-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
It’s a Wrap for PCB West 2024
October 11, 2024 | Marcy LaRont, PCB007 MagazineEstimated reading time: 3 minutes

PCB West 2024 wraps up Friday, Oct. 11 at the Santa Clara Convention Center (SCCC) in sunny Santa Clara, California. The SCCC is situated next to the “new” Levi’s Stadium, home to the San Francisco 49ers, and directly adjacent to California’s Great America amusement park—both noteworthy landmarks for natives like me. The technical conference, Oct. 8-11, featured 50 technical presentations by 39 different speakers.
PCB West has long been a trade show fixture for the PCB industry on the West Coast and has remained a go-to event for PCB fabricators and suppliers. The straightforward, focused format seems to resonate with both exhibitors and attendees against a backdrop of what has once again become a nearly overwhelming number of annual industry events. The expo on the second day featured just over 100 exhibitors, all with equal-sized tabletop “booths” and no equipment, making an equal playing field for all.
The four-day technical conference included 10 free sessions during expo day, including “Engineering Knowledge Gaps” presented by Stephen Chavez of Siemens and “Nuke the Netlist” presented by Dana Korf of Nano Dimension and Terry Hoffman of Cisco Systems. As one would expect, AI garnered a fair amount of attention. The keynote presentation, “AI Roadmap for PCB Layout: New Opportunities for PCB Designers,” was presented by Charles Pfiel. The day ended with an AI discussion featuring panelists from Circuit Mind, Newgrange Design, Zuken, and Luminovo.
Sustainability is another popular topic, and I enjoyed the presentation by Ramon Roche of NCAB on “PCB and Circularity.” The electronics industry is responsible for over 50 million metric tons of e-waste each year. PCBs are a significant part of that, and the U.S. is lagging far behind other countries in our sustainability initiatives. To illustrate the concept of circularity, Ramon shared an image that expands the three Rs to “reform, reduce, reuse, recycle,” and highlighted the power of PCB design to positively affect sustainability by designing with circularity in mind.
He offered examples of designing thinner boards that require less fiberglass material and designing using additive PCB process technology so there is both less usage of raw materials and less waste. He asked, “Can we design a board with different materials, and perhaps use materials that can be recycled or reused?” In the reality of PCB manufacturing, this remains a daunting proposition. But the message was clear: These conversations must take place and continue as each of us plans for the future.
According to Frances Stewart, vice president of sales and marketing at PCEA, numbers saw a nice bump again this year. “We were delighted to have so many exhibitors come back as well as several new companies join this year,” she said. The show floor stayed busy throughout the day with good energy. It was clear that attendees were happy to be back.
I was pleasantly surprised to see so many old friends and the day went quickly. As one colleague headed off for a long drive north and I dropped another colleague off at the airport, I found myself pondering the state of the U.S. PCB industry once again. It is interesting that amid what often feels like continuous and dramatic technological change, much of the domestic industry over the past three decades has remained largely the same. It is simultaneously both a comfort and a concern, and obviously the focus of groups like PCBAA. What I know for sure is that I am always honored to spend time with the dynamic, intelligent, and fun individuals that make up the PCB industry.
SCROLL BELOW TO VIEW ALL PHOTOS FROM THE EVENT:
Suggested Items
Webinar: INEMI Printed Circuit Board Roadmap
06/13/2025 | iNEMIJoin INEMI PCB Roadmap Chairs Tarja Rapala and Joe Beers for a look at what lies ahead for PCB technologies. This webinar, hosted by INEMI Director of Roadmapping Francis Mullany.
Zuken Autorouters Embrace Collaborative AI
06/12/2025 | Andy Shaughnessy, Design007 MagazineMaybe you’ve never liked autorouters; if so, you’re not alone. As Andy Buja, Zuken’s technical account manager for PCB Solutions, admits, autorouters are not perfect. But today’s autorouters allow designers a greater level of control than ever before, especially routers that incorporate collaborative AI.
American Standard Circuits to Exhibit at IMS 2025
06/12/2025 | American Standard CircuitsAnaya Vardya, President and CEO of American Standard Circuits & ASC Sunstone Circuits, announced that his companies will exhibit at the IEEE International Microwave Symposium (IMS 2025), taking place June 15-20, 2025, at San Francisco’s Moscone Center.
Ventec Strengthens Commitment to Halogen-Free PCB Manufacturing in Europe
06/11/2025 | Ventec International GroupVentec International Group, the PCB materials innovator, manufacturer, supplier and one-stop shop for copper clad laminates, prepregs, as well as process consumables and PCB manufacturing equipment has established volume inventory of halogen-free FR4.1 and FR15.1 PCB materials at its European hub in Germany.
Bridging the Knowledge Gap in Test: A Conversation with Bert Horner
06/11/2025 | Barry Matties, I-Connect007Bert Horner is a seasoned industry veteran and co-creator of The Test Connection, Inc. (TTCI), a test and inspection company spanning over 45 years. In this candid conversation, Bert reflects on the challenges our industry faces with the retirement of career professionals and the subsequent loss of critical tribal knowledge. As he unveils The Training Connection’s innovative training initiatives, Bert emphasizes the importance of evolving educational programs that align with industry needs, particularly in design for test (DFT), and sheds light on strategies being implemented to foster the next generation of engineers.