It’s Only Common Sense: What To Do When They Won’t Answer the Phone
Dan’s Biz Bookshelf: ‘Costovation: Innovation That Gives Your Customers Exactly What They Want—And Nothing More’
The Right Approach: ‘Twas the Night Before Christmas (Harley-style)
Latest Advancements in High-Reliability Electronics Focus of 2024 IPC High Reliability Forum
August 12, 2024 | IPCEstimated reading time: 1 minute
Ensuring reliability in high-voltage electronics, a new standardized test method for abrasion resistance of e-textiles, and assembly and solder joint X-ray challenges are just a few of technical conference topics offered at IPC’s High Reliability Forum, October 9-10 at the McKimmon Center in Raleigh, N.C.
Additional presentation topics cover: safety critical electronics considerations; military, aerospace, medical, automotive, e-Mobility and other applications with specialized reliability requirements; and industry-curated content covering many different topics related to high reliability issues in PCB design, PCB fabrication materials, PCB assembly, PCBA surface reliability, emerging electronic technologies, mitigation strategies and test methods.
Speakers from the following companies include Denis Barbini, Ph.D., Zestron; Steven Dirkes, U.S. Army; Ben Gumpert, Lockheed Martin; Norbert Holle, Ph.D., Robert Bosch GmbH; Takenori Kakutani, Taiyo Ink Manufacturing; Tony Lentz, FCT Assembly; Bob Neves, Microtek Laboratories & Reliability Assessment Solutions; Tim Pearson, Collins Aerospace; Erin Tillery, NC State University; and Udo Welzel, Ph.D., Robert Bosch GmbH.
“The event provides a unique opportunity for those in industry who design, manufacture, or test electronics for critical applications with unique safety, reliability, and lifetime requirements to obtain the latest research on high-reliability electronics,” said Teresa Rowe, IPC senior director, assembly and standards technology. “This year, attendees will learn about the newest research and emerging trends in high-reliability electronics, hear from subject matter experts, connect with exhibitors and peers, and take advantage of several networking opportunities during the course of the two-day forum.”
IPC High Reliability Forum will be co-located with IPC Builds which is being held October 5-10, 2024, at the McKimmon Center. IPC Builds focuses on IPC standards development committee meetings and encourages industry’s contribution to the standards and guidelines that companies and their customers, suppliers, and competitors rely on. Separate registration is required.
For more information on the IPC High Reliability Forum including agenda, speaker profiles, exhibition and sponsorship information, or to register for event, visit www.ipc.org/event/high-reliability-forum.
Share on:
Suggested Items
The Effects of Copper on a Transmission Line
12/23/2024 | Todd Kolmodin, Gardien ServicesAs technology advances, our substrates become increasingly smaller, and chip technology has progressed to where HDI and UHDI are household terms. Ten years ago, this new design architecture would strike fear in the hearts of any plating engineer. Unfortunately, North American and European manufacturing has lagged due to excessive offshoring of commercial and some high-reliability product lines. Fortunately, most of the military and aerospace product has remained controlled. But in doing so, the designs utilized by the mil/aero and medical sectors’ reliability lines were corralled into the manufacturing capabilities of the North American and European providers.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
The Knowledge Base: The Era of Advanced Packaging
12/23/2024 | Mike Konrad -- Column: The Knowledge BaseThe semiconductor industry is at a pivotal juncture. As the traditional scaling predicted by Moore's Law encounters significant physical and economic barriers, transistor density can no longer double every two years without escalating costs and complications. As a result, the industry is shifting its focus from chip-level advancements to innovative packaging and substrate technologies. I Invited Dr. Nava Shpaisman, strategic collaboration manager at KLA, to provide some insight.
HyRel Announces Sale of First Versacell Robotic System to Leading Defense Contractor
12/03/2024 | HyRelHyRel Technologies, a global provider of quick-turn semiconductor modification solutions, is proud to announce the sale of its first Versacell Robotic Solder Dip & BGA Reballing System to one of the top five defense contractors. Originally developed for internal use, the revolutionary Versacell System drew the attention of the contractor, who recognized its impressive precision, accuracy, and efficiency.
GEN3 Announces Exclusive UK Distribution Partnership with RAS for HATS2 Test System
11/19/2024 | Gen3GEN3, a leading British manufacturer of specialised test, measurement & production equipment for the electronics industry, is pleased to announce its partnership with Reliability Assessment Solutions Inc. (RAS), a leader in advanced reliability testing solutions.