It’s Only Common Sense: Making 2025 the Best Sales Year Ever
Dan’s Biz Bookshelf: ‘Citizen Marketers: When People Are the Message’
The Right Approach: ‘Twas the Night Before Christmas (Harley-style)
IPC’s Road to Reliability Webinar Series Covers New e-Mobility Technologies
August 28, 2024 | IPCEstimated reading time: 1 minute
Starting September 12, IPC’s Road to Reliability Webinar series will bring industry leaders together to discuss the hurdles in achieving reliability for new e-mobility technology. Speakers will examine reliability drivers, technology applications, and target lifecycles in each free webinar.
- On September 12, 10 am CDT, Habib Mustain, Hereaus, will discuss power electronic substrate types, requirements, and challenges for today's EV applications and will address essential topics related to the use of power substrates in power electronic applications with an emphasis on EVs. Stan Rak, SF Rak Company, will serve as webinar moderator. Learn more and register.
- On October 17, 10 am CDT, Brian O'Leary, Indium Corporation, will discuss the impact of the software defined vehicle on hardware design and manufacture. In addition, he will cover how automakers and system designers are addressing future features in their hardware design, the impact of these strategies on the manufacturing of these parts, how safety is rated and reliability targeted and tested. Learn more and register.
- And rounding out the series, on November 14 at 10 am CDT, Brenda Baney, BCubed Consulting, will serve as webinar moderator, guiding expert panelists Yusuf Williams, Harman Automotive Division; Bing Xu, iPoint-systems Gmbh; and Leanne Mallini, Analog Devices, in a discussion on what automakers, startups, and T1s are demanding from their supply chains in terms of sustainability. Panelists will weigh in the top three challenge areas beyond current regulatory reporting and what may be coming next and will touch on recycling, PFAS, carbon neutrality, and the changeover of electronics assembly reporting. Learn more and register.
“These free webinar sessions will allow participants to better understand technology gaps, broaden their professional connections, and uncover strategies for meeting reliability objectives,” said Tracy Riggan, IPC senior director, business development, Solutions. “IPC would like to thank all speakers and moderators for lending their expertise and especially to Indium Corporation for sponsoring the webinar series.”
Share on:
Suggested Items
Altus Highlights Heller Industries Advances in Void Reduction Under 1%
01/06/2025 | Altus GroupAltus Group, a leading distributor of capital equipment in the UK and Ireland, emphasises the importance of reducing voids in reflow soldering to improve manufacturing efficiency and product reliability
The Effects of Copper on a Transmission Line
12/23/2024 | Todd Kolmodin, Gardien ServicesAs technology advances, our substrates become increasingly smaller, and chip technology has progressed to where HDI and UHDI are household terms. Ten years ago, this new design architecture would strike fear in the hearts of any plating engineer. Unfortunately, North American and European manufacturing has lagged due to excessive offshoring of commercial and some high-reliability product lines. Fortunately, most of the military and aerospace product has remained controlled. But in doing so, the designs utilized by the mil/aero and medical sectors’ reliability lines were corralled into the manufacturing capabilities of the North American and European providers.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
The Knowledge Base: The Era of Advanced Packaging
12/23/2024 | Mike Konrad -- Column: The Knowledge BaseThe semiconductor industry is at a pivotal juncture. As the traditional scaling predicted by Moore's Law encounters significant physical and economic barriers, transistor density can no longer double every two years without escalating costs and complications. As a result, the industry is shifting its focus from chip-level advancements to innovative packaging and substrate technologies. I Invited Dr. Nava Shpaisman, strategic collaboration manager at KLA, to provide some insight.
HyRel Announces Sale of First Versacell Robotic System to Leading Defense Contractor
12/03/2024 | HyRelHyRel Technologies, a global provider of quick-turn semiconductor modification solutions, is proud to announce the sale of its first Versacell Robotic Solder Dip & BGA Reballing System to one of the top five defense contractors. Originally developed for internal use, the revolutionary Versacell System drew the attention of the contractor, who recognized its impressive precision, accuracy, and efficiency.
Copyright © 2025 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in