Build Better 2024 Summit: Creating a Vision for Future Tech
October 18, 2024 | Marcy LaRont, I-Connect007Estimated reading time: 4 minutes
The morning portion kicked off with “The Apple Way, the Motorola Way and the Next Way,” which was described as, “There are lots of ‘ways’ to do electronics NPI and manufacturing. Motorola gave us EVT, DVT, and PVT and Apple gave us execution at scale. What are the core lessons of these methodologies and how are modern organizations honoring or breaking them?” An interesting panel discussion ensued with Zach Scott, head of hardware at Backbone, Matt Hill, senior of device engineering at Snap Inc., and Felix Alvarez, manager of Second Order Effects. Their words were simple but wise: Learn from history but don’t be limited by it; the key to success is continuous, deep learning throughout your career; and (my personal favorite) don’t play by the rules that others have set out for you. Don’t be afraid to take a chance.
In another presentation, Sapana Talwaker, VP of hardware operations at Toast, spoke about scaling manufacturing, and was asked how she defines operational excellence. She responded that operational excellence occurs when operations are closely aligned with the organization’s objectives, when continuous improvement is built into the system, and when it can react and adapt as needed. She cited adaptability as perhaps the single most important characteristic for operational excellence in “the next way.” Toast is a POS platform, which is largely a software product. Talwaker underscored the importance of hardware in a software-focused world, “Hardware is an enabler product for Toast,” she said. Being out of stock is not an option, as it means missing out on much greater revenue opportunities. The two are inextricably linked. One simply does not work without the other—hinting at our industry’s own, “silicon to systems” approach to discussing chips and packaging.
Valentina Ratner, co-founder of AllSpice.io, a collaborative platform for engineers developing new products, gave a presentation on a survey titled “The State of Hardware 2025: 1,000 Engineers on Trends, Challenges, and Toolsets,” which provided data about the things we were pretty sure we already knew.
The greatest challenge for engineers over the past year has been shrinking product development cycles and deadlines. They have spent too many hours a week troubleshooting problems, although it’s probably the most helpful skill making someone a more efficient and effective engineer. In both the latter scenarios, it was pointed out how specific software tools can add tremendous value. Interestingly, they cited the feeling that only 25% of software, hardware, PCB, and firmware companies collaborate effectively. I also found it interesting, especially in view of ever-shrinking product development cycle times, was that 48% of the 1,000 engineers surveyed said they did between three to five iterations per product prior to release. From the conference, it was clear that hardware manufacturing is changing and the integration of high-level software tools that incorporate sophisticated AI functionality will be a very significant part of “the next way” for manufacturing. This is not groundbreaking knowledge for sure, but it is always interesting to see how the varied electronics industry is taking the same language and headed in the same overall direction.
Page 2 of 2Suggested Items
Tritek Hosts Open House at Advanced West’s Facility
11/04/2024 | I-Connect007 Editorial TeamIn this recent conversation with I-Connect007’s Andy Shaughnessy and Barb Hockaday, Steve Kenney, president of Tritek and Advanced West, discusses their long history serving the PCB industry, dating back to when Tritek sold Shipley chemistry in Southern California. During this interview, recorded minutes before an open house at Advanced West in Corona, California, Steve underscores the company’s customer-centric culture and their drive to meet customers' changing requirements in the PCB space.
Flexible Thinking: Musings on High Density Interconnections
10/30/2024 | Joe Fjelstad -- Column: Flexible ThinkingPeople have been using high density interconnection (HDI) technology since the early 1980s, although it was not called HDI until the late 1990s. In the 1970s, ’80s, and early ’90s, engineers used HDI methods to develop hybrid circuits, which were later referred to as multichip modules (MCMs). These were arguably the first instantiation of heterogeneous interconnection technology, which has been the industry buzzword for almost a decade. These devices are a way of integrating multiple chips—both integrated circuits and discrete devices (resistors, capacitors, and inductors)—into a single package, typically using ceramic substrates with layers of insulation and metallic inks (often gold) and firing them at high temperatures.
Scanfil Continues to Succeed in Defending its Profit Margin in Challenging Market
10/29/2024 | ScanfilScanfil updated its outlook for 2024 on 10 June. Scanfil estimates its turnover to be EUR 780–840 (previous, issued on 23 February: 820–900) million, and an adjusted operating profit of EUR 54–61 (57–65) million.
The Chemical Connection: Troubleshooting PCB Process Problems
10/29/2024 | Don Ball -- Column: The Chemical ConnectionAs a supplier of PCB wet processing equipment, we inevitably find ourselves involved in helping customers solve sudden process problems that may or may not be caused by equipment malfunctions. For the most part, equipment problems are relatively easy to identify and repair: sensors for chemistry and equipment control, clogged nozzles and filters, leaks in the plumbing, etc. But what happens when the equipment checks out and the problem is still there?
SMTAI Returns to Its Chicago Roots
10/28/2024 | Nolan Johnson, SMT007 MagazineSMTA International, the anchor conference and exhibition for SMTA, returned to the Stephens Convention Center in Rosemont, Illinois, Oct. 20–24. After a COVID hiatus, followed by two years of co-locating with the MDMA show in Minneapolis, SMTAI went back to its Chicagoland home turf. The 2024 installment of the SMTAI event included more than 110 exhibitors, co-location with The ASSEMBLY Show, over 100 technical papers in the conference, technical forums, social activities, and renewed enthusiasm in the attendants.