode in its latest On the Line with... podcast series, which shines a spotlight on one of the most important emerging innovations in electronics manufacturing: Ultra-High-Density Interconnect (UHDI).
The Marketing Minute: Cracking the Code of Technical Marketing
09/17/2025 | Brittany Martin -- Column: The Marketing MinuteMarketing is never a one-size-fits-all endeavor, but the challenges are magnified for highly technical industries like electronics. Products and processes are complex, audiences are diverse, and the stakes are high, especially when your customers are engineers, decision-makers, and global partners who depend on your expertise.
EV Group Achieves Breakthrough in Hybrid Bonding Overlay Control for Chiplet Integration
09/12/2025 | EV GroupEV Group (EVG), a leading provider of innovative process solutions and expertise serving leading-edge and future semiconductor designs and chip integration schemes, today unveiled the EVG®40 D2W—the first dedicated die-to-wafer overlay metrology platform to deliver 100 percent die overlay measurement on 300-mm wafers at high precision and speeds needed for production environments. With up to 15X higher throughput than EVG’s industry benchmark EVG®40 NT2 system designed for hybrid wafer bonding metrology, the new EVG40 D2W enables chipmakers to verify die placement accuracy and take rapid corrective action, improving process control and yield in high-volume manufacturing (HVM).