-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueInner Layer Precision & Yields
In this issue, we examine the critical nature of building precisions into your inner layers and assessing their pass/fail status as early as possible. Whether it’s using automation to cut down on handling issues, identifying defects earlier, or replacing an old line...
Engineering Economics
The real cost to manufacture a PCB encompasses everything that goes into making the product: the materials and other value-added supplies, machine and personnel costs, and most importantly, your quality. A hard look at real costs seems wholly appropriate.
Alternate Metallization Processes
Traditional electroless copper and electroless copper immersion gold have been primary PCB plating methods for decades. But alternative plating metals and processes have been introduced over the past few years as miniaturization and advanced packaging continue to develop.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
Automatic Paste Transfer and Quick Change Squeegee for ASMPT Printers
July 23, 2024 | ASMPTEstimated reading time: 2 minutes
ASMPT, the market and innovation leader in SMT manufacturing technology, has added two new features to its proven DEK printing platforms that automate solder paste transfers and simplify squeegee changes.
ASMPT covers almost the entire SMT manufacturing process with its extensive product portfolio and is continuously working to further automate and simplify the various workflows. “Solder paste printing, which is already the most error-prone process in SMT production, still has many steps that must be done by hand,” explains Rick Goldsmith, Director Product Management at ASMPT. “Finding suitable people for these activities is becoming increasingly difficult, which is why our customers are asking for solutions that reduce personnel and material costs as well as error rates.”
Paste transfer
When the printer setup needs to be changed, the solder paste that remains on the old stencil needs to be transferred to the new one. “Until now, this was done manually with a spatula,” explains Goldsmith. “In most cases, some of the paste remained on the old stencil and was not fully transferred to the new one. In addition, there was always the risk that the paste would get contaminated or wind up in the wrong place, leading to short circuits and malfunctions.”
The new paste transfer unit for the DEK TQ simplifies this process. The paste gets transferred automatically during each stencil change, provided the process parameters permit this. To do this, the squeegee pushes the paste to a transfer unit, from which it gets applied to the new stencil. Next, the system uses the understencil cleaning system to clean off any paste residue.
“This fully automatic paste transfer relieves the already scarce operators,” says Goldsmith. “It works faster, more precisely and more efficiently than would be possible by hand. With the manual process, up to 10 percent of the paste remains on the stencil. Our automated paste transfer system reduces this to 5 percent. This will represent a significant cost saving in solder paste, reducing manufacturing cost per PCB.” The new paste transfer system can be easily installed on all DEK TQ-series solder paste printers.
Quick Change Squeegee
ASMPT has also improved the squeegee changeover process on its solder paste printers. “Previously, the squeegee was affixed with two thumbscrews,” explains Goldsmith. “To change the squeegee, the operator had to loosen and then tighten them again – a time-consuming process that often caused problems, for example, when someone tightened the thumbscrews too firmly and another operator was unable to loosen them. The time factor was also significant, because 20 changeovers over a 24-hour period are not uncommon.”
A new holder makes these changeovers much easier because the squeegee is automatically unlocked when it is removed out of the machine. It can then be switched out in a single step before the bracket locks automatically as the squeegee is retracted. This reduces the changeover time by up to 50 percent. In addition, a mechanical coding system prevents the incorrect insertion of squeegees. Quick Change Squeegee can be retrofitted in a few hours and is available for both the DEK TQ and the NeoHorizon platforms.
“Competition is getting tougher all the time in SMT manufacturing,” says Goldsmith. “To be successful in this field, you must continuously automate and streamline your operations. At ASMPT, we understand the challenges SMT manufacturers face and are able to offer our customers interesting solutions that provide them with tangible competitive advantages.”
Suggested Items
Indium to Showcase Power Electronics Products at NEPCON Japan
01/14/2025 | Indium CorporationAs one of the leading materials providers in the electronics assembly industry, Indium Corporation® is proud to feature its lineup of high-reliability products for power electronics at NEPCON Japan, taking place January 22-24, in Tokyo, Japan.
ASMPT: Innovative Bonding for Power Electronics
12/09/2024 | ASMPTASMPT presents with its SilverSAM™ SilverSAM machine a highlight for makers of modern power electronics: an innovative and versatile silver sintering machine that meets the great demands on bonding, which is particularly critical in the field of electromobility. SilverSAM sets new standards in interconnect technology for power electronics, particularly in the rapidly growing electric vehicle market.
Yamaha Robotics Brings Inspection Innovations for Growing Markets to electronica 2024
11/19/2024 | Yamaha Robotics SMT SectionYamaha Robotics SMT section presented innovations in high-speed surface-mount inspection at electronica 2024, demonstrating the latest AI skills and special features for applications including LED lighting, e-mobility, and mechatronics.
Data-driven Precision in PCBA Manufacturing
11/13/2024 | Julie Cliche-Dubois, CogiscanThe intricacies involved in electronics manufacturing require more than just expensive equipment and skilled technicians; they necessitate an accurate understanding of the entire production flow, informed and driven by access and visibility to reliable data.
All Flex Solutions Invests in Assembly Inspection Automation
10/17/2024 | All Flex SolutionsAll Flex has acquired an Omron VP9000 3D Solder Paste Inspection System and an Omron VT-S1080 3D Automatic Optical Inspection System for their flexible circuit assembly facility in Bloomington, Minnesota. These acquisitions are one part of All Flex Solutions’ four-year SMT Roadmap to expand the scale and capability of their assembly operations.