Happy’s Tech Talk #32: Three Simple Ways to Manage and Control Wet Processes
It’s Only Common Sense: Selling With Confidence
The New Chapter: The Impact of Parasitics on PCB DesignNew Breakthrough in Double-Sided Reflow Part Retention from Alltemated
July 19, 2024 | AlltematedEstimated reading time: 1 minute
Alltemated's PLACE-N-BOND™ underfilm passed testing and was implemented in volume production to aid in component retention during the second pass reflow of printed circuit assemblies. This successful testing and implementation occurred in various applications with components such as capacitors, inductors, transformers, connectors, and larger ICs.
Softened bottom-side solder joints can be insufficient for retaining parts. Dispensed bonding done before second side reflow requires additional equipment or secondary processes. Packaged in tape and reel, the underfilm gets picked and placed along with the other components prior to reflow. PLACE-N-BOND™ reels are mounted on SMT feeders, and implementation was easily accomplished without dispensers or secondary processes.
Responding to the growing demand for PLACE-N-BOND™ in component retention, Alltemated Inc. invested in new in-house testing capabilities to support application development. With the addition of a reflow oven, Alltemated simulates an application’s double-sided reflow to validate retention prior to recommending the correct underfilm material, size, and thickness.
PLACE-N-BOND™ continues to be utilized in numerous devices worldwide. This innovative solution not only helps components hold on during second reflow but also adds solder joint strain relief and mechanical strength to the component after assembly. Originally developed for BGA solder ball/joint reliability, the number of applications utilizing underfilm in double-sided reflow part retention has increased 4X over the past year.
For more information on double-sided reflow retention and solder joint reliability of printed circuit assemblies visit the Alltemated website.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics, Chapter 3
08/14/2024 | I-Connect007 Editorial TeamChapter 3 of this book delves into the critical aspects of the SMT process, focusing on the reflow oven and automated optical inspection (AOI) machine. Highlighted are the key roles of the line operator, manufacturing engineer, and quality manager in maintaining efficient operations and high-quality PCBAs.
Solderstar to Present Advanced Reflow Profiling Solution at SMTA International 2024
08/08/2024 | SolderStarSolderstar, a leader in innovative profiling solutions for the electronics manufacturing industry, is exhibiting at the SMTA International 2024 conference in Rosemont, Illinois, booth 2838, from October 22-24.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
07/26/2024 | Nolan Johnson, I-Connect007This week, I’ve been attending Thailand Electronic Circuits Asia 2024. This is the inaugural event, hosted by Thailand Printed Circuit Association (THPCA) in collaboration with the Hong Kong Printed Circuit Association (HKPCA). Thailand has supported a PCB industry for some time—mostly automotive applications—but the China Plus One dynamic has definitely taken root here.
Indium Corporation’s New Type 6 Jetting Solder Paste Hits Market
06/26/2024 | Indium CorporationIndium Corporation® is pleased to introduce a new jetting solder paste to join its PicoShot® series of products. PicoShot® NC-6M is a no-clean, halogen-free, Type 6 powder-size material specifically formulated to be compatible with Mycronic jetting systems and Mycronic’s “small dot” ejector.
High Temperature Component Warpage as a Function of Moisture Sensitivity (MSL) Rating
05/29/2024 | Neil Hubble, AkrometrixMoisture sensitivity requirements for non-hermetic surface mount devices are defined in the joint IPC/JEDEC standard J-STD-020E, “Joint IPC/JEDEC Standard for Moisture/Reflow Sensitivity Classification for Non-hermetic Surface-Mount Devices,” last updated in December 2014. This standard allows customers and suppliers to place electronics devices into specific categories, defined into 8 different moisture sensitivity levels (MSL). Test method criteria are defined within this standard to define MSL levels for different packages. A subsection of MSLs are shown in Figure 1 below, showing the MSL 3 and 4 used in this study.