-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueWet Process Control
In this issue, we examine wet processes and how to obtain a better degree of control that allows usable data to guide our decisions and produce consistently higher-quality products.
Don’t Just Survive, Thrive
If we are to be relevant and prosper during these next critical decades in electronics, we must do more than survive. As an industry, we can and must thrive. In this issue, our contributors explore these concepts meant to help you take your business to the next level.
Material Matters
Materials management is nuanced, multifaceted, and requires a holistic systems approach for business success. When building high mix, low volume, and high technology, managing materials and overall cost containment are even greater challenges.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Don’t Overconstrain Your Board Materials
July 2, 2024 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
![](https://iconnect007.com/application/files/7817/1649/2873/kris_moyer_300.jpg)
When we started planning this month’s issue, which centers on the use of traditional laminates in certain high-frequency PCBs, we knew we had to interview Kris Moyer and Ed Kelley together. Kris teaches advanced PCB design classes for IPC, and Ed is the former CTO of Isola and founder of Four Peaks Innovation.
What ensued was a wide-ranging discussion on the evolution of “standard” PCB laminates and the recent trend by some OEMs to use these materials in high-frequency and even RF boards. If you’re interested in avoiding the use of expensive, hard-to-manufacture specialty laminates for your high-frequency boards, you won’t want to miss this.
Andy Shaughnessy: Kris, in previous discussions, you said that some designers are now using standard materials for some high-speed designs, and even RF boards. Notice that I’m trying to avoid saying “FR-4.” What do designers need to know if they are designing a high-speed RF board and are considering using a standard laminate instead of laminates designed for higher speeds?
Kris Moyer: The two big things, whether you're coming from the engineering side or the designer side, are awareness of Dk (relative permittivity), and Df (dissipation factor). We talk about Dk and Df all the time in my classes. The classic FR-4 is not a genuine spec; FR-4 is just a flame-resistance rating for this flame-retardant material. But we are talking about epoxy resins and woven glass-reinforced bases, which is what everybody assumes they're getting when they say “FR-4.”
Historically, we would have Dk in that segment on the order of 4 to 4.5. The Df is on the order of 0.015. They are pretty lossy materials, which was fine for analog and in the early days of digital. But the formulations of the resins have continued to get better. We're now seeing epoxy-based resins that have a Dk down in the 3.2 to 3.3 range. Df is still not there yet, but it’s getting better. Even at a Dk of 3.5, an epoxy base doesn't have all the processing limitations of PTFE. There is a big segment of consumer-grade products that we don’t call RF, such as Wi-Fi, Bluetooth, and ZigBee. Those product lines are in the beginning, lower-frequency spectrum of RF, and we can absolutely use these FR-4 products to build those.
Now, if we're not trying to get super low loss, we still have to worry about insertion loss issues. If we don't have an insertion loss issue and we are just in the higher frequency range, then absolutely we can get the required performance out of the dielectrics in the more traditional epoxy-based resins. Another thing designers need to know about are the improvements in standard epoxy or acrylic or polyimide-based resins as we move on the spectrum toward full RF.
To read this entire article, which appeared in the May 2024 issue of Design007 Magazine, click here.
Suggested Items
StratEdge Brings Gold Medal Performance with its Molded Ceramic and Post-fired Ceramic Packages, and High-reliability Assembly Services
08/14/2024 | StratEdgeStratEdge Corporation is redefining the landscape of semiconductor packaging with its cutting-edge molded and post-fired ceramic packages, supported by industry-leading high-reliability assembly services.
UHDI Fundamentals: UHDI for RF Microwave Applications
07/16/2024 | Anaya Vardya, American Standard CircuitsUltra high-density interconnect (UHDI) technology has significant potential for RF (radio frequency) microwave applications. Its advantages lie in its ability to provide high-density routing and integration, which are crucial for complex RF circuits. Here are three key UHDI benefits in RF microwave applications:
Everyday Life, Improved by Light: GRYPHON’s Photonic Discoveries
07/11/2024 | DARPARadio frequency (RF) and microwave signals are integral carriers of information for technology that enriches our everyday life – cellular communication, automotive radar sensors, and GPS navigation, among others
Traditional Materials, High-Frequency Boards?
06/18/2024 | I-Connect007 Editorial TeamNot long ago, high-frequency and RF boards required specialized laminates, which tend to be costly and difficult to manufacture. But now, high-frequency designers use traditional PCB laminates for certain high-frequency boards. How is this possible? For some insight, we asked Ed Kelley, founder of Four Peaks Innovation and former CTO of Isola, to discuss how traditional materials have improved and what this means to PCB designers and design engineers today.
TTM Technologies Unveils New Xinger High-Performance 50W (AVG) Couplers
05/30/2024 | Globe NewswireTTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies and printed circuit boards (PCBs) has announced the launch of its 5mm x 3.2mm X-Band 8-12 GHz 3dB hybrid coupler and 20dB directional coupler.