Nolan’s Notes: Is Mexico the Pulse of Electronics in the Americas?
Standard of Excellence: Speed vs. Quality in Customer Service
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
The Thrill of Victory: IPC Design Competition
May 23, 2024 | Michelle Te, I-Connect007Estimated reading time: 3 minutes
The final heat of the 2024 IPC Design Competition took place on Tuesday, April 9, during IPC APEX EXPO. IPC’s Kris Moyer and Patrick Crawford served as judges and onsite supervisors for the event, which featured five competitors—four online and one live at IPC APEX EXPO. The grand prize winner was Dinesh G., followed by Paul Brionez in second place (he placed third last year), Ajeesh Francis in third, and runners-up Joseph Chiu and Harish G (last year’s champion).
I met with Kris and Patrick during the final heat of the design competition and asked them to walk me through what was happening, what they look for as judges, and how the event has evolved since its inception in 2022.
Michelle Te: Kris, tell me about the design competition that’s taking place today. What are the contestants doing right now?
Kris Moyer: Today is the final heat of the IPC Design Competition. We have a total of five competitors here: two finalists from IPC India's design competition, as well as the three finalists from IPC USA's preliminaries, which began in January.
This year, we gave them a fully finished schematic design, which in this case is like one of those dancing light boxes that dances to the music of your voice. It has a microphone amplifier, a microphone input stage, an amplifier stage, and a bunch of LEDs and clock driver stages. I have a similar string of LED lights around my place that can change with the music and dance and give me some mood lighting or change colors if I want.
This is something that you could put in a lightbox on your wall, and you would see changes in the color LEDs as they change with the music. This year, we did something unique: We decided to make it our IPC logo in the shape of the board, so you can see all the cutouts.
So, rather than one solid, rectangular board shape, we actually have the logo and the various parts of our letters all cut out. That makes it a very challenging shape to work with. It’s difficult for the contestants to get all the parts physically placed and complete all the routing. There are many narrow channels, and a very thin gap to get a signal from point A to point B. Also, being a somewhat rounded shape means we can't use the standard placement—placing components in a nice, rectangular grid. They have to use different rotation angles.
Te: What’s the judging process?
Moyer: As soon as they're done, they will submit their projects to Patrick. Once we have all five projects, Patrick, me, and the other judges will all meet in the same room, and we'll just go through our rubric right there on the spot. We should know by the end of the day today who the winner is, and then on Thursday, we’ll make the announcement.
Te: What do they get for winning in addition to bragging rights?
Patrick Crawford: There is a cash prize associated with winning. Design007 Magazine usually has coverage of the winners, and every contestant gets a shout-out. The IPC Design Competition is a great way to get your name out in front of the industry.
Te: They get their name in lights, and it’s always good to have your name known in the industry.
Crawford: Sure, it’s definitely a résumé-enhancer, especially if you’re one of the winners.
To read this entire conversation, which appeared in the 2024 issue of Show & Tell Magazine, click here.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Life Is a Highway: A Family of 8 Turned the Entire U.S. Into a Learning and Working Environment
11/04/2025 | Steven Bowles, Lockheed MartinIt’s 6:45 a.m. in a modern A-frame cabin tucked into the misty edges of the Cascade Range in Arlington, Washington. I’ve just made a quick Nespresso, checked my calendar of virtual meetings, and verified the Airbnb’s Wi-Fi speed is holding steady. In the next room, my wife Lynsey corrals our six kids into breakfast while planning a day trip to Seattle’s Children’s Museum. By 7:30, I’m camera-ready in a makeshift office nook, leading a discussion on HDI PCB design for an IPC standards committee. After a busy day, our Bowles crew, ranging in age from 1 to 10 years old, is hands-on with activities and exhibits in the museum.
TTM Technologies Receives Two Awards from the Global Electronics Association at the 2025 IPC CEMAC Conference
11/03/2025 | Globe NewswireTTM Technologies, Inc. announced that two of its team members received prestigious Asia Steering Committee Outstanding Service Awards from the Global Electronics Association (formerly named IPC connecting global electronics industry) at the 2025 IPC CEMAC Electronics Manufacturing Annual Conference in Shanghai.
TTCI Brings Hands-On Test Engineering and IPC Training Expertise to PCB Carolina 2025
10/31/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a trusted provider of electronic test and manufacturing solutions, and The Training Connection LLC (TTC-LLC) will exhibit at PCB Carolina on Wednesday, November 12, 2025, at the McKimmon Center at NC State University in Raleigh, North Carolina. Attendees can visit Table 4 to say hello to Bert Horner and Bill Graver, and learn more about their test engineering services and technical training programs.
The Training Connection Continues to Grow with Addition of Veteran IPC Trainer Bill Graver
10/30/2025 | The Training Connection LLCThe Training Connection, LLC (TTC-LLC), a premier provider of test engineering and development training, is proud to announce the addition of Bill Graver to its growing team of industry experts. A respected professional with more than 35 years in electronics manufacturing, Bill joins as an IPC Master Trainer, bringing a wealth of hands-on experience in PCB testing, failure analysis, and process improvement.
Electronics Industry Warns Mexico Tariffs Could Undercut U.S. Manufacturing and Supply Chain Resilience
10/24/2025 | Global Electronics AssociationAs negotiations over U.S.–Mexico trade policies near an October 29 deadline, the Global Electronics Association released a new policy brief, From Risk to Resilience: Why Mexico Matters to U.S. Manufacturing.