DARPA Taps Sikorsky to Add Autonomy to U.S. Army-Owned Black Hawk Helicopter
October 18, 2024 | Lockheed MartinEstimated reading time: 2 minutes

Sikorsky, a Lockheed Martin company, has received a $6 million award from the Defense Advanced Research Projects Agency (DARPA) to install the company’s ALIAS/MATRIX™ flight autonomy system onto the U.S. Army’s experimental fly-by-wire UH-60M Black Hawk® helicopter. Designated MX, the upgraded aircraft will enable the U.S. Army Combat Capabilities Development Command (DEVCOM) to test and evaluate a wide range of autonomy capabilities, from single pilot operation to fully uninhabited flight.
“Autonomy-enabled aircraft will reduce pilot workload, dramatically improve flight safety, and give battle commanders the flexibility to perform complex missions in contested and congested battlespace, day or night in all weather conditions,” said Rich Benton, Sikorsky vice president and general manager. “Soldiers will rely on Black Hawk helicopters into the 2070s, and modernizing the aircraft today will pay dividends for decades across Army Aviation’s current and future aircraft.”
The MATRIX autonomy system forms the core of DARPA's ALIAS (Aircrew Labor In-cockpit Automation System) program. As part of ALIAS in 2020, Sikorsky provided the hardware and engineering support to add fly-by-wire flight controls to the MX aircraft. When combined with the MATRIX autonomy system, the MX aircraft will be a near-exact copy of Sikorsky’s UH-60A fly-by-wire Optionally Piloted Black Hawk helicopter, the company’s flying lab that has tested MATRIX autonomy over hundreds of flight hours.
Sikorsky will integrate the MATRIX system into the MX helicopter in 2025. The aircraft will enable DEVCOM to explore and mature the practical applications and potential concept of operations of a scalable autonomy system. Evaluation will include assessment of different sensor suites to perceive and avoid threats, obstacles and terrain, and develop standards and system specifications interfaced with the MATRIX system and a fly-by-wire flight control system.
In July 2024, Sikorsky and DARPA demonstrated to U.S. military service personnel and senior Department of Defense officials how the Optionally Piloted Black Hawk helicopter can easily be flown and controlled by an operator in the cabin, or on the ground by entering high level mission goals via a tablet.
These recent demonstrations built on autonomous flights at Project Convergence 2022, when Sikorsky and DARPA successfully demonstrated to the U.S. Army how the Optionally Piloted Black Hawk helicopter, operating without humans on board, can safely and reliably perform internal and external cargo resupply missions.
Autonomous capabilities such as MATRIX technology are a key part of Lockheed Martin’s 21st Century Security® vision, which includes modernizing the Black Hawk helicopter to stay ahead of new and emerging threats.
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
United Electronics Corporation Unveils Revolutionary CIMS Galaxy 30 Automated Optical Inspection System
09/11/2025 | United Electronics CorporationUnited Electronics Corporation (UEC) today announced the launch of its new groundbreaking CIMS Galaxy 30 Automated Optical Inspection (AOI) machine, setting a new industry standard for precision electronics manufacturing quality control. The Galaxy 30, developed and manufactured by CIMS, represents a significant leap forward in inspection technology, delivering exceptional speed improvements and introducing cutting-edge artificial intelligence capabilities.
IPS, SEL Raise the Bar for ENIG Automation in North America
09/11/2025 | Mike Brask, IPSIPS has installed a state-of-the-art automated ENIG plating line at Schweitzer Engineering Laboratories’ PCB facility in Moscow, Idaho. The 81-foot, fully enclosed line sets a new standard for automation, safety, and efficiency in North American PCB manufacturing and represents one of the largest fully enclosed final finish lines in operation.
Smart Automation: Odd-form Assembly—Dedicated Insertion Equipment Matters
09/09/2025 | Josh Casper -- Column: Smart AutomationLarge, irregular, or mechanically unique parts, often referred to as odd-form components, have never truly disappeared from electronics manufacturing. While many in the industry have been pursuing miniaturization, faster placement speeds, and higher-density PCBs, certain market sectors are moving in the opposite direction.
Machvision Leads Shift to Automated Inline Final Inspection, AOI in North America
09/10/2025 | Ralph Jacobo, all4-PCBSchweitzer Engineering Laboratories (SEL) chose Machvision inspection equipment due to its capabilities and versatility. Machvision of Taiwan offers circuit inspection, hole inspection and measurement, IC Substrate and HDI inspection, and final visual inspection solutions. The best fit for SEL was the 4.0Pro Circuit Inspection for inner and outer layers, and the AFI6 for final visual inspection of finished panels.
Closing the Loop on PCB Etching Waste
09/09/2025 | Shawn Stone, IECAs the PCB industry continues its push toward greener, more cost-efficient operations, Sigma Engineering’s Mecer System offers a comprehensive solution to two of the industry’s most persistent pain points: etchant consumption and rinse water waste. Designed as a modular, fully automated platform, the Mecer System regenerates spent copper etchants—both alkaline and acidic—and simultaneously recycles rinse water, transforming a traditionally linear chemical process into a closed-loop system.