Scrutinizing Solder Printing
September 10, 2024 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes
As members of the technical staff at Indium, Adam Murling, technical manager, and Ron Lasky, senior technologist and professor at Dartmouth University, know their way around metallurgy and solder formulation. I corralled them for a conversation on solder application techniques from the solder’s perspective and their insights did not disappoint.
Nolan Johnson: Adam, what are some threshold moments when you go to solder jetting over solder printing?
Adam Murling: It’s a tandem approach, not all-or-nothing. Let’s say you have a four- or five-mils- (100 to 123 micron) thick stencil, but you also have really fine-pitch BGAs on the same device. There's an argument to be made for not cutting those apertures out because the area ratio will be too challenging.
But then you have a jet or dispenser down the line that can take care of those finer particles, and you want to make sure that the flux chemistry is compatible with the paste you're using in a jet as well as the solder paste on the screen printer; they need to be compatible.
But what happens when things are too large? You have most smaller devices—the 01005s, the 0201s and 0.3-millimeter pitch BGAs, etc.—but you also have connectors that require more solder volume than a 3-mil (75 micron) stencil can provide. You can always use a step stencil—it's been a practice for a long time—but at the same time it causes some process challenges.
If you had both pieces of equipment (stencil printing and jetting) you could then do additive manufacturing and essentially jet the paste on top of your 3-mil (75 micron) height, which was deposited through the stencil, to get more solder volume before placing the connector in place.
Johnson: If you factor in additive manufacturing thinking to solder paste application to get a certain height, does that become a designer concern as much as an assembly concern?
Murling: Nolan, everything's going super small. You're having these automotive manufacturers that are getting into the space and they're not able to find those larger parts that they're comfortable working with anymore. Everyone's focusing more on the smaller devices. They're more readily available with the same power output, but they still need those connectors. You will need a step stencil or you could do the additive approach.
To read this entire conversation, which appeared in the September 2024 issue of SMT007 Magazine, click here.
Suggested Items
Understanding Cleaning Challenges for Automated Solder Paste Dispensing
09/18/2024 | Debbie Carboni, KYZENIn today’s rapidly evolving electronics manufacturing landscape, staying abreast of innovative technologies is crucial. As solder paste and substrate materials continually evolve and become more complex, optimizing production methods with the latest technology ensures performance and quality while reducing operational costs.
Successful Rehm Technology Days 2024 – Where the Future Meets Technology
09/17/2024 | Rehm Thermal SystemsTraditionally, the Rehm Technology Days offer a valuable opportunity for knowledge exchange, networking and discussion. Once again this year, numerous customers, partner companies, press representatives and employees from the worldwide locations met at the company headquarters in Blaubeuren-Seissen.
Circuit Technology Center Announces Expanded Tinning Services Capacity
09/16/2024 | Circuit Technology CenterCircuit Technology Center announces it has expanded its electronic component tinning services capacity. Four (4) Hentec-Odyssey 1325 robotic hot solder dip machines are in full operation to meet the increasing demand from the defense and high-reliability customer base that requires component tinning services for tin whisker mitigation, gold mitigation, and lead re-conditioning.
The Knowledge Base: The Pivotal Role of Solder Paste
09/16/2024 | Mike Konrad -- Column: The Knowledge BaseIn the complex world of electronics manufacturing, the humble solder paste plays a pivotal role. Often overshadowed by more conspicuous electronics assembly equipment and materials, this blend of powdered metal and flux is the unsung hero that binds the electronic circuits together. But beyond its adhesive and conductive properties, the selection of the right solder paste is crucial for ensuring the long-term reliability of electronic devices.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/13/2024 | Marcy LaRont, PCB007 MagazineAt the top of my list is “Silicon to Systems,” an interview with technology experts from IPC: Matt Kelly, Devan Iyer, and Kris Moyer. Also, this week, we hear from I-Connect007 Managing Editor Nolan Johnson, who’s been in Mexico for SMTA Guadalajara. Speaking of Mexico, I want to highlight an interview that appeared in IPC Community between Lorena Villanueva and Barjouth Aguilar of Flex, who talk about the importance of sustainability. I wrap up my recommendations with articles about solder printing and wet process control.