-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueSolder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
A Culture of Thriving
One cannot simply command thriving; it must be nurtured, developed, and encouraged. In this issue, we explore strategies to improve your working relationship model—both internally and externally. In this culture of thriving, your business will grow in the process.
Certifications
Certifications have historically been seen as a cost of doing business, but how do we turn them into a positive ROI and a value to both customer and vendor?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Underconstraining Your Materials? Leave It to the Experts
May 30, 2024 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
With traditional laminates now sporting improved resin systems, some OEMs are choosing various flavors of FR-4 instead of high-speed laminates for their high-speed designs—even RF applications. Avoiding overconstraining your materials in high-speed products can lead to considerable cost savings, not to mention a more streamlined trip through fabrication.
But what do designers and design engineers need to know before they start using traditional PCB laminates for RF applications? Raytheon’s Filbert Arzola is a principal electrical engineer, IPC instructor, and a big advocate of setting constraints correctly early in the design cycle. We caught up with him at IPC APEX EXPO when his Professional Development Course on constraints was taking a lunch break.
Andy Shaughnessy: It seemed fitting to talk with you here in Anaheim during your class on constraining your high-speed board correctly. Tell us a little about the class.
Filbert Arzola: Sure. One of the things we've learned is that some high-speed designers have, in the past, put too much focus on materials that had a certain glass weave. We went through so much waste trying to use glass weave at a certain angle. We had so much trouble getting a board done that we've gone to other material types, adding dielectric to them just to make things work better. I learned there are certain kinds of material and FR-4 materials, including one that, even though it's not the best, still gives a good end-product. The end product is what matters.
Kelly Dack: There's no question that consistency in materials, manufacturing, and performance is key. What are the elements of consistency in your opinion?
Arzola: You need to even be able to get the materials, and not just on time. Let's say you call a vendor and say, “I'm going to build these boards six months from now; can you make sure the material is there?” They'll say, “Sure, material availability is okay.” Then they go out and buy the material. But now, six months later, the material may be outdated with respect to the requirements we want to meet, and we can't use that material. So, that's a big deal.
To read this entire conversation, which appeared in the May 2024 issue of Design007 Magazine, click here.
Suggested Items
iNEMI Packaging Tech Topic Webinar: Packaging Interconnect Material Technology Series
09/19/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) continues its Packaging Interconnect Material Technology Series with a webinar on Transient Liquid Phase (TLP) Bonding for High-Temperature Soldering Processes.
Fresh PCB Concepts: The Journey of a PCB—A Tale of Sustainability and Circularity
09/18/2024 | Team NCAB -- Column: Fresh PCB ConceptsImagine a bustling factory floor where hundreds of PCBs hum with potential, each one destined to be the brain of a new electronic device. From the sleek smartphone in your pocket to the intricate systems in electric vehicles, PCBs are the unsung heroes of our digital world. But have you ever wondered what happens to these tiny powerhouses when their work is done? The journey of a PCB doesn’t end when a device reaches the end of its life. In fact, that’s where the next chapter begins—a chapter that’s critical for our environment and our future.
Creative Materials, Unveils Economical Conductive Ink and High Dielectric Strength Ink for Advanced Electronic Applications
09/11/2024 | Creative Materials, Inc.Creative Materials Inc., an innovator of materials for the electronics industry, is pleased to announce the launch of two new high performance ink products:
Smartkem, Chip Foundation Partner on MicroLED Backlight Tech
09/10/2024 | PRNewswireSmartkem, a company that has the potential to power the next generation of displays using its disruptive organic thin-film transistors (OTFTs), announced that it has entered into a joint development agreement with Shanghai Chip Foundation Semiconductor Technology Co., Ltd., a manufacturer of semiconductor and integrated circuit devices, to co-develop a new generation of microLED-based backlight technology for Liquid Crystal Displays.
A Parametric Approach to the Environmental Impact of PCB Fabrication
09/09/2024 | Maarten Cauwe, imecSustainability for electronics is receiving more attention due to environmental concerns, regulatory obligations, and to ensure competitiveness in a growing market for sustainable products. To facilitate the discussion on the environmental impact of electronics, there is a strong need for data on energy use, carbon footprint, greenhouse gas (GHG) emissions, hazardous chemicals used during manufacturing, waste generation, etc.