Aismalibar to Attend PCIM 2024
June 5, 2024 | AismalibarEstimated reading time: 1 minute
Aismalibar will be attending PCIM 2024 in Nuremberg, Germany from June 11th to 13th, presenting new cooling technologies for power electronics, specifically Thermal Interface Materials (TIMs) and Insulated Metal Substrates (IMS). PCIM is the leading international exhibition and conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. The exhibition and conference are the international meeting point for the industry. Aismalibar will exhibit in booth 449 Hall 9 of the Nuremberg Exhibition Grounds.
Aismalibar Thermal Interface Materials have been designed to improve dielectric isolation and fast thermal transmission in power electronics and battery packs among others, taking into consideration cost reduction, lifetime performance, safety, and reliability.
Thermal Interface Materials are divided into two main areas, differentiated based on whether they need dielectric capacity. The dielectric requirement is determined by the electronic device, its operating voltage, and the applicable regulations regarding ground insulation. Additionally, Aismalibar has developed a series of applicable surfaces on the TIMs, differentiated by whether they need to be self-adhesive. Both surfaces serve, in turn, to reduce the air cavities that exist between the surfaces of the TIMs and the heatsinks or electronic components.
Aismalibar has a wide range of thermal management solutions, but this year it will focus on presenting the following new products:
- The BOND SHEET CURED GLASS FREE is used for Thermal Interface material in power electronics and battery isolation with 3,2w/mK and 4 to 6Kv dielectric strength.
- Thermal FR4 used in PCB manufacturing to improve thermal management and reduce thermal vias. The use of the Aismalibar thermal FR4 can reduce a 15% d the operating temperature of power components by improving the output or extending the life of the component.
- Insulated Metal Substrate COBRITHERM ULTRATHIN 5W and 8W used in high-end power AC/DC converters and high-power LED industry.
- And COBRITHERM ALP, made from an Aluminium base coated with a 100-micron dielectric ceramic layer with extra low thermal resistance and high dielectric strength up to 6KV. It is ideal for building battery housing, covers, partitions or radiators, power electronics and comfortable heat sinks, among other solutions. It is completely insulated and guarantees excellent contact between the battery and dissipation elements.
Suggested Items
Jabil Acquires Mikros Technologies
10/03/2024 | BUSINESS WIREJabil Inc., a global leader in design, manufacturing, and supply chain solutions, announced the successful acquisition of Mikros Technologies LLC, a leader in the engineering and manufacturing of liquid cooling solutions for thermal management, completed October 1.
Indium to Showcase Industry-Leading Solder Paste and Alloy Technology at Detroit Battery Show
10/01/2024 | Indium CorporationAs one of the leading materials providers to the electronics assembly industry, Indium Corporation® is proud to feature its industry-leading Durafuse® solder technology at the Battery Show North America, October 7-10, in Detroit, Michigan.
Trouble in Your Tank: Interconnect Defect—The Three Degrees of Separation
10/01/2024 | Michael Carano -- Column: Trouble in Your TankIt has been well documented that, with a very expensive and complex printed circuit board, thermal and mechanical excursions often find weaknesses. A lack of robustness and poor process control often leads to the exploitation of those weaknesses. An interconnect defect (ICD) often goes undetected until the printed circuit board reaches the final assembly stage or undergoes multiple thermal cycles, including interconnect stress tests or thermal shock. It is impossible to rework the ICD defect. But unlike voids, if detected in time, the panels can be reprocessed.
Rheinmetall, Honeywell Ink MoU to Develop New Technology
09/30/2024 | RheinmetallDüsseldorf-based technology group Rheinmetall and the U.S. industrials company Honeywell have signed a memorandum of understanding (MoU) to establish strategic cooperation in various fields of technology.
Aismalibar to Showcase Thermal Management Solutions for EV Battery Systems at The Battery Show North America 2024
09/27/2024 | AismalibarAismalibar, a leader in innovative thermal management materials, will be presenting its newest solutions for electric vehicle (EV) battery systems at The Battery Show North America from October 7-11, 2024. Located at Huntington Place, Detroit, MI, Aismalibar will exhibit at booth 6231, unveiling a range of cutting-edge Thermal Interface Materials (TIMs) designed to improve the safety, performance, and longevity of EV batteries.