Intel Takes Next Step Toward Building Scalable Silicon-Based Quantum Processors
May 2, 2024 | BUSINESS WIREEstimated reading time: 1 minute

Nature published an Intel research paper, “Probing single electrons across 300-mm spin qubit wafers,” demonstrating state-of-the-art uniformity, fidelity and measurement statistics of spin qubits. The industry-leading research opens the door for the mass production and continued scaling of silicon-based quantum processors, all of which are requirements for building a fault-tolerant quantum computer.
Quantum hardware researchers from Intel developed a 300-millimeter cryogenic probing process to collect high-volume data on the performance of spin qubit devices across whole wafers using complementary metal oxide semiconductor (CMOS) manufacturing techniques.
The improvements to qubit device yield combined with the high-throughput testing process enabled researchers to obtain significantly more data to analyze uniformity, an important step needed to scale up quantum computers. Researchers also found that single-electron devices from these wafers perform well when operated as spin qubits, achieving 99.9% gate fidelity. This fidelity is the highest reported for qubits made with all-CMOS-industry manufacturing.
The small size of spin qubits, measuring about 100 nanometers across, makes them denser than other qubit types (e.g., superconducting), enabling more complex quantum computers to be made on a single chip of the same size. The fabrication approach was conducted using extreme ultraviolet (EUV) lithography, which allowed Intel to achieve these tight dimensions while also manufacturing in high volume.
Realizing fault-tolerant quantum computers with millions of uniform qubits will require highly reliable fabrication processes. Drawing upon its legacy in transistor manufacturing expertise, Intel is at the forefront of creating silicon spin qubits similar to transistors by leveraging its cutting-edge 300-millimeter CMOS manufacturing techniques, which routinely produce billions of transistors per chip.
Building on these findings, Intel plans to continue to make advances in using these techniques to add more interconnect layers to fabricate 2D arrays with increased qubit count and connectivity, as well as demonstrating high-fidelity two-qubit gates on its industry manufacturing process. However, the main priority will continue to be scaling quantum devices and improving performance with its next generation quantum chip.
Suggested Items
TRI Test Solutions at INNOELECTRO 2025
04/02/2025 | TRIAnytest will join INNOELECTRO 2025, held at BOK Sportcsarnok from April 8 – 10, 2025, to showcase TRI's Test Solution.
IPC APEX EXPO 2025 Review: Shifting My Focus to the Show Floor
04/02/2025 | John Watson, CIDIPC APEX EXPO 2025 marked a significant milestone as it celebrated its 25th anniversary. (Personally, I don’t think it looked a day over 20.) If you didn’t attend this great event, why not? This was my 10th anniversary of attending, and it had a distinctly different feel. There was a celebratory atmosphere as both veterans, like myself, and first-time attendees, were drawn into a celebratory occasion marking the significant milestone of the 25th anniversary.
European Chips Skills Academy Launches ECS Summer School 2025 to Inspire Future Electronics Talent
04/01/2025 | JCN NewswireThe European Chips Skills Academy (ECSA), an EU-funded project coordinated by SEMI Europe, in collaboration with industry partners AENEAS, EPoSS, and INSIDE, has announced the launch of the ECS Summer School 2025.
Real Time with... IPC APEX EXPO 2025: Highlighting Global PCB Trends and Technologies with all4-PCB
04/01/2025 | Real Time with...IPC APEX EXPOAndy Shaughnessy and all4-PCB's Ralph Jacobo discuss global distribution trends in the PCB industry, focusing on new technologies in plasma etching and final inspection. Ralph highlights the importance of IC substrate buildup technology and partnerships in the market.
Do You Have X-ray Vision? SMT007 Magazine April Issue Is No Joke
04/01/2025 | I-Connect007 Editorial TeamAs component packaging continues to evolve, the capability of inspecting through components is crucial. Has X-ray’s time finally come in electronics manufacturing? Join us in this issue of SMT007 Magazine, where we answer this question—and others—to bring more efficiency to your bottom line.