Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Punching Out: Should You Sell Your Company to a Private Equity Firm?
TANAKA Establishes Bonding Technology for High-Density Semiconductor Mounting Using AuRoFUSE Preforms
March 12, 2024 | JCN NewswireEstimated reading time: 1 minute
TANAKA Kikinzoku Kogyo K.K., which develops industrial precious metals products as one of the core companies of TANAKA Precious Metals, announced that it has established a gold particle bonding technology for high-density mounting of semiconductors using AuRoFUSE™ low-temperature fired paste for gold-to-gold bonding.
AuRoFUSE™ is a composition of submicron-sized gold particles and a solvent that creates a bonding material with low electrical resistance and high thermal conductivity to achieve metal bonding at low temperatures. Using AuRoFUSE™ preforms (dried paste forms), this technology can reach 4 μm fine-pitch mounting with 20 μm bumps. Formed through a thermocompression bonding process (20 MPa at 200°C for 10 seconds), AuRoFUSE™ preforms exhibit compression of approximately 10% in the compressive direction while showing minimal deformation in the horizontal direction. This gives them sufficient bonding strength1 for practical applications, making them suitable for use as gold bumps. With the main component being gold, which has a high level of chemical stability, AuRoFUSE™ preforms also provide excellent reliability after mounting.
This technology enables miniaturization of semiconductor wiring and greater integration (higher density) for various types of chips. It is expected to contribute to the high-level technical innovation required of advanced technologies, including optical devices such as light-emitting diodes (LEDs) and semiconductor lasers (LDs), and use in digital devices such as personal computers, smartphones, and in-vehicle components.
TANAKA will actively distribute samples of this technology in the future to promote greater awareness in the marketplace.
Share on:
Suggested Items
Würth Elektronik Expands Its FPC Connector Family
10/30/2024 | Würth ElektronikThe selection of connectors for flat flexible cables (FFC) and flexible printed circuits (FPC) from Würth Elektronik is getting even larger.
Exploring Advanced PCB Final Finishing: DIG, RAIG Technologies
10/24/2024 | Rich DePoto, UyemuraIn this interview, Rich DePoto of Uyemura provides a deep overview and explanation of Reduction-assisted Immersion Gold (RAIG) and direct immersion gold (DIG) technology, and their applications and benefits when compared to traditional final finishes. He delves into the intricacies of electroless nickel corrosion and “black pad,” exploring its causes, consequences, and the measures that can be taken to mitigate this problem. This comprehensive overview will provide insight toward sound decision-making for those operating in environments where perfect process control is a challenge.
Surface Finish: Tune in to the Latest Podcast Episode of On the Line with… ASC Sunstone
09/04/2024 | I-Connect007Don't miss the latest episode of "On the Line with… ASC Sunstone: Designing for Reality," in which ASC Sunstone’s General Manager, Matt Stevenson, discusses the critical topic of surface finishes in PCB manufacturing.
Royal Mint Launches Gold Recovery Factory from E-Waste
08/08/2024 | Royal MintA pioneering new factory that provides a more sustainable source of gold and reduces reliance on mining has been unveiled by The Royal Mint.
Rocket Lab Completes Integration and Testing of Twin Spacecraft for NASA Mars Mission
07/30/2024 | BUSINESS WIRERocket Lab USA, Inc., a global leader in launch services and space systems, has completed integration and testing of two spacecraft destined for Mars orbit.